Reaction of a Molten Cr-Si-Base Alloy with Ceramics and a High Entropy Oxide
Lucas Pelchen,Manuel Schenker,Maren Lepple,Anke Silvia Ulrich
DOI: https://doi.org/10.1007/s11085-024-10285-4
2024-08-09
High Temperature Corrosion of Materials
Abstract:Due to their higher thermal and chemical stability than other high-temperature materials, chromium-silicon-base (Cr-Si-base) alloys are promising materials for future gas turbines and other high-temperature applications operating under harsh conditions. To enable near-net-shape casting of Cr-Si-base alloys, a compatibility of the alloy melt with the ceramic crucibles and molds is necessary. Additionally, a metal-ceramic contact exists at the interface between thermal barrier coating (TBC) and alloy, where metallic may melts play a role in the case of coating failure and overheating. In this study, molten Cr 92 Si 8 (in at. %) alloy is brought into contact with powders of ceramics commonly used for casting molds or crucibles (e.g. ZrSiO 4 , Al 2 O 3 , 3YSZ), to investigate liquid metal corrosion, interdiffusion, and stabilities. Additionally, the high entropy oxide (Sm 0.2 Gd 0.2 Dy 0.2 Er 0.2 Yb 0.2 ) 2 Zr 2 O 7 (HEO), a potential future TBC material, is investigated. Before melting using an electric arc furnace, the powders of the investigated ceramics were mixed with pulverized Cr 92 Si 8 and pressed into alloy-ceramic pairs, to maximize the contact area between molten metal and ceramic. For microstructural investigations and phase analysis, the materials were assessed using scanning electron microscopy (SEM) equipped with energy-dispersive X-ray spectroscopy (EDS), and X-ray diffraction (XRD). The widely used mold material ZrSiO 4 and the coating BN were found to decompose, while reaction products of SiO 2 and CoAl 2 O 4 with the melt were detected. Al 2 O 3 , 3YSZ, and the HEO did not show decomposition or corrosion by the melt. Al 2 O 3 , 3YSZ, and the HEO are therefore considered as promising crucible, mold, and TBC materials for Cr-Si-base alloys.