Abstract:Hydrodynamics in a 76mm i.d., 10.2m high circulating fluidized bed (CFB) riser and a 76mm i.d., 5.8m high CFB downer were studied for superficial gas velocities ranging from 2 to 5m/s and solid circulation rates up to 100kg/(m2s). Solid holdup, particle velocity and solid flux profiles in the radial and axial positions were presented. Under these operating conditions, axial solid holdup profiles in the riser and the downer could be approximated by an exponential decay function. The radial gradients of the solid holdup profiles in the riser were much higher than those in the downer, showing that the downer had much more uniform solid distribution. The average solid holdup for the entire riser was about 1.5 times higher than the predicted value from Gs/(ρpUg). However, for the downer reactor this ratio dropped to 0.45–0.98 which increased with increasing superficial gas velocity and decreasing solid circulation rate. Solid flow developed much slower in the riser than in the downer. Negative particle velocity was observed in the near-wall region for nearly the entire height of the riser. The average particle velocity for the entire riser was 0.8–0.96 times higher than the superficial gas velocity, and increased with increasing superficial gas velocity and decreasing solid circulation rate. However, in the downer the average particle velocity was 1.13–2.13 times higher than the superficial gas velocity, and increased with both superficial gas velocity and solid circulation rate. High local solid fluxes were observed in the near wall region of the CFB riser and downer reactor. Over-estimation of the calculated cross-sectional average solid flux over the solid circulation rate in the CFB riser was attributed to the fluctuations of the solid holdup and particle velocity.

A CFD study of gas–solid jet in a CFB riser flow

Steady-state Simulation of Core-Annulus Flow in a Circulating Fluidized Bed (CFB) Riser

CFD Simulation for Up Flow Jet-Loop Reactors by Use of Bi-Dispersed Bubble Model

CFD Simulation of Gas and Solid Flow Behavior in a Riser

Modeling Gas–Solid Flows in Circulating Fluidized Bed Risers Using Computational Fluid Dynamics

Discrete element simulation of gas-solids flow behavior in riser

Experimental Study on Gas-Solid Flow Charcteristics in a CFB Riser of 54M in Height

Numerical study on influence of exit geometry in gas–solid flow hydrodynamics of HDCFB riser by CPFD

Numerical Simulation of Fluid Dynamics of a Riser: Influence of Particle Rotation

Experimental Study of Exit Effect on Gas–solid Flow and Heat Transfer Inside CFB Risers

Experiment and multiphase CFD simulation of gas-solid flow in a CFB reactor at various operating conditions: Assessing the performance of 2D and 3D simulations

CPFD simulation of circulating fluidized bed risers

PIV measurement of the gas-solid flow pattern in a CFB riser

Advanced model for turbulent gas–solid flow and reaction in FCC riser reactors

Particle Size Distribution in Cpfd Modeling of Gas-Solid Flows in A Cfb Riser

A comparative study on hydrodynamics of circulating fluidized bed riser and downer

Flow Behavior of Clusters in a Riser Simulated by Direct Simulation Monte Carlo Method

Numerical Study on the Cluster Flow Behavior in the Riser of Circulating Fluidized Beds

Effects of Riser Height and Total Solids Inventory on the Gas–solids in an Ultra-Tall CFB Riser

Flow Characteristics in a Pilot-Scale Circulating Fluidized Bed with High Solids Flux Up to 1800 Kg/m2 S

A computational fluid dynamics study on the flow field in a liquid–solid circulating fluidized bed riser