Abstract:Summary Production data are essential for designing and operating electrical submersible pump (ESP) systems. This study aims to develop artificial neural network (ANN) models to predict flow rates of ESP artificially lifted wells. The ANN models were developed using 31,652 data points randomly split into 80% (25,744 data points) for training and 20% (5,625 data points) for testing. Each data set included measurements for wellhead parameters, fluid properties, ESP downhole sensor measurements, and variable speed drive (VSD) sensors parameters. The models consisted of four separate neural networks to predict oil, water, gas, and liquid flow rates. Sensitivity analyses were performed to determine the optimum number of input parameters that can be used in the model. The best performance was achieved with ANN models of 16 input parameters that are readily available in ESP wells. The results of the best ANN configuration indicate that the mean absolute percent error (MAPE) between the predicted flow rates and the actual measurements for the testing data points of the oil, water, gas, and liquid networks is 3.7, 5.2, 6.4, and 4.1%, respectively. In addition, the correlation coefficients (R2) are 0.991, 0.992, 0.983, and 0.979 for the estimated oil, water, gas, and liquid flow rates for the testing data points, respectively. The performance of the ANN models was compared against performance of published physics-based models and the results were comparable. Unlike the physics-based methods, the ANN models have the advantage that they do not require periodic calibration. The ANN models were used to predict the flow rate curves of an oilwell in the Western Desert of Egypt. The results were compared to the actual separator test data. It was clear that the model results matched the actual test data. The ANN model is useful for predicting individual well production rates within wide variety of pumping conditions and completion configurations. This should allow for continuous monitoring, optimization, and performance analysis of ESP wells as well as quicker response to operational issues. In comparison to traditional separators and multiphase flowmeters (MPFMs), the use of the developed ANN models is simple, quick, and inexpensive.

On the Parametric Study of Lubricating Oil Production using an Artificial Neural Network (ANN) Approach

Direct Prediction of Steam Cracking Products from Naphtha Bulk Properties: Application of the Two Sub-Networks ANN

Product Distributions of Benzene Alkylation with Propylene Estimation Using Artificial Neural Network (ANN)

CFD and Neural Network-Based Predicting for Oil Delivery Performance of Oil Pump in Engines

Investigating the viscosity of hybrid nano-lubricant containing MWCNTs with ANN modeling to introduce the best and most optimal lubricant

Artificial Neural Network Modeling in the Presence of Uncertainty for Predicting Hydrogenation Degree in Continuous Nitrile Butadiene Rubber Processing

Machine Learning Composite-Nanoparticle-Enriched Lubricant Oil Development for Improved Frictional Performance—An Experiment

Optimization of Operational Parameters Using Artificial Neural Network and Support Vector Machine for Bio-oil Extracted from Rice Husk

Modeling equilibrium and non-equilibrium thermophysical properties of liquid lubricants using semi-empirical approaches and neural network

Application of Tribological Artificial Neural Networks in Machine Elements

A New Model for Predicting Surface Pump Pressure of Drilling Rig Using Artificial Neural Network

Application of the Neural Decision Tree approach for prediction of petroleum production

Prediction of ball-on-plate friction and wear by ANN with data-driven optimization

Data-Driven Proxy Model for Forecasting of Cumulative Oil Production during the Steam-Assisted Gravity Drainage Process

Optimization of the remediation of oil-drilling cuttings by combining artificial neural networks with knowledge-based models

A critical review on the use of artificial neural networks in olive oil production, characterization and authentication

Application of Artificial Neural Networks for Investigation of Pressure Filtration Performance, a Zinc Leaching Filter Cake Moisture Modeling

Artificial Neural Network Model to Predict Production Rate of Electrical Submersible Pump Wells

New Vision into Relative Permeability Estimation Using Artificial Neural Networks

Proposing a modified mechanism for determination of hydrocarbons dynamic viscosity, using artificial neural network

Artificial neural network-based model for quality estimation of refined palm oil