Abstract:Remaining useful life prediction (RUL) is a key component in the application of prognostics and health management associated with devices or systems. But such RUL predictions are cumbersome owing to complexities from external effects and internal degradation mechanisms within systems. Specifically, it is common for degradation processes to comprise distinct multiple stages rather than just one uniform stage in many mechanical systems. In particular, the two‐stage degradation modeling for RUL prediction based on the Wiener process with linear drift has received significant attention in recent years. However, negative effects of measurement errors and stochasticity of the degradation states are generally excluded from current degradation modeling, which causes inaccuracy problems that can impact system maintenance schedules and operational efficiency. Therefore, to solve such problems, measurement errors are considered in this paper and a two‐stage degradation model is proposed, in which an adaptive term is also characterized by the Wiener process. The transition probability density function (TPDF) of the degradation state at the two‐stage changing point is derived and an analytical solution for the RUL is obtained under the concept of the first hit time (FHT). A Kalman filter and smoothing algorithm are introduced to estimate variables, and the expectation maximization (EM) algorithm is applied to update and estimate model parameters. Finally, the effectiveness and applicability of the proposed model in RUL predictions are verified through numerical simulation and a case study of bearings.

Remaining useful life estimation based on Wiener degradation processes with random failure threshold

Remaining useful life prediction for degradation processes based on the Wiener process considering parameter dependence

Remaining useful life evaluation for accelerated Wiener degradation process model with mixed random effects and measurement errors

Remaining useful life estimation using an inverse Gaussian degradation model

Remaining Useful Life Prediction for a Nonlinear Heterogeneous Wiener Process Model With an Adaptive Drift

Two‐stage degradation modeling for remaining useful life prediction based on the Wiener process with measurement errors

Adaptive Wiener process-based remaining useful life prediction method considering multi-source variability

Remaining Useful Life Prediction for Non-Markovian Degrading Systems with Multiple Working Conditions.

A Wiener-process-based Degradation Model with a Recursive Filter Algorithm for Remaining Useful Life Estimation

Remaining Useful Life Prediction for Nonlinear Degrading Systems with Maintenance

Remaining useful life estimation – A review on the statistical data driven approaches

Remaining useful life prediction for degrading systems with random shocks considering measurement uncertainty

A general time-varying Wiener process for degradation modeling and RUL estimation under three-source variability

Remaining Useful Life Prediction under Multiple Fault Patterns for Degradation Processes with Long-Range Dependence.

Remaining Useful Life Prediction of Lithium-Ion Batteries Based on the Wiener Process with Measurement Error

A probabilistic estimation of remaining useful life from censored time-to-event data

A novel equipment remaining useful life prediction approach considering dynamic maintenance threshold

Remaining useful life prediction using nonlinear multi-phase Wiener process and variational Bayesian approach

A random effects Wiener process model with acceleration factors for remaining useful life prediction

Remaining useful life prediction for bivariate deteriorating systems under dynamic operational conditions

Remaining Useful Life Prediction Method by Integrating Two-Phase Accelerated Degradation Data and Field Information