Abstract:Adjacent excavations may have adverse impacts on the existing tunnels. Due to the increasing demand for building excavations in close proximity to existing metro tunnels, ensuring the safety and integrity of tunnel structures is a major challenge for city designers and geotechnical engineers. Urban metro tunnels in soft areas of Chinese cities are often constructed using shield tunnelling technology, and the installed precast reinforcement concrete segmental lining are generally connected together by various steel bolts. Due to the presence of joints, the overall tunnel stiffness, including the bending stiffness and shearing stiffness, are significantly reduced. Due to the reduction in shearing stiffness, the tunnel longitudinal deformation can be decomposed into two distinct modes: a bending mode and a shearing dislocation mode. However, current methods for predicting tunnel longitudinal responses to adjacent excavations generally simplify a tunnel as an Euler-Bernoulli beam, which only considers the bending effect and ignores the shearing deformation of jointed tunnels. Moreover, tunnel-ground interactions are commonly considered through the Winkler foundation model, which is unable to account for the interactions of adjacent springs and leads to overestimations of shear forces and bending moments in shield tunnels. In this paper, a new analytical method is proposed that uses a Timoshenko beam to simulate jointed shield tunnel responses when subjected to an adjacent excavation, which can consider both the bending and shearing effects of a shield tunnel. The tunnel-ground interaction is considered by introducing Pasternak two-parameter foundation, which is able to further take account for the interaction between adjacent springs. The tunnel-excavation interaction is analyzed using a two-stage analysis method. First, the excavation-induced unloading stress on the existing tunnel is computed using Mindlin’s solution. Second, the tunnel longitudinal deformation due to the corresponding stress is calculated using finite difference method. The effectiveness of the proposed approach is validated by two well-document case histories, including finite element analysis and field measurement. The predicted results are also compared with those obtained using the traditional methods. Based on the verified analytical solution, a parametric analysis is also conducted to investigate the effects of key factors on the responses of existing tunnels, including excavation-tunnel relative position, ground Young’s modulus and equivalent shearing stiffness.

Determining the Cause of Damages in a Multiarch Tunnel Structure through Field Investigation and Numerical Analysis

Simplified analytical method for evaluating the effects of adjacent excavation on shield tunnel considering the shearing effect

Theoretical Analysis of Longitudinal Vertical Displacement of Subway Tunnels Caused by the Construction of Steel Casings for Bridge Piles

Numerical Analysis of the Influence of Tunneling on Ground Movement and Adjacent Frame Structure

Numerical Analysis of the Influence of Tunnel Construction on Adjacent Masonry Structure

Determining the cause of tunnel damages during tunneling in silty clay

Damage management and safety evaluation for operating highway tunnels: a case study of Liupanshan tunnel

Study on Effect of Double-line Parallel Shield Tunneling Side-crossing on Adjacent Frame Structures

Numerical Analysis of DOT Shield 45 degrees crossing the Masonry Structure Buildings

Study on Stress Characteristics of Multi-arch Tunnel Lining under Weak Surrounding Rock Conditions Based on Field Measurement

Numerical Analysis on the Structure Type and Mechanical Response of Tunnel Crossing Active Reverse Fault

Analysis of Damage Mechanism of Tunnel Lining Structure under the Coupling Action of Active Fault

Damage and reliability analysis of double-arch tunnel without a middle pilot tunnel under blast load

Experimental and numerical study of the failure mechanism and stability of tunnel linings under different cavity conditions

Numerical Computing Research on Tunnel Structure Cracking Risk under the Influence of Multiple Factors in Urban Deep Aquifer Zones

Numerical Analysis on the Excavation Damage Evolutions of Layered Tunnels: Investigations on the Influences of Confining Pressure and Layer Angles

Cracking performance of asymmetric double-arch tunnels due to the voids behind linings

Seismic Dynamic Response and Lining Damage Analysis of Curved Tunnel under Shallowly Buried Rock Strata

Study on Dynamic Response Characteristics and Damage Mechanism of Tunnel Lining at Entrance of Shallow Bias Tunnel

Research about Effect of Cavity Behind Lining on Structural Safety of Tunnel in Active Service

Numerical Modeling of Reverse Fault Rupture and Its Impact on Mountain Tunnels