Abstract:Purpose This study aimed to solve the engineering problem of free vibration disturbance and local mesh refinement induced by microcrack damage in circularly curved beams. The accurate identification of the crack damage depth, number and location depends on high-precision frequency and vibration mode solutions; therefore, it is critical to obtain these reliable solutions. The high-precision finite element method for the free vibration of cracked beams needs to be developed to grasp and control error information in the conventional solutions and the non-uniform mesh generation near the cracks. Moreover, the influence of multi-crack damage on the natural frequency and vibration mode of a circularly curved beam needs to be detected. Design/methodology/approach A scheme for cross-sectional damage defects in a circularly curved beam was established to simulate the depth, location and the number of multiple cracks by implementing cross-section reduction induced by microcrack damage. In addition, the h-version finite element mesh adaptive analysis method of the Timoshenko beam was developed. The superconvergent solution of the vibration mode of the cracked curved beam was obtained using the superconvergent patch recovery displacement method to determine the finite element solution. The superconvergent solution of the frequency was obtained by computing the Rayleigh quotient. The superconvergent solution of the eigenfunction was used to estimate the error of the finite element solution in the energy norm. The mesh was then subdivided to generate an improved mesh based on the error. Accordingly, the final optimised meshes and high-precision solution of natural frequency and mode shape satisfying the preset error tolerance can be obtained. Lastly, the disturbance behaviour of multi-crack damage on the vibration mode of a circularly curved beam was also studied. Findings Numerical results of the free vibration and damage disturbance of cracked curved beams with cracks were obtained. The influences of crack damage depth, crack damage number and crack damage distribution on the natural frequency and mode of vibration of a circularly curved beam were quantitatively analysed. Numerical examples indicate that the vibration mode and frequency of the beam would be disturbed in the region close to the crack damage, and a greater crack depth translates to a larger frequency change. For multi-crack beams, the number and distribution of cracks also affect the vibration mode and natural frequency. The adaptive method can use a relatively dense mesh near the crack to adapt to the change in the vibration mode near the crack, thus verifying the efficacy, accuracy and reliability of the method. Originality/value The proposed combination of methodologies provides an extremely robust approach for free vibration of beams with cracks. The non-uniform mesh refinement in the adaptive method can adapt to changes in the vibration mode caused by crack damage. Moreover, the proposed method can adaptively divide a relatively fine mesh at the crack, which is applied to investigating free vibration under various curved beam angles and crack damage distribution conditions. The proposed method can be extended to crack damage detection of 2D plate and shell structures and three-dimensional structures with cracks.

Effect of cracks on nonlinear flexural vibration of rotating Timoshenko functionally graded material beam having large amplitude motion

Study on Fatigue Degradation Behavior of a Cracked Rotor Subjected to Lateral Vibration

Flexural Vibration of Rotating Cracked Timoshenko Beam

Stiffness and dynamical behavior of Jeffcottrotor with cross crack

An Analytical Method for Free Vibration Analysis of Functionally Graded Beams with Edge Cracks

Geometrically non-linear forced vibrations of fully clamped functionally graded beams with multi-cracks resting on intermediate simple supports

Vibration Characteristics of Cracked Rotating Beams Using Higher Order Finite Element Technique

Nonlinear Vibration of Edged Cracked FGM Beams Using Differential Quadrature Method

Analysis of Natural Vibration Characteristics of Modified Timoshenko Cracked Beam

Linear free flexural vibration of cracked functionally graded plates in thermal environment

Parametric study on free vibration and instability of a functionally graded cracked shaft in a rotor-disc-bearing system: finite element approach

Bending of Timoshenko beam with effect of crack gap based on equivalent spring model

Free Vibration Analysis Of A Cracked Functionally Graded Beam

Vibrational power flow analysis of Timoshenko microbeams with a crack

Free Vibration of Axially Loaded Functionally Graded Porous Cracked Beams

Buckling of Functionally Graded Euler - Bernoulli and Timoshenko Beams with Edge Cracks

Dynamic Analysis of Coupled Axial-Bending Wave Propagation in a Cracked Timoshenko Beam Using Spectral Finite-Element Method

Dynamic analysis of multiple cracked Timoshenko beam under moving load–analytical method

Dynamic analysis of double cracked bi-directional functionally graded nanobeam using the differential quadrature method

Vibratory characteristics of cracked non-uniform beams with different boundary conditions

Free vibration disturbance and local mesh refinement induced by microcrack damage in circularly curved beams