Abstract:Two key properties of excipients for inclusion in direct compression tablets are flowability and compactibility. Glutinous rice starch (GRS) has poor flowability, which limits its use in direct compression tablets. This study aimed to create a multifunctional direct compression excipient (filler binder disintegrant) with improved flowability from GRS by the co-precipitation method. The physicochemical and pharmaceutical properties of the co-precipitated GRS (cpGRS) were investigated. The optimum conditions for producing cpGRS (0.43 M sodium hydroxide solution, 7.09% PVP K30, 14.02% calcium carbonate, 95 min of mixing time and pH of 6.97) resulted in 68.80% yield, fair to good flowability, acceptable tablet strength, and fast disintegration. The FT-IR spectra of cpGRS showed no significant shifts in the key peaks, which indicates that there was an absence of chemical interactions within cpGRS. X-ray diffractograms also showed no significant changes, indicating that the GRS granules, calcium carbonate, and PVP K30 components remained unaltered during co-precipitation. cpGRS also demonstrated a dilution capacity of 50% when paracetamol was used as model drug. When cpGRS was combined with domperidone or propranolol hydrochloride it showed a better deformation capability than the physical mixtures. Although cpGRS was sensitive to lubricant, the hardness and tensile strength were higher than common strength for general purpose use in tablets. When compared to the physical mixture, pregelatinized starch and directly compressible calcium carbonate, the results showed that cpGRS tablets of both model drugs passed the friability test, demonstrated the best disintegration property, provided the fastest and highest drug release profile for propranolol, and improved the drug release profile for domperidone. For propranolol-cpGRS tablets, dissolution medium at different pH did not affect the dissolution profile. For domperidone-cpGRS tablets, the pH of dissolution medium did affect the dissolution profile of the tablets. This was according to the API solubility. These results reveal that cpGRS is an excellent multifunctional i.e., filler, binder, and disintegrant excipient suitable for direct compression tablets. The main component is natural. The preparation method is simple, quick, and efficient. This method does not produce harmful waste and requires only basic equipment, and affordable reactants and devices.

Mannitol-coated hydroxypropyl methylcellulose as an alternative directly compressible controlled release excipient

Mannitol-Coated Hydroxypropyl Methylcellulose as a Directly Compressible Controlled Release Excipient for Moisture-Sensitive Drugs: A Stability Perspective

Novel Hot Melt Extruded Matrices of Hydroxypropyl Cellulose and Amorphous Felodipine–Plasticized Hydroxypropyl Methylcellulose As Controlled Release Systems

Controlled Engineering of Highly Aligned Fibrous Dosage Form Matrices for Controlled Release

Development of Multifunctional Directly Compressible Co-processed Orodispersible Excipient Using Spray Drying Technique.

An Update of Moisture Barrier Coating for Drug Delivery

Co-Processed Chitin-Mannitol as a New Excipient for Oro-Dispersible Tablets

Development of a HPMC-based controlled release formulation with hot melt extrusion (HME)

A Novel Lactose/MCC/L-HPC Triple-Based Co-Processed Excipients with Improved Tableting Performance Designed for Metoclopramide Orally Disintegrating Tablets

Optimization of Microcrystalline Cellulose PH 101, Lactose, and Kollidon® K 30 To Obtain Co-Processed Excipient Through Spray Drying

Studies on Sustained Release Hydrophilic Matrix Tablets Containing Hydroxypropylmethylceilulose and Carbopol

Application of co-precipitated glutinous rice starch as a multifunctional excipient in direct compression tablets

Development and Characterization of Multifunctional Directly Compressible Co-processed Excipient by Spray Drying Method

Impact of dry coating lactose as a brittle excipient on multi-component blend processability

Study on Preparation of Konjac Glucomannan- Hydroxypropyl Methyl Cellulose Compression Coated Tablets for Colonic Delivery and in Vitro Release

Drug-Polymers Composite Matrix Tablets: Effect of Hydroxypropyl Methylcellulose (HPMC) K-Series on Porosity, Compatibility, and Release Behavior of the Tablet Containing a BCS Class I Drug

Design and Optimization of a Nanoparticulate Pore Former as a Multifunctional Coating Excipient for pH Transition-Independent Controlled Release of Weakly Basic Drugs for Oral Drug Delivery

Updates on applications of low-viscosity grade Hydroxypropyl methylcellulose in coprocessing for improvement of physical properties of pharmaceutical powders

Compressibility of floating pellets with verapamil hydrochloride coated with dispersion Kollicoat SR 30 D

Synthesis and assessment of CTAB and NPE modified organo-montmorillonite for the fabrication of organo-montmorillonite/alginate based hydrophobic pharmaceutical controlled-release formulation

An oral controlled release system for ambroxol hydrochloride containing a wax and a water insoluble polymer