Abstract:The catalytic conversion of dinitrogen (N-2) into ammonia under ambient conditions represents one of the Holy Grails in sustainable chemistry. As a potential alternative to the Haber-Bosch process, the electrochemical reduction of N-2 to NH3 is attractive owing to its renewability and flexibility, as well as its sustainability for producing and storing value-added chemicals from the abundant feedstock of water and nitrogen on earth. However, owing to the kinetically complex and energetically challenging N-2 reduction reaction (NRR) process, NRR electrocatalysts with high catalytic activity and high selectivity are rare. In this contribution, as a proof-of-concept, we demonstrate that both the NH3 yield and faradaic efficiency (FE) under ambient conditions can be improved by modification of the hematite nanostructure surface. Introducing more oxygen vacancies to the hematite surface renders an improved performance in NRR, which leads to an average NH3 production rate of 0.46 mu g h(-1) cm(-2) and an NH3 FE of 6.04 % at -0.9 V vs. Ag/AgCl in 0.10 m KOH electrolyte. The durability of the electrochemical system was also investigated. A surprisingly high average NH3 production rate of 1.45 mu g h(-1) cm(-2) and a NH3 FE of 8.28 % were achieved after the first 1 h chronoamperometry test. This is among the highest FEs reported so far for non-precious-metal catalysts that use a polymer-electrolyte-membrane cell and is much higher than the FE of precious-metal catalysts (e.g., Ru/C) under comparable reaction conditions. However, the NH3 yield and the FE dropped to 0.29 mu g h(-1) cm(-2) and 2.74 %, respectively, after 16 h of chronoamperometry tests, which indicates poor durability of the system. Our results demonstrate the important role that the surface states of transition-metal oxides have in promoting electrocatalytic NRR under ambient conditions. This work may spur interest towards the rational design of electrocatalysts as well as electrochemical systems for NRR, with emphasis on the issue of stability.

Enhanced electrocatalytic nitrogen reduction inspired by a lightning rod effect on urchin-like Co3O4 catalyst

Modulation of surface properties on cobalt phosphide for high-performance ambient ammonia electrosynthesis

Interfacial electric field triggered N2 activation for efficient electrochemical synthesis of ammonia

Modulating Nitrogen Adsorption Mode and Microenvironment of Active Sites for Boosting Electrochemical Nitrogen Reduction

Porous and Partially Dehydrogenated Fe2+‐Containing Iron Oxyhydroxide Nanosheets for Efficient Electrochemical Nitrogen Reduction Reaction (ENRR)

Efficient and Durable N2 Reduction Electrocatalysis under Ambient Conditions: Β-Feooh Nanorods As a Non-Noble-metal Catalyst.

Regulating the Electronic Configuration of Supported Iron Nanoparticles for Electrochemical Catalytic Nitrogen Fixation

Cu/NiO nanorods for efficiently promoting the electrochemical nitrate reduction to ammonia

In Situ Preparation and Performance of Iron Based Electro-magnetic Synergistic Electrochemical Nitrogen Fixation Catalysts

Highly Selective Electrochemical Reduction Of Dinitrogen To Ammonia At Ambient Temperature And Pressure Over Iron Oxide Catalysts

Dynamically Restructuring Nanoporous Cu-Co Electrocatalyst for Efficient Nitrate Electroreduction to Ammonia

Fe(III) grafted MoO<sub>3</sub> nanorods for effective electrocatalytic fixation of atmospheric N<sub>2</sub> to NH<sub>3</sub>

Fe(III) grafted MoO3 nanorods for effective electrocatalytic fixation of atmospheric N2 to NH3

Electrochemical N-2 Fixation to NH3 under Ambient Conditions: Mo2N Nanorod As a Highly Efficient and Selective Catalyst

Two-Dimensional N-Doped Carbon with Embedded Microfluidic-Architected Fe, Mo Nanodots Toward Efficient Electrocatalytic Nitrogen Reduction

Repairable body-centered cubic Fe 0 anchoring on porous hollow nitrogen-doped carbon spheres with adjusting electron distribution for efficient electrocatalytic ammonia synthesis

Multi‐Site Electrocatalysts Boost pH‐Universal Nitrogen Reduction by High‐Entropy Alloys

New Insights into Mechanisms on Electrochemical N2 Reduction Reaction Driven by Efficient Zero-Valence Cu Nanoparticles

A Cu/Fe3O4@CN tandem catalyst for efficient ammonia electrosynthesis from nitrate reduction

Rational Design of Fe–N/C Hybrid for Enhanced Nitrogen Reduction Electrocatalysis under Ambient Conditions in Aqueous Solution

Creating Highly Active Iron Sites in Electrochemical N2 Reduction by Fabricating Strongly-Coupled Interfaces