Abstract:In recent years, Rotary Detonation Engine (RDE) has attracted more and more attention because of their higher combustion efficiency than conventional aerospace engines. For the key problems, ignition technique is particularly important. In order to establish a steady rotating detonation wave under one single ignition in a combustion chamber, a method based on controlling initial fuel distribution is proposed to start a rotating detonation engine under 0.4 MPa injection total pressure using hydrogen/air mixture as its propellant. Two-dimensional reactive Navier-Stokes equation coupled with the Arrhenius kinetic model and κ-ε model are used to simulate detonation process. Elementary chemical reaction model with 9 species 27 reversible reactions is applied to describe the evolution of reaction components. The finite volume method is conducted, and flux terms are solved by using the monotonic upstream-centered scheme for conservation laws, and the time integration is performed by using Euler method. Grid numbers are 600 (azimuthal direction) ×200 (axial direction), with mesh size of about 0.5 mm. Initial fuel filling rate (ϕ) is used to quantify the initial fuel distribution. The numerical study on the propagation characteristics of rotating detonation wave shows that the initial fuel filling rate is the key to the establishment of rotary detonation wave. This effect is particularly evident when the fuel injection pressure is low, which determines the height of the fuel layer(hf) for the first cycle of detonation wave development. When RDE operating steadily, hf is a function of the mixture sensitivity to detonation. But in initial stage, hf is affected by the fuel distribution and this affection can last more than one period. Once detonation wave or deflagration wave formed, it can either maintain rotating or die down, which is determined by the height of mixture layer ahead of it. Thus, keeping hf in an appropriate range by adjusting the initial fuel filling rate is the key to establish and maintain a rotating detonation wave in initial stage. Also, in this stage DW faces maximum possibility of extinguish. Based on this strategy, a rotating detonation wave is established successfully in combustion chamber with diameter of 95.5 mm and the length of chamber is 100 mm. The computed results give the rotating detonation wave has a velocity of 1 604 m/s and operational frequency is 5347.6 Hz. Furthermore, there are four operation modes of the engine due to different initial fuel filling rate, which are failed initiation of the detonation (0%−13.3%), stable rotating detonation (13.3%−20%), unstable detonation (20%−26.6%) and dying detonation (26.7%−100%). So the critical range of the initial fuel filling rate for steady rotating detonation is obtained. Moreover, the initial fuel distribution also influences the delay time of fuel deflagration to detonation transition.

Progress of continuously rotating detonation engines

Research on the Influence of Reflected Shock Wave on Continuously Rotating Detonation Engine

Experimental Investigation on H 2 / O 2 Continuously Rotating Detonation Engine

Recent Progress, Development Trends, and Consideration of Continuous Detonation Engines

Review on the Rotating Detonation Engine and It’s Typical Problems

Experimental Research on Ignition and the Stabilization Process in Rotating Detonation Chamber

Comprehensive Performance Analysis for the Rotating Detonation-Based Turboshaft Engine

Particle Path Tracking Method In Two- And Three-Dimensional Continuously Rotating Detonation Engines

Experimental Study on the Propagation Characteristics of Rotating Detonation Wave with Liquid Hydrocarbon/High-Enthalpy Air Mixture

Numerical Simulation of Continuous Rotating Detonation Engine in Column Coordinate

One Inducing Factor of the Operational Mode Transition in A Rotating Detonation Engine

Method based on controlling initial fuel distribution to establish stable rotating detonation wave in combustion chamber

Experimental validation of rotating detonation for rocket propulsion

Spectral Analysis and Self-Adjusting Mechanism for Oscillation Phenomenon in Hydrogen-Oxygen Continuously Rotating Detonation Engine

Numerical Investigation of Flow Particle Paths and Thermodynamic Performance of Continuously Rotating Detonation Engines

Primary Investigation on Ram-Rotor Detonation Engine

REALIZATION OF CONTINIOUSLY ROTATING DETONATION FOR SYNGAS-AIR MIXTURES

Characterization of wave modes in a kerosene-fueled rotating detonation combustor with varied injection area ratios

An Investigation on the Wave Multiplicity and Control of Operating Modes in the Hydrogen-Fueled Rotating Detonation Engine

Rotating Detonation Engine Injection Velocity Limit And Nozzle Effects On Its Propulsion Performance