Abstract:The isothermal tensile test of medium carbon steel material was conducted at deformation temperatures varying from 650 to 950 ∘ C with an interval of 100 ∘ C and strain rates ranging from 0.05 to 1.0 s − 1 . In addition, the scanning electron microscopy (SEM) procedures were exploited to study about the surface morphology of medium carbon steel material. Using the experimental data, the artificial neural network (ANN) model with a back-propagation (BP) algorithm was proposed to predict the hot deformation behavior of medium carbon steel material. For model training and testing purpose, the variables such as deformation temperature, strain rate, and strain data were considered as inputs and the flow stress data were used as targets. Before running the neural network, the test data were normalized to effectively run the problem and after solving the problem, the obtained results were again converted in order to achieve the actual data. According to the predicted results, the coefficient of determination ( R 2 ) and the average absolute relative error between the predicted flow stress and the experimental data were determined as 0.999 and 1.335%, respectively. For improving the model predictability, the constrained nonlinear function based optimization procedures was adopted to obtain the best candidate selections of weights and biases. By evaluating each test conditions, it was found that the average absolute relative error based on the optimized ANN-BP model varied from 0.728% to 1.775%. Overall, the trained ANN-BP models proved to be much more efficient and accurate by means of flow stress prediction against the experimental data for all the tested conditions. These optimized results displayed that an ANN-BP model is more accurate for flow stress prediction than that of the conventional flow stress models.

Prediction of creep curve of HP40Nb steel using artificial neural network

Ultra-low Cycle Fatigue Life Prediction of Stainless Steel Based on Transfer Learning Guided Artificial Neural Network

Creep strain prediction in power plant material via ANN modelling of nonlinear ultrasonic test results

Creep Fracture Life Prediction of 9%Cr Heat‐Resistant Steel Based on the Back‐Propagation Artificial Neural Network Considering Microstructure Characteristics

Prediction of nanoindentation creep behavior of tungsten-containing high entropy alloys using artificial neural network trained with Levenberg-Marquardt algorithm

Experimental Investigation and Modeling of Creep Curve of Zr–2.5Nb Alloy by Machine Learning Techniques

Artificial neural network approach for prediction of stress–strain curve of near β titanium alloy

Machine Learning-Assisted Probabilistic Creep Life Assessment for High-Temperature Superheater Outlet Header Considering Material Uncertainty

Prediction of creep behavior of Zr-Nb alloy under dual-phase condition using data driven models

Creep Behaviours of Cr25Ni35Nb and Cr35Ni45Nb Alloys Predicted by Modified Theta Method

A physics‐informed neural network for creep life prediction of austenitic stainless steels in air and liquid sodium

Hybrid Machine Learning Optimization Approach to Predict Hot Deformation Behavior of Medium Carbon Steel Material

A physics-based life prediction model of HP40Nb heat-resistant alloy in a coupled creep-carburisation environment

Towards an Optimized Artificial Neural Network for Predicting Flow Stress of In718 Alloys at High Temperatures

Prediction of high-temperature creep in concrete using supervised machine learning algorithms

The Use of ANN to Predict the Hot Deformation Behavior of AA7075 at Low Strain Rates

Application of Artificial Neural Network to Predict the Crystallite Size and Lattice Strain of CoCrFeMnNi High Entropy Alloy Prepared by Powder Metallurgy

Dynamic Behavior and Modified Artificial Neural Network Model for Predicting Flow Stress During Hot Deformation of Alloy 925

Prediction of fatigue crack growth under variable amplitude loading by artificial neural network-based Lagrange interpolation

Application of soft constrained machine learning algorithms for creep rupture prediction of an austenitic heat resistant steel Sanicro 25

Prediction of True Stress at Hot Deformation of High Manganese Steel by Artificial Neural Network Modeling