Abstract:With the continuous improvement in oilfield development and the application of tertiary oil recovery technology, the water content of oilfield-produced fluids has gradually increased, and a large number of oilfield sewage with complex components has also been produced after oil-water separation, and effective treatment is urgently needed. ASP flooding sewage contains alkali, various surfactants, polymers, microemulsion oil droplets, and solid impurities, which are difficult to be effectively treated by traditional water treatment agents and methods. In this study, aminopropyl triethoxysilane (APTES) was used to modify the nano-Fe3O4 coated with tetraethyl silicate (TEOS). The product was used as the ferromagnetic nano-core for the iterative reaction of Michael addition and ester amidation to synthesize a magnetic hyperbranched polyamide amine, and its performance in the treatment of ASP flooding wastewater was evaluated experimentally. For the preparation of APTES-modified Fe3O4@SiO2 (FOSN) product, TEOS was coated over Fe3O4 in an ethanol aqueous solution environment and then APTES was added dropwise. The first-generation branched product (1-FSMN) was obtained by the reaction of FOSN and methyl acrylate graft product (FOSN-M) with ethylenediamine, and the highest yield was 93.7%. The highest yield of the second-generation branched product (2-FSMN) was 91.6%. In this study, a composite flooding wastewater sample from a block in the Bohai oilfield was taken. The suspended solids content was 143 mg/L, the oil content was 921.09 mg/L, the turbidity was 135 NTU, and the zeta potential was -47 mV. The third-generation hyperbranched polymer (3-FSMN) and its quaternary ammonium salt (3-FSMN-Q) performed best in the appropriate dosage range, with the highest oil removal rate of 97%, suspended solid removal rate of 90.3%, turbidity reduction rate of 86.6% and zeta potential reduction rate of 88%. For 3-FSMN and its quaternary ammonium salt, the gravity/magnetic PAC compound treatment experiment was carried out. In the settlement time of only 5 min, 3-FSMN/PAC and 3-FSMN-Q/PAC can achieve the maximum oil removal rate of 87.1% and suspended solids removal rate of 87.3% for polymer containing wastewater from ASP flooding, and 86.3 and 86.0% for 120 mg/L. Its treatment capacity was much better than that of common treatment agent combination (CPAM/PAC).

Preparation and characterization of porous acrylate terpolymer nanocomposite for removal of diesel oil from artificial seawater

Polydopamine-CaCO3 Modified Superhydrophilic Nanocomposite Membrane Used for Highly Efficient Separation of Oil-in-water Emulsions

Facile Preparation of Poly(melamine Formaldehyde) Sponge/bacterial Nanocellulose Composite for Oil-Water Separation

Magnetically recoverable poly (methyl methacrylate-acrylic acid)/iron oxide magnetic composites nanomaterials with hydrophilic wettability for efficient oil-water separation

Tenebrio molitor Larvae-Based Magnetic Polyurea Employed as Crude Oil Spill Removal Tool

Magnetite-silica core–shell grafted myristic acid nanocomposites for oil adsorption from petroleum wastewater

Efficient Oil-Water Separation with Amphipathic Magnetic Nanoparticles of Fe3O4@TiO2

Oil removal from water oil emulsions using magnetic nanocomposite fibrous mats

Fe 3 O 4 /PS magnetic nanoparticles: Synthesis, characterization and their application as sorbents of oil from waste water

Advanced magnetic nanospheres for oil pollutant management: Dual roles in emulsification and demulsification

Green polyurethane synthesis by emulsion technique: a magnetic composite for oil spill removal

Fluorinated polyether grafted TiO2 magnetic composite material for oil-water separation of crude oil emulsion

Fast demulsification of oil-water emulsions at room temperature by functionalized magnetic nanoparticles

Hydrophobic poly(ethylene- co -vinyl acetate) and nanoclay-based polymeric adsorbent for effective removal of oils and various organic solvents from contaminated wastewater

Magnetic Hyperbranched Molecular Materials for Treatment of Oily Sewage Containing Polymer in Oilfield Compound Flooding

A self-cleaning polyacrylonitrile fiber membrane modified by photocatalytic nanoparticles and zwitterionic polymer brush for oil/water separation

Acrylic acid-grafted pre-plasma nanofibers for efficient removal of oil pollution from aquatic environment

Exploring the Potential of Recycled Polyethylene Terephthalate—Lignocellulose/Carbon Nanotube–Graphene Nanosheets an Efficient Extractor for Oil Spill

Nano-modification of carboxylated polyether for enhanced room temperature demulsification of oil-water emulsions: Synthesis, performance and mechanisms

Synthesis and characterization of hydrophobically associating cationic polyacrylamide

Preparation of superhydrophilic poly(acrylonitrile/acrylic acid) electrospun membrane and its application in oil/water separation