Living and Conducting : Coating Individual Bacteria with Polypyrrole
Rong-Bin Song,YiChao Wu,Zong-Qiong Lin,Jian Xie,Chuan Hao Tan,Joachim Say Chye,Loo,Bin Cao,Jian-Rong Zhang,Jun-Jie Zhu,Qichun Zhang
2019-01-01
Abstract:Coating individual bacteria with conjugated polymers to endow them with more functionalities is highly desirable. In this research, we developed an in-situ polymerization method to successfully coat ploypyrrole on the surface of individual Shewanella oneidensis MR-1, Escherichia coli K-12,Ochrobacterium anthropic N058 or Streptococcus thermophilus LMD-9. These as-coated bacteria displayed enhanced conductivities without affecting viability, therefore suggesting the generality of our coating method. Because of their excellent conductivity, we employed polypyrrole-coated Shewanella oneidensis MR-1 as an anode in microbial fuel cells (MFCs) and found that not only direct contact-based extracellular electron transfer is dramatically enhanced, but the viability of bacterial cells in MFCs also improved. Our results indicate that coating individual bacteria with conjugated polymers could be a promising strategy to enhance their performance or enrich them with more functionalities. The coating of functional materials onto the surfaces of individual living systems not only protects their bioinformation under harsh environments, but is also helpful to increase their stability and performance as well as to introduce more functionalities in bio-related devices, including sensing, bioreactors, and microfluidic devices. Moreover, such coating would provide scientists more fundamental information during the study of cell biology. Inspired by biological preservation mechanism, several protective coatings including metal-organic frameworks (MOF), iron-tannate coordination complex, silica and silica-titania have been demonstrated to extend cellular viability to environmental stresses. In addition, recent studies have already demonstrated that the encapsulation of yeast cells with conducting coatings (e.g., graphene and polydopamine) not only prolongs the cell lifetime but also offers good electrical conductivity. Although such coatings have already exhibited many advantages and introduced additional functionalities to cells, the potential of these surface-modified cells have not been fully exploited in above mentioned researches. Thus, advancing the development of some important research fields like microbial fuel cells (MFCs) by slickly integrating basic functions of biological units with intrinsic properties of surface coatings is essential to inject new vitality into the field of cell-surface modification. MFCs are typical bioelectrochemical systems (BESs) that harness the metabolism of exoelectrogenic bacteria to harvest electricity from organic substrates, and have attracted continuous attention. This is due to their huge potential for simultaneous sustainable energy production and wastewater treatment. Although huge improvements have been achieved in recent years, MFCs are still far from reaching the level of practical application due to their relatively low power density. Generally, the extracellular electron transfer (EET) between exoelectrogens and anodes is keenly considered as a key step to determine the power output of MFCs. In the past, extensive studies have been devoted to tailor the anode for improving the exoelectrogen-anode interactions and thus the EET efficiency. One strategy is to enhance the surface properties of anodes. For example, polyaniline (PANI) and positively-charged ionic liquids have been used as anode modifiers to enhance the contact between anode and bacterial cells due to the electrostatic attraction. 8] A further way is to fabricate novel nanomaterials with sophisticated structures as anodes. As an example, a conductive nanosucker array has been demonstrated to promote the affinitive mechanical contact through the vacuum suction that result from the depletion of oxygen in the inner space of the nanosucker. In these mentioned researches, planktonic bacteria attach onto the anode in a naturally growth manner, which limit bacteria loading to some extent. In view of this, researches on the anodes of MFC have begun to flourish in fabricating electroactive hybrid biofilms, as they possess high bacterial cell density and enhanced EET efficiencies. However, it is inevitable that some of bacterial cells in electroactive hybrid biofilms cannot be directly associated with conductive materials. In this case, the electron propagation between these bacterial cells and anodes is only through adjacent nonconductive bacteria, resulting in a reduction in EET efficiency. Obviously, encapsulation of individual bacterial cells with conductive materials would allow the electron transport more efficiently from inner cell to the electrode. Therefore, employing conductingnanomaterial-coated bacteria should be a promising strategy to resolve the aforementioned problem in such engineering MFCs. [a] R. B. Song, Dr. Z. Q. Lin, J. Xie, Prof. J. S. C. Loo, Prof. Q. Zhang School of Materials Science and Engineering Nanyang Technological University 50 Nanyang Avenue, Singapore 639798 E-mail: JoachimLoo@ntu.edu.sg; qczhang@ntu.edu.sg [b] R. B. Song, Prof. J. R. Zhang, Prof. J.-J. Zhu State Key Laboratory of Analytical Chemistry for Life and Collaborative Innovation Center of Chemistry for Life Sciences, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing 210023, P. R. China E-mail: jrzhang@nju.edu.cn; jjzhu@nju.edu.cn [c] Y. Wu, C. H. Tan, Prof. J. S. C. Loo, Prof. B. Cao Singapore Centre for Environment Life Science Engineering Nanyang Technological University 60 Nanyang Drive, Singapore 637551 E-mail: BinCao@ntu.edu.sg [d] Y. Wu, Prof. B. Cao School of Civil and Environmental Engineering, Nanyang Technological University 50 Nanyang Avenue, Singapore 639798 [e] Prof. J. R. Zhang School of Chemistry and Life Science, Nanjing University Jingling College Nanjing 210089, P. R. China [f] Prof. Q. Zhang Division of Chemistry and Biological Chemistry, School of Physical and Mathematical Sciences, Nanyang Technological Universtiy 50 Nanyang Avenue, Singapore 639798 Supporting information for this article is given via a link at the end of the document.