Abstract:This study embarks on an in-depth exploration of mortar enhanced with Expanded Vermiculite Aggregate (EVA) defined as Expanded Vermiculite Mortar (EVM), aiming to fill notable gaps in the current body of research regarding its acoustic properties and behavior under both quasi-static tensile forces and dynamic compressive loads. Leveraging an extensive series of experimental tests, this research meticulously examines a broad spectrum of physical and mechanical characteristics, including density, water absorption ratio, thermal conductivity, sound absorption coefficient, sound transmission loss, as well as quasi-static compressive and splitting tensile strengths, and dynamic compressive behavior under high-strain rates. Additionally, this study includes a micro-structural analysis to elucidate the impact of expanded vermiculite on the Interfacial Transition Zones (ITZ) between the cement paste and aggregates, providing critical insights into the material’s enhanced performance and failure mechanisms at the microscopic level. This study highlights that the inclusion of EVA in mortar significantly enhances its sound absorption capabilities attributable to the aggregate’s porous structure and the increased overall porosity. Conversely, thermal conductivity tests reveal a marked decrease in heat transfer through the mortar with EVA substitution, underscoring its potential to improve thermal insulation in building applications. The study reveals that while EVA incorporation leads to a decrease in both compressive and tensile strengths of mortar, it introduces beneficial alterations in material behavior, including increased energy absorption and altered failure modes under dynamic loading conditions. The study introduces a probabilistic, data-driven model to predict the Dynamic Increase Factor (DIF) based on strain rate and EVA substitution level, offering novel insights into the material’s behavior under such conditions. This comprehensive investigation not only advances our understanding of EVM’s potential in construction applications but also provides a foundational dataset for future research endeavors aimed at optimizing the material’s composition for enhanced structural and thermo-sound insulation properties.

Vermiculite as a construction material – A short guide for Civil Engineer

Mortar with Natural Light-Weight Expanded Vermiculite Aggregate: Physical and Mechanical Properties

Preparation and Properties of Expanded Vermiculite/Gypsum Thermal Insulation Boards

Study on Mineralogy and Thermal Expansibility of Vermiculit from Tuanfong

Preparation and thermal properties of commercial vermiculite bonded with potassium silicate

Vermiculite Nanomaterials: Structure, Properties, and Potential Applications

Tailoring the Thermal and Mechanical Properties of Lightweight Cement-Based Composites by Macro and Micro Fillers

Replacement of Natural Sand with Expanded Vermiculite in Fly Ash-Based Geopolymer Mortars

Physical and mechanical properties of expanded vermiculite (EV) embedded foam concrete subjected to elevated temperatures

Alkali-activated metakaolin: A short guide for civil Engineer – An overview

Preparation and application of expanded and exfoliated vermiculite: A critical review

Facile Synthesis of Two-Dimensional Natural Vermiculite Films for High-Performance Solid-State Electrolytes

A comprehensive overview about the influence of different additives on the properties of alkali-activated slag – A guide for Civil Engineer

Development of an eco-friendly geopolymer mortar using slag and fly ash with high bentonite content for thermal and environmental applications

A review of recent advances in two-dimensional natural clay vermiculite-based nanomaterials

Valorification of Egyptian volcanic tuff as eco-sustainable blended cementitious materials

Gypsum hemihydrate–cement blends to improve renderings durability

Thermal and Mechanical Properties of Cement Mortar Composite Containing Recycled Expanded Glass Aggregate and Nano Titanium Dioxide

Expanded vermiculite supported capric–palmitic acid composites for thermal energy storage

Effects of ZnO2, ZrO2, Cu2O3, CuO, CaCO3, SF, FA, cement and geothermal silica waste nanoparticles on properties of cementitious materials – A short guide for Civil Engineer

Characteristics of isolation mortars produced with expanded vermiculite and waste expanded polystyrene