Abstract:A nanofibrous polyimide (PI) framework‐derived composite electrolyte with a thickness of 17.5 μm is fabricated to ensure good mechanical and electrochemical performances. With the composite electrolyte, the dendrite‐free and favorable cycling performance could be realized and acceptable electrochemical performance is effectuated in LiNi0.5Co0.2Mn0.3O2 (NCM523) solid battery via in situ formation of LiF, N‐species containing electrode/electrolyte interphase. Polyethylene oxide (PEO) based polymer electrolytes show promise in expanding the practical applications of lithium (Li) batteries. However, their applications in Li batteries are usually restricted owing to the lack of mechanical strength, poor oxidative stability, and relatively large thickness. Herein, a nanofibrous polyimide (PI) framework enhanced plasticized‐PEO solid electrolyte is prepared to realize good mechanical and electrochemical performances. Following the configuration with the PI matrix, this "polymer in polymer" composite electrolyte with a thickness of 17.5 μm exhibits enhanced mechanical strength (13.9 MPa) and outstanding thermal stability. Additionally, it preserves the high ionic conductivity (2.25 × 10−4 S cm−1, 25 °C). The Li||Li symmetrical battery with the modified electrolyte could achieve a steady Li plating/stripping of more than 500 h, and the critical current density reaches up to 0.6 mA cm−2 at ambient temperature. The LiFePO4 batteries delivery favorable capacity of 132.2 mAh g−1 with capacity retentions of 96.4% and 85.9% after 500 and 1000 cycles at 1 C, respectively. Acceptable cycling performance also could be achieved in LiNi0.5Co0.2Mn0.3O2 solid batteries via an inorganic‐rich artificial cathode electrolyte interphase.

Thin-film electrode based on zeolitic imidazolate frameworks (ZIF-8 and ZIF-67) with ultra-stable performance as a lithium-ion battery anode

Green Fabrication of Sandwich-Like and Dodecahedral C@Fe3O4@C As High-Performance Anode for Lithium-Ion Batteries

Metal-organic Framework Nanosheets-Guided Uniform Lithium Deposition for Metallic Lithium Batteries

Fe-ZIF@C with Porous Nanostructure as Anode Material for Lithium-Ion Batteries

V 2 O 5 @ZIF-8 with a Stable Structure and a Fast Ion Diffusion Channel as a Promising Cathode Material for Lithium-Ion Batteries

Advancing Anode-Less Lithium Metal Batteries: ZnF2 Modification and In-Situ Structural Regulation for Enhanced Performance

Rational design of 3D N-doped carbon nanosheet framework encapsulated ultrafine ZnO nanocrystals as superior performance anode materials in lithium ion batteries

N-doped ZIF-8-derived Carbon (NC-ZIF) As an Anodic Material for Lithium-Ion Batteries

In Situ Growth of ZnO Nanodots on Carbon Hierarchical Hollow Spheres As High-Performance Electrodes for Lithium-Ion Batteries

Single Iron Atom Anchored on ZIF‐8 Derived Carbon Framework to Directionally Regulate Lithium Deposition with Minimum Nucleation Overpotential

ZIF-8-derived ultrasmall ZnO nanoparticles embedded in porous carbon nanocage as anode material for lithium-ion batteries

Fluorinated Interface Layer with Embedded Zinc Nanoparticles for Stable Lithium-Metal Anodes.

3-Dimensional Hierarchically Porous ZnFe2O4/C Composites with Stable Performance As Anode Materials for Li-ion Batteries

ZnO Nanomembrane/Expanded Graphite Composite Synthesized by Atomic Layer Deposition As Binder-Free Anode for Lithium Ion Batteries

ZnO/carbon framework derived from metal-organic frameworks as a stable host for lithium metal anodes

ZrO2 Thin Film Protected Li Metal Anode for Improved Electrochemical Performance

ZIF-8 Derived ZnFe2O4 Nanoparticles As a High-Performance Anode Material for Lithium-Ion Batteries

Thin Solid Polymer Electrolyte with High‐Strength and Thermal‐Resistant via Incorporating Nanofibrous Polyimide Framework for Stable Lithium Batteries

Layered Double Hydroxide Nano- and Microstructures Grown Directly on Metal Substrates and Their Calcined Products for Application as Li-Ion Battery Electrodes

Three-Dimensional (3D) Nanostructured Skeleton Substrate Composed of Hollow Carbon Fiber/Carbon Nanosheet/ZnO for Stable Lithium Anode

Rationally designed N, P Co-doped porous film via steam etching as self-supported binder-free anode for high-performance lithium-ion battery