Abstract:Hybrid supercapacitors (HSCs) are novel, promising devices having features of both batteries and supercapacitors. Herein, we report HSCs (Li-HSC and Na-HSC in a uniform system) based on an interlayer-expanded MoS2/rGO composite that show ultrahigh energy density and power density as well as superior cycle stability. The 3D network-structured interlayer-expanded MoS2/rGO nanocomposite (3D-IEMoS2@G) was synthesized and employed as the anode. Because the 3D architecture of the graphene skeleton frame delivered sufficient charges and the highly interlayer-expanded MoS2 achieved fast ion diffusion, the as-prepared composite exhibited excellent performance as the anode material for both LIBs and SIBs (1600 mAh g−1 at 100 mA g−1 for the LIB; 580 mAh g−1 at 100 mAh g−1 and 320 mAh g−1 at a high current density of 10 A g−1). When paired with nitrogen-doped hierarchically porous 3D graphene (N-3DG), the obtained Na-HSC surpassed Li-HSC in a uniform system, showing an excellent performance of 140 Wh kg−1 at 630 W kg−1, 43 Wh kg−1 at an ultrahigh power density of 103 kW kg−1 (charge finished within 1.5 s) and no distinct capacity attenuation after over 10000 cycles. Thus, a quantitative kinetic analysis was performed to understand the synergistic effect of the two electrodes and the resulting effect of ions in the hybrid supercapacitors and to further pave a general path for fabricating high-performance HSCs. An energy storage device that combines the advantages of batteries and capacitors has been developed by researchers in China. Batteries store energy electrochemically as charged ions, while supercapacitors store electrical charge electrostatically on a surface. This gives supercapacitors the advantage that they can be charged very quickly, and charged and discharged many times, but they can’t store as much energy as a battery of the same weight. Zheng-Hong Huang from Tsinghua University in Beijing and co-workers created a hybrid device that exhibited both ultra-high energy and power density along with excellent cycle stability. Their structure had an anode made from a composite of interlayer-expanded molybdenum disulfide and graphene oxide. The three-dimensional graphene skeleton supported the electrical charge, while the interlayer-expanded molybdenum disulfide enabled rapid diffusion of ions and provided sufficient energy storage sites. Sodium ion hybrid capacitors is fabricated by interlayer-expanded MoS2/rGO composite and it shows greater performance than lithium ion capacitor.

Pushing the Energy Output and Cyclability of Sodium Hybrid Capacitors at High Power to New Limits

A High Energy and Power Sodium-Ion Hybrid Capacitor Based on Nitrogen-Doped Hollow Carbon Nanowires Anode

Confined Seeds Derived Sodium Titanate/graphene Composite with Synergistic Storage Ability Toward High Performance Sodium Ion Capacitors

All‐Cellulose‐Based Quasi‐Solid‐State Sodium‐Ion Hybrid Capacitors Enabled by Structural Hierarchy

Enhancing Specific Energy in Sodium-Ion Hybrid Capacitors via Quasi-Anodeless Configuration

Adapting a Kinetics-Enhanced Carbon Nanostructure to Li/Na Hybrid Water-in-Salt Electrolyte for High-Energy Aqueous Supercapacitors

High-performance Sodium-Ion Hybrid Capacitors Based on an Interlayer-Expanded MoS2/rGO Composite: Surpassing the Performance of Lithium-Ion Capacitors in a Uniform System

Carbon Coated MoS2 Nanosheets Vertically Grown on Carbon Cloth As Efficient Anode for High-Performance Sodium Ion Hybrid Capacitors

Enhanced Cathode and Anode Compatibility for Boosting Both Energy and Power Densities of Na/K-Ion Hybrid Capacitors

Biomass-Derived Hard Carbon and Nitrogen-Sulfur Co-Doped Graphene for High-Performance Symmetric Sodium Ion Capacitor Devices

Coupled and decoupled hierarchical carbon nanomaterials toward high-energy-density quasi-solid-state Na-Ion hybrid energy storage devices

Kinetically well-matched porous framework dual carbon electrodes for high-performance sodium-ion hybrid capacitors

Electrospun Na3V2(PO4)3/carbon composite nanofibers as binder-free cathodes for advanced sodium-ion hybrid capacitors

Engineering Electronic Transfer Dynamics and Ion Adsorption Capability in Dual-Doped Carbon for High-Energy Potassium Ion Hybrid Capacitors

Ti2Nb2O9/graphene hybrid anode with superior rate capability for high-energy-density sodium-ion capacitors

3D Porous Oxygen-Doped and Nitrogen-Doped Graphitic Carbons Derived from Metal Azolate Frameworks as Cathode and Anode Materials for High-Performance Dual-Carbon Sodium-Ion Hybrid Capacitors

High Energy Density Hybrid Lithium-Ion Capacitor Enabled by Co3ZnC@N-doped Carbon Nanopolyhedra Anode and Microporous Carbon Cathode

High Performance Hybrid Supercapacitor Based on Graphene-Supported Ni(OH)2-Nanowires and Ordered Mesoporous Carbon CMK-5

Pseudocapacitive Sodium Storage in Mesoporous Single-Crystal-Like Tio2-Graphene Nanocomposite Enables High-Performance Sodium-Ion Capacitors

High-performance Zn-ion hybrid supercapacitor enabled by the hierarchical N/S co-doped graphene/polyaniline cathode

Graphene wrapped TiO2@MoSe2 nano-microspheres with sandwich structure for high-performance sodium-ion hybrid capacitor