Abstract:Lithium (Li) metal anodes are critical components for next-generation high-energy density batteries, owing to their high theoretical specific capacity (3800 mAh.g(-1)) and low voltage (-3.040 V versus the standard hydrogen electrode). However, their applications are hindered by dendrite growth, which potentially induces inner short circuit and leads to safety issues. Employing three-dimensional (3D) current collectors is an effective strategy to suppress dendrite growth by decreasing the local current density. However, many of the reported 3D current collectors have a lithiophobic surface, which leads to non-uniform Li+ ion deposition. Thus, a complicated modification process is required to increase the lithiophilic property of the current collectors. In addition, they have a large weight or volume, which greatly lowers the energy density of the entire anode. In this work, we report a lightweight 3D carbon current collector with a lithiophilic surface by employing the direct carbonization of low-cost bacterial cellulose (BC) biomass. The current collector is composed of electrically conductive, robust, and interconnected carbon nanofiber networks, which provide sufficient void space to accommodate a large amount of Li and buffer the volume changes during Li plating and stripping. More importantly, homogeneously distributed oxygen-containing functional groups on the nanofiber surface are retained by controlling the carbonization temperature. These functional groups serve as uniform nucleation sites and help realize uniform and dendrite-free Li deposition. Notably, the areal mass density of the 3D carbon current collector was only 0.32 mg.cm(-2) and its mass ratio in the whole anode was 28.8%, with a capacity of 3 mAh.cm(-2). This 3D carbon current collector facilitates the stable working of the half cells for 150 cycles under a high current density of 3 mA.cm(-2) or a high capacity of 4 mAh.cm(-2). Symmetric cells exhibit a steady cycling life as long as 600 h under a current density of 1 mA.cm(-2) and a capacity of 1 mAh.cm(-2). Moreover, appreciable cycling performance was realized in the full cells when the anodes were paired with LiNi0.8Co0.15Al0.05 cathodes. Furthermore, the low-cost raw materials and the simple preparation method promise significant potential for the future applications of the proposed 3D current collectors.

Highly Reduced Graphene Assembly Film as Current Collector for Lithium Ion Batteries

Roll-to-Roll Scale Fabrication of High-Performance Graphene-Assembled Film Cathode Current Collectors for Lithium-Ion Batteries

Reduced Graphene Oxide Films with Ultrahigh Conductivity As Li-Ion Battery Current Collectors

Composite Graphene‐Modified Aluminum Foil Cathode Current Collectors for Lithium‐ion Battery with Enhanced Mechanical and Electrochemical Performances

Graphene-coated plastic film as current collector for lithium/sulfur batteries

Metal/nanocarbon Layer Current Collectors Enhanced Energy Efficiency in Lithium-Sulfur Batteries

Graphene‐Armored Aluminum Foil with Enhanced Anticorrosion Performance As Current Collectors for Lithium‐Ion Battery

Lithiated Graphene Current Collector for Stable Anode‐Free and Anode‐Less Lithium Metal Batteries

A Rationally Assembled Graphene Nanoribbon/graphene Framework for High Volumetric Energy and Power Density Li-ion Batteries

Reduced-Graphene Oxide/Poly(acrylic Acid) Aerogels As a Three Dimensional Replacement for Metal-Foil Current Collectors in Lithium-Ion Batteries

Carbon Black/graphene-Modified Aluminum Foil Cathode Current Collectors for Lithium Ion Batteries with Enhanced Electrochemical Performances

Vertical Graphenes Grown on a Flexible Graphite Paper as an All-Carbon Current Collector towards Stable Li Deposition

V2O5/Graphene Hybrid Supported on Paper Current Collectors for Flexible Ultrahigh-Capacity Electrodes for Lithium-Ion Batteries.

Engineering Moderately Lithiophilic Paper-Based Current Collectors with Variable Solid Electrolyte Interface Films for Anode-Free Lithium Batteries

Binder-Free, Flexible, and Self-Standing Non-Woven Fabric Anodes Based on Graphene/Si Hybrid Fibers for High-Performance Li-Ion Batteries

Folding Graphene Film Yields High Areal Energy Storage in Lithium-Ion Batteries

Thin Flexible Lithium Ion Battery Featuring Graphite Paper Based Current Collectors with Enhanced Conductivity

High Safety and Lighter Hybrid Current Collector for Libs Cathode

Aligned carbon fibers–carbon nanotube–polymer–based composite as lithium-ion battery current collector

Highly Conductive, Light Weight, Robust, Corrosion‐Resistant, Scalable, All‐Fiber Based Current Collectors for Aqueous Acidic Batteries

Bacterial Cellulose-Derived Three-Dimensional Carbon Current Collectors for Dendrite-Free Lithium Metal Anodes