Abstract:A simple in‐situ and scalable for large‐scale production approach involving floating catalytic chemical vapor deposition (FCCVD) is proposed for preparing SiOx/CNT composite films with excellent mechanical and electrochemical properties make the film suitable for direct use for LIB anodes and maintain structural stability after long cycling at the current density of 0.1 A g−1. Silicon monoxide (SiOx) has become one of the most promising anode materials for next‐generation lithium‐ion batteries (LIBs) due to its high theoretical capacity. However, the inherent low electrical conductivity and large volume change during lithiation/delithiation processes hinder its practical applications. Here, a novel and facile strategy is designed to prepare SiOx/carbon nanotube (CNT) composite films in one step by using a method involving floating catalytic chemical vapor deposition (FCCVD). That is, SiOx particles and CNTs form at high temperature and winded directly on a drum to give rise to a film in an open air environment. The composite film is made up of a 3D CNT network with SiOx particles uniformly embedded. The as‐prepared composite film not only has a tensile strength of 78 MPa and elongation at break of 52%, but also exhibits a high specific capacity of 966.4 mA h g−1 after 120 cycles at the current density of 0.1 A g−1 and a good rate capacity of 448.7 mA h g−1 at the current density of 2 A g−1 when used as an anode material for LIBs. The results from the in‐situ preparation and resultant composite suggest a new route for developing high‐performance anode materials for LIBs.

High cycling performance Si/CNTs@C composite material prepared by spray–drying method

A Facile, One-Step Synthesis of Silicon/Silicon Carbide/Carbon Nanotube Nanocomposite as a Cycling-Stable Anode for Lithium Ion Batteries

Hierarchically porous-structured ZnxCo1−xS@C–CNT nanocomposites with high-rate cycling performance for lithium-ion batteries

In situ Preparation of SiOx/Carbon Nanotube Composite Films with Excellent Mechanical and Electrochemical Properties as an Anode Material for Lithium‐Ion Batteries

Si/C nanocomposite anode materials by freeze-drying with enhanced electrochemical performance in lithium-ion batteries

Enhanced Cycle Stability of Micro-Sized Si/C Anode Material with Low Carbon Content Fabricated Via Spray Drying and in Situ Carbonization

A high performance silicon/carbon composite anode with carbon nanofiber for lithium-ion batteries

Low pressure preparation of spherical Si@C@CNT@C anode material for lithium-ion batteries

Spray drying-assisted preparation FeSx/C/CNT composite for energy storage and conversion performance

A Study of CNT Fiber-Reinforced Multi-Carbon Resource-Coated SiOx Composite As Anode Materials

High-performance silicon-carbon anode material via aerosol spray drying and magnesiothermic reduction

Pyrolytic Carbon-Coated Silicon/carbon Nanofiber Composite Anodes for High-Performance Lithium-Ion Batteries

A strategy and detailed explanations to the composites of Si/MWCNTs for lithium storage

Building sandwich-like carbon coated Si@CNTs composites as high-performance anode materials for lithium-ion batteries

Preparation and properties of porous silicon anode coated with nitrogen-doped carbon for lithium-ion battery

Enhanced Rate Capability by Employing Carbon Nanotube-Loaded Electrospun Si/C Composite Nanofibers As Binder-Free Anodes

A facile in situ synthesis of SiC&Si@CNT composite 3D frameworks as an anode material for lithium-ion batteries.

Long-cycle and High-rate Si/SiOx/Nitrogen-doped Carbon Composite as an Anode Material for Lithium-ion Batteries

Simple preparation of Si/CNTs/C composite derived from photovoltaic waste silicon powder as high-performance anode material for Li-ion batteries

Scalable synthesis of γ-Fe2O3/CNT composite as high-performance anode material for lithium-ion batteries

A high-performance silicon/carbon composite as anode material for lithium ion batteries