Abstract:Abstract Telescopes primarily transmit and receive laser beams over long distances as part of a gravitational wave interferometric measurement system. Due to factors such as optical design, fabrication, and alignment, the wavefront at the exit pupil of the telescope inevitably experiences distortion, resulting in wavefront aberrations that couple with pointing jitter to generate tilt-to-length (TTL) coupling noise. During the process of gravitational wave detection, the large distance between the primary and secondary mirrors and temperature fluctuations in space can cause significant axial misalignment between them. This results in a substantial displacement of the primary-secondary mirror system's primary focus along the axial direction, further degrading the wavefront at the exit pupil of the telescope. The TTL coupling noise caused in this scenario will affect the detection of gravitational waves, thus requiring the adjustment of the position of the three-four mirror system through the focusing system to minimize TTL coupling noise. In this paper, the model for TTL coupling noise was established using the first 36 orders of Zernike polynomials. The misalignment model of the primary-secondary mirror system was derived using geometric optics theory. The study investigates the influence of the telescope focusing system before and after focusing on the wavefront aberrations and TTL coupling noise at the exit pupil of the telescope. The analysis indicates that with a misalignment of 7.56 μm in the axial distance between the primary and secondary mirrors, the addition of a focusing system reduces the wavefront error at the exit pupil of the telescope from 0.0328 λ to 0.0046 λ. Furthermore, the maximum coupling noise between wavefront distortion and pointing jitter is reduced from 4 pm/Hz1/2 to 0.4 pm/Hz1/2. This provides valuable insights for the design of gravitational wave detection telescopes and the study of focusing systems.

Optimal design of a gravitational wave telescope system for the suppression of stray light

Optimized design of a gravitational wave telescope system based on pupil aberration

Recommended high performance telescope system design for the TianQin project

High-Performance Telescope System Design for Space-Based Gravitational Waves Detection

Design of detection optical system with large relative aperture

Research on the tilt-to-length Coupling Noise Suppression Method inside the Gravitational Wave Detection Telescope

Design of the primary mirror assembly for a space gravitational wave based on the optical path variation model

Rapid calculation method for backscattered light of a space gravitational-wave detection telescope

The impact of telescope aberrations on the magnitude of tilt to length coupling noise in space based gravitational wave detectors

Optical System Design for a Shortwave Infrared Imaging Spectrometer

Effect of the focusing system on measurements in gravitational wave detection telescope

Stray Light Control for the Space-Agile Optical System with a Pointing Mirror.

The next detectors for gravitational wave astronomy

Wide-field Optical Design for a 60 M Submillimeter Telescope

Analysis of Telescope Wavefront Aberration and Optical Path Stability in Space Gravitational Wave Detection

Optical design and coating optimization of the Wolter-I X-ray telescope

Optical design of a visible/short-wave infrared common-aperture optical system with a long focal length and a wide field-of-view

General design algorithm for stray light suppression of a panoramic annular system

Optimizing signal recycling for detecting a stochastic gravitational-wave background

Optimal Networks of Future Gravitational-Wave Telescopes

Design and Realization of Micro Fiber Spectrometers for Bioluminescence Detecting Systems' Stray Light Detection