Abstract:In recent years, all solid-state batteries (SSBs) have gained significant attention as the next-generation energy storage device due to their high energy density, improved safety, and enhanced stability. Sulfide-based solid electrolytes (SEs) have garnered significant attention among various inorganic materials for their exceptional properties, including high ionic conductivity and robust mechanical properties. These features make them promising candidates for SSBs, ensuring both manufacturability and long-term cycle life. For example, Li-argyrodites (e.g., Li 6 PS 5 X, and X = Cl, Br, I) and Na-thioantimonate (e.g., Na 2.88 Sb 0.88 W 0.12 S 4 ) offer high ionic conductivities (> 10 -3 S/cm) that are comparable to those of liquid electrolytes. However, its practical application is still under-achieved due to a few technical challenges. Among the various issues, our focus is on the electrode-electrolyte interphase, which degrades the cycle life of the SSBs. At the cathode-electrolyte interphase, narrow electrochemical window (1.71 V – 2.01 V) of Li 6 PS 5 X unwantedly prompt the oxidative decomposition of solid-electrolyte. At the anode-electrolyte interphase, Li-argyrodite SEs can be easily reduced by Li metal or oxidized by cathode active materials because of its narrow electrochemical window (1.71 V – 2.01 V). The resulting byproducts at electrode-electrolyte interphases can unwantedly lead to capacity fading and an increase in cell resistance. Additionally, SSBs made with the Li-argyrodite SEs suffer from Li-dendrite penetration during repeated cycles and consequent internal short circuits. To address these challenges, we propose strategies for passivating the interphases between the cathode and the solid electrolyte, as well as between the metallic anode and the electrolyte in solid-state batteries (SSBs). Through a combinatorial study, we aim to elucidate the extent and severity of interfacial side reactions in solid-state batteries (SSBs). In addition, the optimal coating strategies of LiNbO 3 for cathodes and Li 3 N coating on metallic Li anode will be discussed. The optimized Li 3 N as an artificial solid electrolyte interphase (SEI) layer on the metallic Li anode enables more than 5000 cycles without failure in symmetrical cells. Furthermore, we will also highlight a strategy for passivating the electrode-electrolyte interphases of Na-based solid-state batteries (SSBs) that employ thioantimoniate as the electrolyte material. The approaches to passivate the cathode and metallic Na anode will be presented. Comprehensive electrochemical and spectroscopic studies will be conducted to identify the source of degradation and elucidate the improvement mechanisms associated with each strategy.

Enhancing the interfacial stability of all-solid-state high-energy sodium-ion batteries by coating materials: First principles calculations

Probing Solid–Solid Interfacial Reactions in All-Solid-State Sodium-Ion Batteries with First-Principles Calculations

Ab initio investigation of the stability of electrolyte/electrode interfaces in all-solid-state Na batteries

Critical interface between inorganic solid-state electrolyte and sodium metal

(Invited) Strategies for Enhancing the Stability of the Electrode-Electrolyte Interphase in Sulfide-Based Solid-State Batteries

Composite Electrolytes and Interface Designs for Progressive Solid‐state Sodium Batteries

Compatibility Issues Between Electrodes And Electrolytes In Solid-State Batteries

Boosting the interfacial superionic conduction of halide solid electrolytes for all-solid-state batteries

Elucidating Solid Electrolyte Interphase Formation in Sodium-Based Batteries: Key Reductive Reactions and Inorganic Composition

Phase‐Transition Interlayer Enables High‐Performance Solid‐State Sodium Batteries with Sulfide Solid Electrolyte

Research progress of solid electrolyte interphase for sodium metal anodes

Insight into the structural and electrochemical properties of the interface between a Na6SOI2 solid electrolyte and a metallic Na anode

Solid Electrolytes and Interfaces in All-Solid-state Sodium Batteries: Progress and Perspective

Stabilizing Electrode-Electrolyte Interface Via Crown Ether-Containing Selective Coating for Dendrite-Free Na-K Anode-Based Solid-State Sodium Batteries

Inorganic sodium solid-state electrolyte and interface with sodium metal for room-temperature metal solid-state batteries

Enhanced Electrochemical Stability and Extended Cycle Life in Sulfide-Based All-Solid-State Batteries: The Role of Li10 SnP2 S12 Coating on Ni-Rich NCM Cathode

Enhancing Interfacial Stability in Sulfide All-Solid-state Batteries Through Surface Dual-Doping of Zr and F in Ni-rich Cathodes

Inorganic‐Enriched Solid Electrolyte Interphases: A Key to Enhance Sodium‐Ion Battery Cycle Stability?

Strategies to Boost Ionic Conductivity and Interface Compatibility of Inorganic - Organic Solid Composite Electrolytes

Tuning the cathode/solid electrolyte interface for high‐performance solid‐state Na‐ion batteries

Reactivity-Guided Interface Design in Na Metal Solid-State Batteries