Abstract:With the increasing consumption of oil in the world and increasing production of oil from oil reservoirs, the reservoir pressure starts to decrease. On the other side, the use of oil leads to an increase in carbon dioxide production in the environment and causes global warming. One of the effective methods of reducing the amount of carbon dioxide emitted into the atmosphere and increasing the reservoir's pressure is CO2‐EOR and carbon capturing and storing (CCS) which injects produced carbon dioxide from industrial sources into underground reservoirs. Carbon dioxide reduces oil viscosity and increases oil mobility producing an economical state. Moreover, with CO2‐EOR and CCS carbon dioxide can be stored in a depleted reservoir and helps reduce pollution and global warming. Besides the environmental and economic benefits due to reducing carbon dioxide emissions to the atmosphere and increasing oil production, CO2 injection causes various problems in the formation. Many experiments indicate that asphaltene precipitation and wettability alteration caused by asphaltene, dissolution/precipitation of rock, salt precipitation, and sludge formation are some of the problems that occur during CO2 injection operations in low pressure and temperature. However, few experiments evaluate asphaltene precipitation effective factors, such as pressure, injection rates, temperature, etc., in high temperatures and pressure (HPHT) near reservoir conditions. Therefore, there was a need for a comprehensive investigation of various factors and the impact of each of them on the asphaltene precipitation and formation damage in HPHT conditions, so this research was designed to help future simulation and industrial utilization. A core‐flood setup was prepared to conduct CO2 flooding experiments and formation damage studies in HPHT conditions. The main objective of this study was to evaluate the effect of different parameters including pressure, injection rate, and type of injected gas on asphaltene and its effect on formation damage caused by CO2 injection. The second goal of this study was to investigate the optimum injection in every section. The third goal was to determine the oil recovery during the process of CO2 injection in different conditions. The results showed that an injection rate of 0.1 cc/min and higher injection pressures minimized asphaltene precipitation and maximized oil recovery. Replacing CO2 with natural gas liquids (NGL) gas reduced oil production and asphaltene precipitation. Overall, the experiments demonstrated the importance of optimizing injection parameters to limit formation damage during CO2 flooding. © 2024 The Authors. Greenhouse Gases: Science and Technology published by Society of Chemical Industry and John Wiley & Sons Ltd.

Experimental investigation of miscibility conditions of dead and live asphaltenic crude oil–CO2 systems

CO2 and Alkane Minimum Miscible Pressure Estimation by the Extrapolation of Interfacial Tension

Visualization of CO 2 -oil vanishing interface to determine minimum miscibility pressure using microfluidics

Enhanced Solubility and Miscibility of CO2-Oil Mixture in the Presence of Propane under Reservoir Conditions to Improve Recovery Efficiency

Investigating the vaporization mechanism's effect on interfacial tension during gas injection into an oil reservoir

Research on Minimum Miscible Pressure Between Crude Oil and Supercritical Carbon Dioxide System in Ultra-Low Permeability Reservoir by the Long-Slim-Tube Experiment Method

Improved fluid characterization and phase behavior approaches for gas flooding and application on Tahe light crude oil system

Pore-scale characterization of carbon dioxide storage at immiscible and near-miscible conditions in altered-wettability reservoir rocks

Experimental Study on Oil-Gas Interaction Mechanism during Offshore Heavy Oil Gas Injection

Molecular Insights into CO2 Diffusion Behavior in Crude Oil

Experimental investigation of CO2 storage and oil production of different CO2 injection methods at pore-scale and core-scale

Chemical strategies for enhancing CO 2 -Hydrocarbon miscibility

Chemical-assisted minimum miscibility pressure reduction between oil and methane

Experimental investigating of the effect of CO2 injection parameters on asphaltene precipitation and formation damage in live oil

New Insights into the Interfacial Phenomena during Miscible Displacement by Hydrocarbon Solvents and CO2 in Heavy Oil Reservoirs

Molecular Dynamics Simulation of Miscible Process in CO2 and Crude Oil System

Impact of nanopore confinement on phase behavior and enriched gas minimum miscibility pressure in asphaltenic tight oil reservoirs

In Situ Pore-Scale Analysis of Oil Recovery During Three-Phase Near-Miscible CO2 Injection in a Water-Wet Carbonate Rock

Insight into miscibility mechanism of multiple components crude oil in CO2/CH4 by molecular dynamic simulation

Miscibility Characteristics of CO2-Oil in Tight Sandstone Reservoirs: Insights from Molecular Dynamics Simulations

An experimental investigation of liquid CO2-in-water emulsions for improving oil recovery