Abstract:Polyindole (Pind) is one of the conducting polymers (CPs) which previously was less studied but of recent is gaining attention for energy storage applications. In all the few previous reports, when Pind was employed as electrode active material in supercapacitors, the capacitance was reported low with reasonable values only being obtained as a composite with other materials. The reasons underlying the poor performance of Pind and Pind nanocomposites are thought to be: 1) inactive morphology and limited surface area, 2) poor conductivity, and 3) poor electrode fabrication techniques. To address the trio, we employed the traditional, easy and scalable electrospinning technique to fabricate high surface area electroactive Pind nanofibers. Further, a little percentage (10 wt.%) of carbon nanotubes (CNTs) were added to enhance the conductivity of Pind and to study the effect of our fabrication route on the nanocomposites. Significant capacitance improvements of up to 238 F g(-1) and 476 F g(-1) at 1.0 A g(-1) for Pind and Pind/CNT freestanding electrospun electrodes, respectively were achieved. Moreover, we report the significant performance of the all-solid-state symmetric, flexible and binder-free supercapacitor fabricated by a one-step and scalable method of as-electrospun Pind/CNT nanofibers on the stainless steel fabric current collector. The supercapacitor showed a high energy density of 17.14 W h kg(-1) at a power density of 426 W kg(-1) and capacitance retention of 95% after 2000 cycles. We strongly believe that we have set a stage for Pind to compete in a healthy race with other CPs as a next generation electrode material for supercapacitors. (C) 2017 Elsevier Ltd. All rights reserved.

Aromatic Polyaroxydiazole Pseudocapacitive Anode Materials with Tunable Electrochemical Performance through Side Group Engineering

Robust and Fast Lithium Storage Enabled by Polypyrrole-Coated Nitrogen and Phosphorus Co-Doped Hollow Carbon Nanospheres for Lithium-Ion Capacitors

Vertically Aligned Micropillar Arrays Coated with a Conductive Polymer for Advanced Pseudocapacitance Energy Storage

Pulse‐potential Electrochemistry to Boost Real‐life Application of Pseudocapacitive Dual‐doped Polypyrrole

Unveiling Polyindole: Freestanding As-electrospun Polyindole Nanofibers and Polyindole/Carbon Nanotubes Composites As Enhanced Electrodes for Flexible All-solid-state Supercapacitors

Polymeric cathode materials of electroactive conducting poly(triphenylamine) with optimized structures for potential organic pseudo-capacitors with higher cut-off voltage and energy density

Redox Poly‐Counterion Doped Conducting Polymers for Pseudocapacitive Energy Storage

High pseudocapacitance electrode enabled by heterovalent doping and surface coating for rapid charge storage

Asymmetric supercapacitor devices based on dendritic conducting polymer and activated carbon

Tuning N/O-doped carbon materials for supercapacitors by direct pyrolysis of imidazolinium polymer

Yeast-derived N-doped carbon microsphere/polyaniline composites as high performance pseudocapacitive electrodes

Heterostructured polypyrrole/hybrid iron oxide composite film as highly stable anode for pseudocapacitors

Polyaniline nanowires aligned on MOFs-derived nanoporous carbon as high-performance electrodes for supercapacitor

A General Approach Toward Enhancement of Pseudocapacitive Performance of Conducting Polymers by Redox-Active Electrolytes

Polyanthraquinone-based Nanostructured Electrode Material Capable of High-Performance Pseudocapacitive Energy Storage in Aprotic Electrolyte

Highly planar pseudocapacitive semiconducting polymer electrodes toward symmetric supercapacitors with a wide range of operating potentials

Au-assisted Polymerization of Conductive Poly(n-Phenylglycine) As High-Performance Positive Electrodes for Asymmetric Supercapacitors

3D Nitrogen-Doped Graphene Decorated CoNi2S4@polypyrrole Electrode for Pseudocapacitor with Ultrahigh Electrochemical Performance

Pedot:Pss-Assisted Polyindole Hollow Nanospheres Modified Carbon Cloth As High Performance Electrochemical Capacitor Electrodes

Precisely Designed Mesoscopic Titania for High-Volumetric-Density Pseudocapacitance

Facile Synthesis of Three-Dimensional Structured Carbon Fiber-Nico2o4-ni(oh)2 High-Performance Electrode for Pseudocapacitors