Abstract:Extrusion printing of interdigitated electrodes for flexible microsupercapacitors (fMSCs) offers an attractive route to the fabrication of flexible devices where cost, scalability, and processability of ink formulations are critical. In this work, highly concentrated, viscous, and water‐dispersible inks are developed based on graphene oxide (GO)/polyaniline (PANi) composite for extrusion printing. The optimized GO/PANi‐based all‐solid‐state symmetric fMSCs obtained by extrusion printing interdigitated microelectrodes can deliver outstanding areal capacitance of 153.6 mF cm−2 and volumetric capacitance of 19.2 F cm−3 at 5 mV s−1. It is shown that by fabricating asymmetric fMSCs using the GO/PANi as positive electrode and a graphene‐based negative electrode, the voltage window can be widened from 0.8 to 1.2 V and improvements can be achieved in energy density (from 3.36 to 4.83 mWh cm−3), power density (from 9.82 to 25.3 W cm−3), and cycling stability (from 75% to 100% capacitance retention over 5000 cycles) compared with the symmetric counterpart. The simple ink preparation and facile device fabrication protocols reported here make the scalable fabrication of extrusion printed fMSCs a promising technology. A concentrated, viscous, and water‐dispersible ink comprised of graphene oxide/polyaniline hierarchical structure is facilely prepared with the stabilizer of poly(3,4‐ethylenedioxythiophene): poly(styrenesulfonate) for extrusion printing. The printed symmetric microsupercapacitors can deliver outstanding areal and volumetric capacitance. The technique is also applicable to prepare asymmetric microsupercapacitors, which exhibit improved performance (i.e., energy, power densities, and cycling stability) than the symmetric ones.

All-solid-state micro-supercapacitors based on inkjet printed graphene electrodes

All solid-state micro-supercapacitors using ionogel electrolyte

Carbon-Based Flexible and All-Solid-State Micro-supercapacitors Fabricated by Inkjet Printing with Enhanced Performance

Engineered Electrode Structure for High‐Performance 3D‐Printed All‐Solid‐State Flexible Microsupercapacitors

Graphene Aerogel Ink for the Inkjet Printing of the Micro-Supercapacitors

Flexible, in-plane, and all-solid-state micro-supercapacitors based on printed interdigital Au/polyaniline network hybrid electrodes on a chip

Direct Inkjet Printing of Aqueous Inks to Flexible All-Solid-State Graphene Hybrid Micro-Supercapacitors.

Planar Micro-Supercapacitors with High Power Density Screen-Printed by Aqueous Graphene Conductive Ink

Drying-Mediated Self-Assembly of Graphene for Inkjet Printing of High-Rate Micro-supercapacitors

Boosting areal energy density of 3D printed all-solid-state flexible microsupercapacitors via tailoring graphene composition

Direct laser writing of micro-supercapacitors on hydrated graphite oxide films

Facile assembly of solid-state on-chip planar micro-supercapacitors based on graphene quantum dots with overall electrochemical properties

Scalable production of graphene inks via wet-jet milling exfoliation for screen-printed micro-supercapacitors

Laser photonic-reduction stamping for graphene-based micro-supercapacitors ultrafast fabrication

Stamping Fabrication of Flexible Planar Micro‐Supercapacitors Using Porous Graphene Inks

Simplified Fabrication of High Areal Capacitance All-Solid-state Micro-Supercapacitors Based on Graphene and MnO2 Nanosheets

Self-assembly of graphene-based planar micro-supercapacitor with selective laser etching-induced superhydrophobic/superhydrophilic pattern

Recent advances in graphene-based planar micro-supercapacitors for on-chip energy storage

Development of Graphene Oxide/Polyaniline Inks for High Performance Flexible Microsupercapacitors via Extrusion Printing

Laser-processed graphene based micro-supercapacitors for ultrathin, rollable, compact and designable energy storage components

High-Performance All-solid-state microsupercapacitors from 3D printing Structure-engineered Graphene-Carbon sphere electrodes