Abstract:Self-compacted concrete (SCC) is a special type of concrete; it is a liquid mixture appropriate for structural elements with excessive reinforcement without vibration. SCC is commonly produced by increasing the paste volume and cement content. As cement production is one of the huge factors in releasing CO2 gas into the atmosphere, by-product materials such as fly ash are utilized as a cement replacement in concrete. In addition to the positive environmental impact, fly ash can maintain an excellent fresh and mechanical property. Incorporating fly ash into self-compacted concrete is widely applied in practice. However, its application is frequently limited by a lack of knowledge about the mixed material gained from laboratory tests. The most significant mechanical property for all concrete types is compressive strength (CS); also, the slump flow diameter (SL) in the fresh state is a crucial property for SCC. Hence, developing an accurate and reliable model for predicting the CS and SL is very important for saving time and energy, as well as lowering the cost. This research study proposed a projection of both the CS and SL of SCC modified with fly ash by three different model approaches: Nonlinear regression (NLR), Multi-Linear regression (MLR), and Artificial Neural Networks (ANN). In this regard, two different datasets were collected and analyzed for developing models: 308 data samples were used for predicting the CS, and 86 data samples for the SL. Each database included the same five independent parameters. The ranges for CS prediction were: cement (134.7–583 kg/m3), water-to-binder ratio (0.27–0.9), fly ash (0–525 kg/m3), sand (478–1180 kg/m3), coarse aggregate (578–1125 kg/m3), and superplasticizer (0–1.4%). The dependent parameter (CS) ranged from 9.7 to 81.3 MPa. On the other hand, the data ranges for the SL prediction included independent parameters such as cement (83–733 kg/m3), water-to-binder ratio (0.26–0.58), fly ash (0–468 kg/m3), sand (624–1038 kg/m3), coarse aggregate (590–966 kg/m3), and superplasticizer (0.087–21.84%). Also, the dependent parameter (SL) ranged from 615 to 800 m. Various statistical assessment tools, such as the coefficient of determination (R2), Root Mean Squared Error (RMSE), Mean Absolute Error (MAE), Objective value (OBJ), and Scatter Index (SI), were used to evaluate the performance of the developed models. The results showed that the ANN model best predicted the CS and SL of SCC mixtures modified with fly ash. Furthermore, the sensitivity analysis demonstrated that the cement content is the most effective factor in predicting the CS and SL of SCC mixtures.

Predicting fly ash dosages to prevent ASR by introducing the concrete prism test (CPT) chemical index model

A Modified Chemical Index to Predict Fly Ash Dosage for Mitigating Alkali-Silica Reaction

Shrinkage and Creep of Sustainable Self-Compacting Concrete with Recycled Concrete Aggregates, Fly Ash, Slag, and Silica Fume

Development of a Screening Tool for Rapid Fly Ash Evaluation for Mitigating Alkali Silica Reaction in Concrete

Utilizing Artificial Intelligence to Predict the Superplasticizer Demand of Self-Consolidating Concrete Incorporating Pumice, Slag, and Fly Ash Powders

An Artificial Intelligence Model for Computing Optimum Fly Ash Content for Structural-Grade Concrete

Application of Modified ASTM C1260 Test for Fly Ash-Cement Mixtures

Predicting the chloride diffusion in concrete incorporating fly ash by a multi-scale model

The Influence and Application of Slag, Fly Ash, and Limestone Flour on Compressive Strength of Concrete Based on the Concrete Compressive Strength Development over Time (CCSDOT) Model

Expansion and Mitigation of Alkali-Silica Reaction in Binary Blended Concrete Confining Potentially Reactive Aggregates

Development of Enhanced Test Methods to Evaluate Alkalisilica Reaction in Concrete

Soft Computing and Machine Learning-Based Models to Predict the Slump and Compressive Strength of Self-Compacted Concrete Modified with Fly Ash

AI Mix Design of Fly Ash Admixed Concrete Based on Mechanical and Environmental Impact Considerations

Pozzolanic Reactivity of High-Alkali Supplementary Cementitious Materials and Its Impact on Mitigation of Alkali-Silica Reaction

RETRACTED: Experimental Method and Prediction Model for Autogenous Shrinkage of High Performance Concrete

Divergence between Performance in the Field and Laboratory Test Results for Alkali-Silica Reaction

A numerical study on chloride transport in alkali-activated fly ash/slag concretes

Experimental Investigation and Numerical Model for Chloride Diffusivity of Long-Age Fly Ash Cement Slurry

Modeling of Effect of Fly Ash Amount on Microstructure and Chloride Diffusivity of Blended Fly Ash-Cement Systems

Artificial neural network modeling for the effect of fly ash fineness on compressive strength

Influence of Fly Ash Dosage and Desert Sand Replacement Ratio (DSRR) on the Carbonation Resistance of Concrete