Abstract:With the rapid development of foldable electronics in recent years, flexible energy storages have received extensive attention. As the key component, several prototypes such as flexible supercapacitors, li-ion batteries, and solar cells have been developed for practical application. However, low theoretical energy density of these power storages will limit their application in new flexible device. Therefore, non-aqueous lithium-air batteries have been developed for their extremely high theoretical specific energy density about 3600 Wh·kg-1, 3-5 times higher than that of the current lithium-ion batteries1, 2. When used in ambient air as flexible batteries, several problems must be overcome: (1) lithium anode should be protected from CO2 and H2O, (2) catalyst of high activity towards oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) should be introduced at lower oxygen partial pressure3. Thus the structure of the air cathode should be optimized. Macroporous along with mesoporous with high specific surface area should be introduced for the effective adsorption of O2 on the active sites, as well as the enhanced transportation of the reactants and intermediate species on the catalyst4. In our studies, mesoporous CeO2 microspheres were synthesized through hydrothermal process on 3D macrospores graphene foam as flexible cathode. CeO2 microspheres with the size of ~ 300 nm are distributed uniformly on the surface of 3D graphene foam with carbon coated for enhanced electrical conductivity. With the macroporous provided by 3D graphene foam for O2 diffusion and the mesoporous CeO2for enhanced catalytic activity towards ORR and OER, the LABs show better reversible capacity. And the detailed morphological and electrochemical analysis will be discussed in the presentation. References [1] P. G. Bruce, S. A. Freunberger, L. J. Hardwick and J. M. Tarascon, Nat. Mater., 11, 19 (2012). [2] A. C. Luntz and B. D. McCloskey, Chem. Rev., 114, 11721 (2014). [3] J. Yi, X. Liu, S. Guo, K. Zhu, H. Xue, H. Zhou, ACS Appl. Mater. Inter., 7, 23798 (2015). [4] J.-J. Xu, Z.-L. Wang, D. Xu, F.-Z. Meng and X.-B. Zhang, Energy Environ. Sci., 7, 2213 (2014).

3D nitrogen-doped graphene foam with encapsulated germanium/nitrogen-doped graphene yolk-shell nanoarchitecture for high-performance flexible Li-ion battery

Three-Dimensional Double-Walled Ultrathin Graphite Tube Conductive Scaffold with Encapsulated Germanium Nanoparticles as a High-Areal-Capacity and Cycle-Stable Anode for Lithium-Ion Batteries

Nitrogen-doped holey graphene foams for high-performance lithium storage

Flexible 3D Porous MXene Foam for High-Performance Lithium-Ion Batteries

Compressible Neuron-like 3D Few-Layered MoS<sub>2</sub>/N-Doped Graphene Foam as Freestanding and Binder-Free Electrodes for High-Performance Lithium-Ion Batteries

Compressible Neuron-like 3D Few-Layered MoS 2 /N-Doped Graphene Foam as Freestanding and Binder-Free Electrodes for High-Performance Lithium-Ion Batteries

A Graphene Foam Electrode with High Sulfur Loading for Flexible and High Energy Li-S Batteries

Porous Multishelled Nio Hollow Microspheres Encapsulated Within Three-Dimensional Graphene As Flexible Free-Standing Electrodes For High-Performance Supercapacitors

Flexible nitrogen-doped graphene/SnO 2 foams promise kinetically stable lithium storage

3D Hierarchically Porous NiO/Graphene Hybrid Paper Anode for Long-Life and High Rate Cycling Flexible Li-ion Batteries

Nitrogen, Oxygen‐Codoped Vertical Graphene Arrays Coated 3D Flexible Carbon Nanofibers with High Silicon Content as an Ultrastable Anode for Superior Lithium Storage

GeP 3 /NbX 2 (X=S, Se) Nano-Heterostructures: Promising Isotropic Flexible Anodes for Lithium-Ion Batteries with High Lithium Storage Capacity

3D Holey-Graphene Frameworks Cross-Linked with Encapsulated Mesoporous Amorphous FePO4 Nanoparticles for High-Power Lithium-Ion Batteries

Sandwiching Defect-Rich TiO2-δ Nanocrystals into a Three-Dimensional Flexible Conformal Carbon Hybrid Matrix for Long-Cycling and High-Rate Li/Na-Ion Batteries.

Flexible Graphene-Wrapped Carbon Nanotube/Graphene@MnO 2 3D Multilevel Porous Film for High-Performance Lithium-Ion Batteries.

Graphene Foam Decorated With Ceria Microspheres As A Flexible Cathode For Foldable Lithium-Air Batteries

Carbon Coated Mesoporous CeO2 on Graphene Foam As Flexible Cathode in Lithium-Air Batteries

Integration of Graphene, Nano Sulfur, and Conducting Polymer into Compact, Flexible Lithium-Sulfur Battery Cathodes with Ultrahigh Volumetric Capacity and Superior Cycling Stability for Foldable Devices

Needle‐like NiCo2O4 Coated on Graphene Foam As a Flexible Cathode for Lithium‐Oxygen Batteries

Three-dimensional graphene foam supported Fe₃O₄ lithium battery anodes with long cycle life and high rate capability.

3d Nitrogen-Doped Graphene Foams Embedded With Ultrafine Tio2 Nanoparticles For High-Performance Lithium-Ion Batteries