Abstract:Interferometric synthetic aperture radar (InSAR) technology can obtain one-dimensional surface displacements in the radar line of sight (LOS). In the field of mining subsidence, large 3D movements often occur at the same time, and hence InSAR derived one-dimensional LOS displacements can hardly reflect the actual surface motion in mining areas. To realize the monitoring of three-dimensional large surface displacements in mining areas, a method for monitoring three-dimensional large surface displacements in mining areas that combines SAR pixel offset tracking (OT) and an improved mining subsidence model is proposed in this article. First, a new functional relationship between surface subsidence and horizontal movement combined with the characteristics of the overburden rock stress and the deformation characteristics of the fractured rock mass in coal mining areas is established. Then, a three-dimensional surface deformation model is established based on the proposed relationship between surface subsidence and horizontal movement and the radar projection equation, and finally, the optimal parameters of the deformation model are inverted iteratively using LOS deformation results obtained by OT method to retrieve the three-dimensional large displacements of the surface. The significant advantage of the method proposed in this article is that it can accurately acquire the 3D large surface displacements using only two SAR amplitude images with the same imaging geometry. To verify the accuracy and reliability of the proposed algorithm, two scenes of high-resolution spotlight TerraSAR-X images are used in this paper to conduct a three-dimensional surface displacement monitoring experiment on a working panel in the Daliuta mining area in Shaanxi Province, China, based on the proposed method. Experimental monitoring results show that the maximum surface subsidence is approximately 4.5 m, and the maximum horizontal movements in the strike and dip directions are approximately 1.4 m and 1.2 m, respectively. Using GPS measurements to verify the monitoring results, the root mean square error (RMSE) of vertical subsidence is 6.8 cm, and the RMSE of horizontal movement is 7.1 cm. Compared with those in the original mining subsidence model, the accuracies of vertical subsidence and horizontal movement in the proposed model are increased by 28.2% and 37.5%, respectively, which proves the reliability and accuracy of the proposed method.

A Geometry Surveying Model and Instrument of a Scraper Conveyor in Unmanned Longwall Mining Faces

Mathematic Model of Simultaneously Measuring Six-dimensional Parameters by Laser

Straightness Measurement Based on FOG-IMU and Shearer Motion Constraints for Longwall Coal Mining

Research on Three-Dimensional Shape Curve Reconstruction Technology for a Scraper Conveyor on an Intelligent Working Face

Research on a Real-Time Monitoring Method for the Three-Dimensional Straightness of a Scraper Conveyor Based on Binocular Vision

An Effective Method for Longwall Automation in Thin Coal Seam.

Reconstruction method of high-precision longwall mining floor curved surface model driven by data points fitting of equipment

The Construction and Application of a Digital Coal Seam for Shearer Autonomous Navigation Cutting

Automated real-time absolute positioning technology on intelligent fully mechanised coal faces using the gyro rts system

Virtual straightening of scraper conveyor based on the position and attitude solution of industrial robot model

Model Design and Application for Excavation Face Stability in Upward Shield Tunneling

Data-Driven Cooperative Control Model of Shearer-Scraper Conveyor Based on Rough Set Theory

Automated Gyro RTS System for Positioning Equipment on Fully Mechanized Coal Faces

Accuracy analysis and efficiency evaluation of 3D laser scanning technology based on SLAM in underground mine roadway measurement

GSMS: A Goaf Scanning and Modeling System for Underground Mines Based on a Quadruped Robot

Pre-Work for the Birth of Driver-Less Scraper (LHD) in the Underground Mine: The Path Tracking Control Based on an LQR Controller and Algorithms Comparison

Acquisition and Assessment of Gear Holistic Deviations Based on Laser Measurement

Constructing a high-precision virtual scene of mining equipment and coal seam roof and floor using actual mining data

Retrieving Three-Dimensional Large Surface Displacements in Coal Mining Areas by Combining SAR Pixel Offset Measurements with an Improved Mining Subsidence Model

Design and Experimental Results of a Three-Dimensional Force Sensor for Shearer Cutting Pick Force Monitoring

A New Method of Monitoring 3D Mining-Induced Deformation in Mountainous Areas Based on Single-Track InSAR