Abstract:Amorphous alloys exhibit unique physical and mechanical properties, which are closely connected with their microstructural heterogeneity. The correlation between structural heterogeneity and mechanical properties is one of the important issues of amorphous alloys. Micro-alloying is an effective way to tune the mechanical and physical properties of amorphous alloys. In the present study, Zr50–xCu34Ag8Al8Pdx (x = 0 and 2) amorphous alloys with ability to form excellent glass are chosen as model alloys. The evolutions of heat flow and shear modulus in different states (as-cast, relaxed and crystalline) with temperature of Zr50–xCu34Ag8Al8Pdx (x = 0 and 2) glass system are studied by differential scanning calorimetry (DSC) and electromagnetic-acoustic transformation (EMAT) technique, respectively. The experiment demonstrates that a decrease of the shear modulus is accompanied by the endothermic heat flow and vice versa. The correlation between the heat flow and shear modulus is investigated according to the interstitialcy theory. The calculations of the interstitialcy defect concentration and activation energy spectra suggest that the microstructure remains stable at relatively low temperatures. When temperature increases, the interstitialcy defect structure is activated. Compared with that in the as-cast state, the interstitialcy defect concentration in the relaxed state is reduced by structural relaxation, indicating that temperature-dependent shear modulus softening is inhibited. At temperatures above glass transition temperature, a rapid growth of interstitialcy defect concentration results in the accelerated shear softening, which is accompanied by significant endothermic heat flow. It is noted that the minor addition of palladium reduces the interstitialcy defect concentration in the Zr50–xCu34Ag8Al8Pdx (x = 0 and 2) metallic glass systems. It is suggested that the introduction of Pd reduces the atomic mobility and increases the characteristic relaxation time. In parallel, the change of shear modulus as a function of the aging time (below the glass transition temperature) is studied by using EMAT equipment. The results indicate that the interstitialcy defect concentration decreases in the physical aging process, which is accompanied by an increase of shear modulus. The interstitialcy defect concentration and shear modulus change towards the quasi-equilibrium state with aging time increasing. A reduction of the interstitialcy defect concentration leads to a decrease of the shear modulus change upon microalloying by Pd into Zr50–x Cu34Ag8Al8Pdx (x = 0 and 2) metallic glass system.

Structural Causes of Brittleness Changes in Aluminosilicate Glasses with Different Cooling Rates

Size-Dependent Brittle-To-Ductile Transition in Silica Glass Nanofibers

Brittleness of metallic glasses dictated by their state at the fragile-to-strong transition temperature

Unexpected Non-Monotonic Changing in the Heterogeneity of Glasses During Annealing

Microstructural Effects on the Dynamical Relaxation of Glasses and Glass Composites: A Molecular Dynamics Study

Unraveling the microstructural heterogeneity and plasticity of Zr<sub>50</sub>Cu<sub>40</sub>Al<sub>10</sub> bulk metallic glass by nanoindentation

DYNAMIC RELAXATION CHARACTERISTICS AND HIGH TEMPERATURE FLOW BEHAVIOR OF ZR-BASED BULK METALLIC GLASS

Evolution of defect concentration in Zr<sub>50–</sub><i><sub>x</sub></i>Cu<sub>34</sub>Ag<sub>8</sub>Al<sub>8</sub>Pd<i><sub>x</sub></i> (<i>x</i> = 0, 2) amorphous alloys derived using shear modulus and calorimetric data

Impact of the Structural State on the Mechanical Properties in a Zr–Co–Al Bulk Metallic Glass

Thermomechanical Coupling in Glassy Polymers: an Effective Temperature Theory

Effect of Chemical Strengthening Residual Stress on the Flexural Performance and Fracture Behavior of Aluminosilicate Glass

Intrinsic and Extrinsic Effects on the Brittle-to-ductile Transition in Metallic Glasses

Brittle to ductile transitions in glasses: Roles of soft defects and loading geometry

Molecular Dynamics Simulations on Fracture Toughness of Al2O3-SiO2 Glass-Ceramics

Understanding the Brittle-Ductile Transition of Glass Polymer on Mesoscopic Scale by In-Situ Small Angle X-ray Scattering

An Experimental Exploration on the Dynamic Compressive Properties of Annealed and Chemically Strengthened Glass

The influence of Engineering strain rates on the atomic structure, crack propagation and cavitation formation in Al based metallic glass

Quasi-static and Low-Velocity Impact Biaxial Flexural Fracture of Aluminosilicate Glass - an Experimental and Numerical Study

The roles of loading rate and temperature during shear-band-to-crack transition (SCT) in bulk metallic glasses: A study of quasi-static and dynamic shearing performances at ambient and cryogenic temperatures

Ductile to brittle transition of fracture of a Zr-based bulk metallic glass: Strain rate effect

The Competing Effect of Initial Crack Depth Versus Chemical Strengthening Parameters on Apparent Fracture Toughness of Sodium Aluminosilicate Glass