Abstract:The development of environmentally friendly and energy-saving processes for recycling electronic waste (e-waste) is still relevant today. The research presented in this work relates to hydrometallurgy, namely, the electrochemical leaching of metals from e-waste under the action of alternating current (AC) into hydrochloric acid solutions of electrolytes, and can be used for leaching both noble and non-ferrous metals from secondary raw materials. The main object of the study was disintegrator-crushed mixed computer PCBs metal-rich powders with a particle size (d) of <90 μm. The impact of such leaching process parameters as temperature (Tel) and composition of the electrolyte solution, AC density (i) on the electrodes, experiment duration (tex) while maintaining a constant electrolyte temperature (60 °C, 70 °C, and 80 °C) on the metal (Au, Ag, Cu, Al, Ni, Pb, Sn, Ti, Zn, and Fe) leaching efficiency has been studied. In addition, under similar experimental conditions, but without external control of Tel, the kinetics of metal leaching from raw material powders obtained via PCBs single and double crushing in a disintegrator has been also presented. Comparison of raw material powders obtained from different batches of the source material showed both the variability of its chemical composition and the different kinetics of Au and Ag leaching under the same experimental conditions. The optimal conditions for pretreatment of the raw material obtained by single crushing in a disintegrator (CHCl = 6 mol·L−1, i = 0.88 A·cm−2, tex = 1 h, solid-to-liquid ratio—8.6 g·L−1 and without external control of Tel) were determined. It has been shown that this electrochemical pretreatment is accompanied by transition of only base metals into the electrolyte solution, making it possible to significantly reduce their concentration in the final solution. Under pretreatment conditions, the following degree of metal leaching (RMe) has been established: RCu = 98.2%, RAl = 62.8%, RNi = 53.4%, RPb = 93.2%, RSn = 98.0%, RTi = 88.5%, RZn = 61.6%, and RFe = 78.8%. As a result of a subsequent two-hour electrochemical treatment of a solid residue, the degree of leaching of gold and silver was 73.6% and 86.7%, respectively. The presented results provide a broader understanding of the possibility of using the proposed electrochemical hydrochlorination method for noble and base metals leaching from waste PCBs. The novelty and practical value of this research is a validation of the developed technology in laboratory conditions using the real batch of the PCBs. This approach may also be useful to researchers involved in the recycling of other types of secondary raw materials.

Effect of mechanical pre-treatment on the recovery potential of rare-earth elements and gold from discarded hard disc drives

A Multi-stage Process for Recovery of Neodymium (Nd) and Dysprosium (Dy) from Spent Hard Disc Drives (HDDs)

Recovery opportunities of valuable and critical elements from WEEE treatment residues by hydrometallurgical processes

Economic assessment and carbon footprint of recycling rare earths from magnets: Evaluation at lab scale paving the way toward industrialization

Recovery of rare earth elements from electronic waste by diffusion dialysis

Process optimization for acidic leaching of rare earth elements (REE) from waste electrical and electronic equipment (WEEE)

A Review of the Occurrence and Recovery of Rare Earth Elements from Electronic Waste

RECOVERING RARE EARTH OXIDE FROM NdFeB MAGNET OF WASTE HDDs BY LEACHING AND SELECTIVE PRECIPITATION METHODS

Hydrometallurgical Recovery of Rare Earth Elements from Mine Tailings and WEEE

Selective Recovery of Gold from E-Waste Recycling Plants' Waste Fractions: Waste-to-Resource Transition

Economic Aspects of Mechanical Pre-Treatment's Role in Precious Metals Recovery from Electronic Waste

Selective recovery of rare earth elements from acetic leachate of NdFeB magnet by solvent extraction

Identification and Recovery of Rare Earth Elements from Electronic Waste: Material Characterization and Recovery Strategies

The recovery of rare earth elements from waste electrical and electronic equipment: A review

Rare Earth Elements Recycling Potential Estimate Based on End-of-Life NdFeB Permanent Magnets from Mobile Phones and Hard Disk Drives in Brazil

Investigation of the Impact of Electrochemical Hydrochlorination Process Parameters on the Efficiency of Noble (Au, Ag) and Base Metals Leaching from Computer Printed Circuit Boards

The Role of Particle Size and Shape on the Recovery of Copper from Different Electrical and Electronic Equipment Waste

Environmental and Economic Assessment of a Portable E-Waste Recycling and Rare Earth Elements Recovery Process

Selective Recovery of Rare Earth Elements from a Wide Range of E-Waste and Process Scalability of Membrane Solvent Extraction

Surfactant-based enrichment of rare earth elements from NdFeB magnet e-waste: Optimisation of cloud formation and rare earths extraction

The importance of recovering precious metals from waste electrical and electronic equipment