Monoethanolamine-Based Fuels Hypergolic with Rocket-Grade Hydrogen Peroxide

Luca Caffiero,Stefania Carlotti,Filippo Maggi

DOI: https://doi.org/10.3390/aerospace11040309

IF: 2.66

2024-04-16

Aerospace

Abstract:The object of this work is to study the ignition performances of promising catalytically promoted amino-based green fuels to be used in combination with rocket-grade hydrogen peroxide. The main hypergolic parameter, the ignition delay time, was experimentally determined with an automated drop test setup. Additionally, the kinematic viscosity was experimentally measured, while the CEA2 software was used to determine the ideal rocket performances of the propellants. Three inorganic copper salts were selected as catalysts to be used in combination with monoethanolamine in concentrations ranging from 0.5 wt% to 20 wt%. Then, N,N-dimethylethylenediamine was introduced as part of a blend with monoethanolamine to target the high viscosity and low gravimetric specific impulse of the fuel for the pure monoethanolamine case. Due to the reduced monoethanolamine and low additive content, some formulations were observed to be characterized by gravimetric specific impulse higher than 320 s, and kinematic viscosity lower than 5 cSt while retaining ignition delay times shorter than 30 ms with 98 wt% HTP. Finally, the addition of ethanol to the blend was preliminarily investigated to improve the additive solubility. The effects on the ignition delay time were found to depend on the concentration ratio of the two amines.

engineering, aerospace

What problem does this paper attempt to address?

### What problems does this paper attempt to solve?

This paper aims to study the ignition performance when the green fuel based on monoethanolamine (MEA) is combined with rocket - grade hydrogen peroxide (HTP). Specifically, the paper mainly focuses on the following aspects:

1. **Improving ignition performance**: Through experiments, determine the effects of different additives and mixtures on the fuel's ignition delay time (IDT) to achieve a shorter IDT, thereby ensuring that the fuel can self - ignite rapidly when in contact with the oxidant. Traditionally, an IDT of less than 100 milliseconds is considered the standard for hypergolicity.

2. **Improving physical properties**: Evaluate and optimize the kinematic viscosity of the fuel to ensure that it has a lower viscosity for easy handling and transportation. At the same time, study how to reduce the fuel's freezing point and auto - ignition temperature (AIT) so that it remains liquid and is easy to ignite in a wider temperature range.

3. **Replacing traditional fuels**: Look for green alternatives that can replace traditional hydrazine - containing fuels (such as hydrazine and its derivatives). Although these traditional fuels have superior performance, they are strictly regulated because of their high toxicity, corrosiveness, and environmental hazards. Therefore, developing new low - toxicity and environmentally - friendly fuels is an important goal of this research.

4. **Theoretical performance evaluation**: Use CEA2 software to calculate the ideal rocket performance, including key parameters such as specific impulse, to evaluate the practical application potential of the new fuel combination.

5. **Safety and stability**: Ensure that the developed fuel formula not only has good ignition performance and physical properties but also can remain stable during long - term storage and minimize harm to human health and the environment.

In summary, the main purpose of this paper is to develop a green fuel based on monoethanolamine that can exhibit excellent ignition performance and physical properties when combined with rocket - grade hydrogen peroxide, while meeting environmental protection and safety requirements, and ultimately has the potential to replace traditional toxic fuels.