Abstract:Permanent deformation is a long-term irrecoverable depression accumulated in the wheel path when the flexible pavement is subjected to heavy loads at high temperature, which can be simulated using the vertically loaded wheel test (VLWT) in the laboratory. The objective of this study is to develop a new approach to analyze the vertically loaded wheel test results based on the elastic-viscoelastic correspondence principle. The energy-based pseudo variables are proposed to perform rutting evaluation of asphalt mixtures in the VLWT.Four types of styrene-butadienestyrene modified asphalt mixtures were prepared to conduct the undamaged compressive dynamic modulus test at different temperatures. Then the master curves of dynamic modulus for these mixtures were converted to get the relaxation modulus. The innovative VLWT for four types of two-layer structure with different asphalt mixture combinations were performed to investigate the rutting development. After that, a new mechanical-empirical rutting prediction model was introduced to predict the rutting development for each layer in the two-layer structure. The energy-based pseudo variables including pseudo strain, pseudo strain rate and dissipated pseudo strain energy (DPSE) were introduced to correlate with the rutting resistance.The results show that the developed mechanical-empirical rutting prediction model is proficient in capturing the rutting development of a two-layer structure of asphalt mixtures measured by a vertically loaded wheel tester. The rutting contributions of the top and bottom layers can be separated using this model. Compared with the total strain, the pseudo strain which removes the viscoelastic effect, is more accurate to evaluate the permanent deformation in a cyclic loading condition. The DPSE increases with the increase of loading cycles and rut depth. Two typical stages with an inflection point can be observed from the test results which indicate that the faster to reach the inflection point, the better rutting performance will be achieved.

On the Viscoelastic Parameters of Gussasphalt Mixture Based on Modified Burgers Model: Deviation and Experimental Verification

Study on Relaxation Damage Properties of High Viscosity Asphalt Sand under Uniaxial Compression

Study of the Viscoelasticity for Fibrous High ViscoelasticAsphalt Sand

Research of Method for Solving Relaxation Modulus Based on Three-Point Bending Creep Test

Nonlinear Viscoelasticity and Viscoplasticity Characteristics of Virgin and Modified Asphalt Binders

Nonlinear Constitutive Model of High-Temperature Viscoelastic Deformation of Gussasphalt Concrete

Energy-Based Kinetics Approach for Coupled Viscoplasticity and Viscofracture of Asphalt Mixtures

Structural Mechanics Analysis of Asphalt Pavement Using Large Stone Asphalt Mixture As Base

Visco-elastoplastic response of flexible pavement under traffic loads

A New Short-Term Aging Model for Asphalt Binders Based on Rheological Activation Energy

Evaluation of Complex Poisson’s Ratio of Aged Asphalt Field Cores Using Direct Tension Test and Finite Element Simulation

Micromechanical Discrete Element Modeling of Asphalt Mixture Shear Fatigue Performance

Micromechanics Modeling of Viscoelastic Asphalt-Filler Composite System with and Without Fatigue Cracks

Evaluation of Rutting Potential of Flexible Pavement Structures Using Energy-Based Pseudo Variables

Implementation of Pseudo J-Integral Based Paris' Law for Fatigue Cracking in Asphalt Mixtures and Pavements

Characterization of the nonlinear viscoelastic constitutive model of asphalt mixture

Viscoelastic Fracture Analysis of Asphalt Concrete Pavement with Cracks

Viscoelastic Damage Characteristics of Asphalt Mixtures Using Fractional Rheology

Dynamic Response of Viscoelastic Asphalt Pavement under Non-uniform Moving Load

A Nonlinear Fractional Viscoelastic-Plastic Creep Model of Asphalt Mixture

Fractional viscoelastic constitutive modelling of real-time strain response for asphalt pavement composites subjected to simulating wheel loadings