Abstract:The outstanding locomotor and manipulation characteristics of the octopus have recently inspired the development, by our group, of multi-functional robotic swimmers, featuring both manipulation and locomotion capabilities, which could be of significant engineering interest in underwater applications. During its little-studied arm-swimming behavior, as opposed to the better known jetting via the siphon, the animal appears to generate considerable propulsive thrust and rapid acceleration, predominantly employing movements of its arms. In this work, we capture the fundamental characteristics of the corresponding complex pattern of arm motion by a sculling profile, involving a fast power stroke and a slow recovery stroke. We investigate the propulsive capabilities of a multi-arm robotic system under various swimming gaits, namely patterns of arm coordination, which achieve the generation of forward, as well as backward, propulsion and turning. A lumped-element model of the robotic swimmer, which considers arm compliance and the interaction with the aquatic environment, was used to study the characteristics of these gaits, the effect of various kinematic parameters on propulsion, and the generation of complex trajectories. This investigation focuses on relatively high-stiffness arms. Experiments employing a compliant-body robotic prototype swimmer with eight compliant arms, all made of polyurethane, inside a water tank, successfully demonstrated this novel mode of underwater propulsion. Speeds of up to 0.26 body lengths per second (approximately 100 mm s(-1)), and propulsive forces of up to 3.5 N were achieved, with a non-dimensional cost of transport of 1.42 with all eight arms and of 0.9 with only two active arms. The experiments confirmed the computational results and verified the multi-arm maneuverability and simultaneous object grasping capability of such systems.

Hybrid parameter identification of a multi-modal underwater soft robot

Propulsion Optimization of a Jellyfish-Inspired Robot Based on a Nonintrusive Reduced-Order Model with Proper Orthogonal Decomposition

Parameter Optimization of the Bio-Inspired Robot Propulsion Through the Deep Learning Based Reduced Order Fluid-Structure Interaction Model

Design and Modeling of a Novel Biomimetic Robot Inspired by Water Strider

Biomimetic Flexible/compliant Sensors for a Soft-Body Lamprey-Like Robot

Hydrodynamic Modeling and Parameter Identification of a Bionic Underwater Vehicle: RobDact

Octopus-inspired multi-arm robotic swimming

Multimodal Soft Amphibious Robots Using Simple Plastic-Sheet-Reinforced Thin Pneumatic Actuators

Proprioceptive Sensing of Soft Tentacles with Model Based Reconstruction for Controller Optimization

Inertial Parameter Identification Including Friction and Motor Dynamics

Hybrid strategy based model parameter estimation of irregular-shaped underwater vehicles for predicting velocity

Development of Bioinspired Multimodal Underwater Robot "HERO-BLUE" for Walking, Swimming, and Crawling

Bioinspired locomotion and grasping in water: the soft eight-arm OCTOPUS robot

Utilizing Bioinspired Soft Modular Appendages for Grasping and Locomotion in Multi-Legged Robots on Ground and Underwater

Multimodal locomotion ultra-thin soft robots for exploration of narrow spaces

Pleobot: a modular robotic solution for metachronal swimming

CFD-based multi-objective controller optimization for soft robotic fish with muscle-like actuation

Modeling and implementation of a novel amphibious robot with multimode motion

Design, modeling and control of a miniature bio-inspired amphibious spherical robot

Nonbiomorphic Passively Adaptive Swimming Robot Enables Agile Propulsion in Cluttered Aquatic Environments

A Hybrid Territorial Aquatic Bionic Soft Robot with Controllable Transition Capability