Abstract:The purpose of this research is to develop a practical system for building damage detection in dense urban areas after natural disasters such as earthquakes, typhoons, and tsunamis. A novel approach is presented that allows real-time building change detection using high resolution aerial images and existing 3D building data. The developed system contains two major processing modules: inflight processing and ground processing. Inflight processing module mainly extracts feature information from images acquired by an airborne digital camera, and compresses them in order to transfer to the ground. Ground processing module is responsible to analyze building changes by comparing the feature information to the existing 3D data. The automated change detection is performed by the following steps: firstly, edge features of all buildings in the aerial images are extracted on board of an aircraft; Then, the outlines of each building, which are extracted from the 3D building data, are projected onto the images based on the interior and exterior orientation parameters of the camera, and compared to the extracted edge features of each building in the images. The Portion Hausdorff Matching is applied to calculate the similarities between the projected outlines and the extracted edge features. Finally, collapsed buildings are detected using the calculated similarities. The maximal similarity between the edge features and the projected outlines in the direction of projection can be used to detect the change in building height. This approach is verified using an airborne digital camera UltraCamD image and corresponding 3D building data of Tokyo, Japan. The heights of some buildings in the 3D building data are manually modified in order to simulate building changes. The experimental results show that among 1320 buildings used in the test, 45 buildings are successfully detected as collapsed or removed. Among them, 9 buildings are correctly detected out of 10 collapsed buildings. Also, 2885 buildings are used in another test for detecting changes in building heights. 11 of the 27 buildings known to have height changes are successfully detected. The experimental results indicate that the proposed approach shows great potential for practical applications although still faces challenges from factors such as inaccurate 3D building data, occlusions due to high building density, and small changes in building height. ©2009 IEEE.

Estimation of the disaster building domain using RapidEye data to estimate the amount of disaster waste

Integrated Detection and Analysis of Earthquake Disaster Information Using Airborne Data

Assessment of the degree of building damage caused by the 2010 Yushu, China earthquake using satellite and airborne data

Advances in Rapid Damage Identification Methods for Post-Disaster Regional Buildings Based on Remote Sensing Images: A Survey

Estimation of Human Condition at Disaster Site Using Aerial Drone Images

Rapid Fine-Grained Damage Assessment of Buildings on a Large Scale: A Case Study of the February 2023 Earthquake in Turkey

Rapid Mapping of Volcanic Eruption Building Damage: A Model Based on Prior Knowledge and Few-Shot Fine-Tuning

Extraction of earthquake-induced collapsed buildings using very high-resolution imagery and airborne lidar data

Post-earthquake assessment of building damage degree using LiDAR data and imagery

A Fast Debris Flow Disasters Areas Detection Method of Earthquake Images in Remote Sensing System

Building change detection using aerial images and existing 3D data

Natural Disaster Classification using Aerial Photography Explainable for Typhoon Damaged Feature

Rapid Monitoring of Japan Earthquake-triggered Tsunami Disaster Based on a Fusion of Multiple Features Derived from HJ Small Satellite Images

URBAN BUILDING COLLAPSE DETECTION USING VERY HIGH RESOLUTION IMAGERY AND AIRBORNE LIDAR DATA

Incorporating multi-source remote sensing in the detection of earthquake-damaged buildings based on logistic regression modelling

Estimating the Numbers and the Areas of Collapsed Buildings by Combining VHR Images, Statistics and Survey Data: a Case Study of the Lushan Earthquake in China

Learning from multimodal and multitemporal earth observation data for building damage mapping

Using 3-D Convolution and Multimodal Architecture for Earthquake Damage Detection Based on Satellite Imagery and Digital Urban Data

Improving the accuracy of near real-time seismic loss estimation using post-earthquake remote sensing images

Integrating post-event very high resolution SAR imagery and machine learning for building-level earthquake damage assessment

Intelligent Assessment of Building Damage of 2023 Turkey-Syria Earthquake by Multiple Remote Sensing Approaches