Abstract:Crop 3D modeling allows site-specific management at different crop stages. In recent years, light detection and ranging (LiDAR) sensors have been widely used for gathering information about plant architecture to extract biophysical parameters for decision-making programs. The study reconstructed vineyard crops using light detection and ranging (LiDAR) technology. Its accuracy and performance were assessed for vineyard crop characterization using distance measurements, aiming to obtain a 3D reconstruction. A LiDAR sensor was installed on-board a mobile platform equipped with an RTK-GNSS receiver for crop 2D scanning. The LiDAR system consisted of a 2D time-of-flight sensor, a gimbal connecting the device to the structure, and an RTK-GPS to record the sensor data position. The LiDAR sensor was facing downwards installed on-board an electric platform. It scans in planes perpendicular to the travel direction. Measurements of distance between the LiDAR and the vineyards had a high spatial resolution, providing high-density 3D point clouds. The 3D point cloud was obtained containing all the points where the laser beam impacted. The fusion of LiDAR impacts and the positions of each associated to the RTK-GPS allowed the creation of the 3D structure. Although point clouds were already filtered, discarding points out of the study area, the branch volume cannot be directly calculated, since it turns into a 3D solid cluster that encloses a volume. To obtain the 3D object surface, and therefore to be able to calculate the volume enclosed by this surface, a suitable alpha shape was generated as an outline that envelops the outer points of the point cloud. The 3D scenes were obtained during the winter season when only branches were present and defoliated. The models were used to extract information related to height and branch volume. These models might be used for automatic pruning or relating this parameter to evaluate the future yield at each location. The 3D map was correlated with ground truth, which was manually determined, pruning the remaining weight. The number of scans by LiDAR influenced the relationship with the actual biomass measurements and had a significant effect on the treatments. A positive linear fit was obtained for the comparison between actual dry biomass and LiDAR volume. The influence of individual treatments was of low significance. The results showed strong correlations with actual values of biomass and volume with R2 = 0.75, and when comparing LiDAR scans with weight, the R2 rose up to 0.85. The obtained values show that this LiDAR technique is also valid for branch reconstruction with great advantages over other types of non-contact ranging sensors, regarding a high sampling resolution and high sampling rates. Even narrow branches were properly detected, which demonstrates the accuracy of the system working on difficult scenarios such as defoliated crops.

High-precision 3D detection and reconstruction of grapes from laser range data for efficient phenotyping based on supervised learning

High-Precision Phenotyping of Grape Bunch Architecture Using Fast 3D Sensor and Automation

Towards Automated Large-Scale 3D Phenotyping of Vineyards under Field Conditions

Combination of an Automated 3D Field Phenotyping Workflow and Predictive Modelling for High-Throughput and Non-Invasive Phenotyping of Grape Bunches

Detection of Single Grapevine Berries in Images Using Fully Convolutional Neural Networks

An Adaptive Approach for Automated Grapevine Phenotyping using VGG-based Convolutional Neural Networks

Automated Image Analysis Framework for the High-Throughput Determination of Grapevine Berry Sizes Using Conditional Random Fields

Object detection and tracking on UAV RGB videos for early extraction of grape phenotypic traits

UAV-based individual plant detection and geometric parameter extraction in vineyards

A lightweight and efficient model for grape bunch detection and biophysical anomaly assessment in complex environments based on YOLOv8s

Efficient identification, localization and quantification of grapevine inflorescences in unprepared field images using Fully Convolutional Networks

In-field high throughput grapevine phenotyping with a consumer-grade depth camera

Grape Bunch Detection at Different Growth Stages Using Deep Learning Quantized Models

Counting of Grapevine Berries in Images via Semantic Segmentation using Convolutional Neural Networks

Accuracy analysis of a multi-view stereo approach for phenotyping of tomato plants at the organ level

End-to-end deep learning for directly estimating grape yield from ground-based imagery

Grape Berry Detection and Size Measurement Based on Edge Image Processing and Geometric Morphology

NeRF-based 3D reconstruction pipeline for acquisition and analysis of tomato crop morphology

A vision methodology for harvesting robot to detect cutting points on peduncles of double overlapping grape clusters in a vineyard

On-Ground Vineyard Reconstruction Using a LiDAR-Based Automated System

Evaluation of Vineyard Cropping Systems Using On-Board RGB-Depth Perception