Abstract:Purpose The purpose of this paper is to obtain values that stabilize the lateral and longitudinal flight of the quadrotor for which the morphing amount and the best Proportional-Integral-Derivative (PID) coefficients are determined by using the simultaneous perturbation stochastic approximation (SPSA) optimization algorithm. Design/methodology/approach Quadrotor consists of body and arms; there are propellers at the ends of the arms to take off and rotors that rotate them. By reducing the angle between mechanism 1 and the rotors with the horizontal plane, the angle between mechanism 2 and the arms, the rotors rise and different configurations are obtained. Conventional multi-rotor aircraft has a fixed fuselage and does not need a tail rotor to change course as helicopters do. The translational and rotational movements are provided by the rotation of the rotors of the aircraft at different speeds by creating moments about the geometric center in 6-degree-of-freedom (DOF) space. These commands sent from the ground are provided by the flight control board in the aircraft. The longitudinal and lateral flight stability and properties of different configurations evaluated by dynamic analysis and simulations in 6 DOF spaces are investigated. An algorithm and PID controller are being developed using SPSA to achieve in-flight position and attitude control of an active deformable aircraft. The results are compared with the results of the literature review and the results of the previous article. Findings With SPSA, the best PID coefficients were obtained in case of morphing. Research limitations/implications The effects of quadrotor arm height and hub angle changes affect flight stability. With the SPSA optimization method presented in this study, the attitude is quickly stabilized. Practical implications With the optimization method, the most suitable PID coefficients and angle values for the lateral and longitudinal flight stability of the quadrotor are obtained. Social implications The transition rate and PID coefficients are determined by using the optimization method, which is advantageous in terms of cost and practicality. Originality/value With the proposed method, the aircraft can change shape to adapt to different environments, and the parameters required for more stable flight for each situation will be calculated, and this will be obtained more quickly and safely with the SPSA optimization method.

Octorotor flight control system design with stochastic optimal tuning, deep learning and differential morphing

Unsteady Flow Simulation of a Variable-Sweep Morphing Aircraft Coupled with Flight Control System

Simultaneous arm morphing quadcopter and autonomous flight system design

Integral Backstepping-based Nonlinear Flight Control Strategy for Quadrotor Aerial Robot with Unknown Mass

Multidisciplinary Performance Enhancement on a Fixed-wing Unmanned Aerial Vehicle via Simultaneous Morphing Wing and Control System Design

Design of Thrust Vectoring Vertical/Short Takeoff and Landing Aircraft Stability Augmentation Controller Based on L1 Adaptive Control Law

L1 Adaptive Control Based on Dynamic Inversion for Morphing Aircraft

Disturbance observer‐based model predictive control of a coaxial octorotor with variable centre of gravity

Adaptive Neural Control Based on High Order Integral Chained Differentiator for Morphing Aircraft

Rotor Cross-Tilt Optimization of Manned Multi-rotor Evtol Aircraft for Yaw Control Efficiency

Design optimization of multi-objective proportional–integral–derivative controllers for enhanced handling quality of a twin-engine, propeller-driven airplane

Autonomous flight performance optimization of fixed-wing unmanned aerial vehicle with morphing wingtip

Modeling and Controls of Fluid-Structure Interactions (FSI) in Dynamic Morphing Flight

Design of Active Disturbance Rejection Control System for Morphing Flight Dynamics

Development of a Full Orientation Flight Robotics: Dynamics Modeling, Analysis, and Control Design

Linear parameter-varying-based transition flight control design for a tilt-rotor aircraft

Trajectory Tracking Control of a Morphing UAV using Radial Basis Function Artificial Neural Network Based Fast Terminal Sliding Mode: Theory and Experimental

A Computationally Efficient Learning-Based Model Predictive Control for Multirotors under Aerodynamic Disturbances

Unified incremental nonlinear controller for the transition control of a hybrid dual-axis tilting rotor quad-plane

Adaptive Robust constraint-following control for morphing quadrotor UAV with uncertainty: A segmented modeling approach

Modeling and control of a class of urban air mobility tiltrotor aircraft