An RSSI-based Wireless Sensor Node Localisation using Trilateration and Multilateration Methods for Outdoor Environment
Mohd Ismifaizul Mohd Ismail,Rudzidatul Akmam Dzyauddin,Shafiqa Samsul,Nur Aisyah Azmi,Yoshihide Yamada,Mohd Fitri Mohd Yakub,Noor Azurati Binti Ahmad Salleh
DOI: https://doi.org/10.48550/arXiv.1912.07801
2019-12-17
Abstract:Localisation can be defined as estimating or finding a position of the node. There are two techniques in localisation, which are range-based and range-free techniques. This paper focusses on the Received Signal Strength Indicator (RSSI) localisation method, which is categorised in a range-based technique along with the time of arrival, time difference of arrival and angle of arrival. Therefore, this study aims to compare the trilateration and multilateration method for RSSI-based technique for localising the transmitted (Tx) node. The wireless sensor module in the work used LOng-RAnge radio (LoRa) with 868MHz frequency. Nowadays, wireless networks have been a key technology for smart environments, monitoring, and object tracking due to low power consumption with long-range connectivity. The number of received (Rx) nodes are three and four for trilateration and multilateration methods, respectively. The transmitted node is placed at 32 different coordinates within the 10x10 meter outdoor area. The results show that error localisation obtained for General Error Localisation (GER) for multilateration and trilateration is 1.83m and 2.30m, respectively. An additional, the maximum and minimum error for multilateration and trilateration from 1.00 to 5.28m and 0.5 to 3.61m. The study concludes that the multilateration method more accurate than trilateration. Therefore, with the increasing number of Rx node, the accuracy of localisation of the Tx node increases.
Signal Processing,Networking and Internet Architecture