Abstract:The concept of biomass CaO-sorbent based Chemical Looping Gasification (CLG) have gained increasing attention for its ability of reducing CO2 emission by in situ CO2 capture, allowing for the production of a CO2-rich stream for sequestration and a high-hydrogen-content product gas. The core unit of CLG system is comprised of an interconnected dual-circulating fluidised bed reactors: the gasifier and the combustor (regenerator). Biomass feedstock is given into the gasifier, in which steam is gasifying agent and fluidizing wind, CaO sorbent could absorb CO2 generated from biomass gasification through carbonation, which changes the chemical equilibrium and strongly stimulates H2 production. In combustor, the remain char from gasifier burns with air/O2, generates the necessary heat for the CaCO3 decomposition and sensible heat delivery through bed material circulation. In this research, parametric analyses on the dual-fluidized bed system were carried out based on ASPEN Plus simulation. Gibbs free energy minimization approach was used to build the reactors model, the PB-RM is chosen as the property method. Native pine sawdust was chosen as feedstock, at a feed rate of 10 t/hr. Mass and energy coupling of two reactors are calculated by setting the combustor temperature at 900°C constantly. The compositions of the product gases, hydrogen yield & hydrogen production efficiency (HPE), cold gas efficiency (CGE) and gasifier carbon conversion ratio were correlated to the gasification operating variables, such as gasifier temperature (T), pressure (P), minimum mole ratio of CaO to carbon ([Ca]/[C]), and mole ratio of steam to carbon ([H2O]/[C]). The appropriate temperature should consider two aspects: the thermodynamics and the chemical kinetics in gasifier. The model shows that higher temperature than 700°C may not fit for H2 production because of the dramatic decrease of H2 and increase of CO2 concentration in product gas, while the model also overlooked the backward chemical kinetics under lower temperatures than 700°C, which means 700°C maybe a favourable one. Pressure study demonstrate that higher pressure than atmosphere is obviously beneficial for H2 concentration, which increased from 84.5% to 93.9% when system pressure increased from 1 bar to 3 bar. 3 bar is likely the best value for the hydrogen production, at which the hydrogen yield and HPE was up to 43.7 mol·kg and 78.5%. Higher pressure than 3 bar is in favour of CGE and H2 concentration in product gas, but not observably. Thermodynamically there is a minimum value of [Ca]/[C], which is 0.296 in this biomass case under standard operating condition, to insure the absorption of CO2 in gasifier. But in reality, researchers must consider the sorbent maximum conversion, kinetics of CO2–sorbent reaction and sorbent capacity decay during cyclic carbonation–regeneration reaction, so that higher [Ca]/[C] than the minimum is needed, e. g. unity or larger. Optimal [H2O]/[C] can be discerned around 1.25, 76.14%

The process optimization and exergy efficiency analysis for biogas to renewable hydrogen by chemical looping technology

Numerical Study on the Process of Chemical Looping Hydrogen Production with Multiple Circulating Fluidized Bed Reactors

A Novel 2-Reactor Chemical Looping System for Hydrogen Production with Biogas as the Feedstock: Process Simulation and Comparison with Conventional Reforming Processes

Thermodynamic and kinetic analysis on the biomass syngas fueled chemical looping hydrogen generation process in fixed bed reactor

Renewable hydrogen production from biogas using iron-based chemical looping technology

Techno-Economic Analysis of Hydrogen and Electricity Production by Biomass Calcium Looping Gasification

Configuration Optimization of a Biomass Chemical Looping Gasification (CLG) System Combined with CO2 Absorption

Chemical looping pyrolysis-gasification of biomass for high H2/CO syngas production

System optimization and performance evaluation of shale gas chemical looping reforming process for efficient and clean production of methanol and hydrogen

New Process Combining Fe-Based Chemical Looping and Biomass Pyrolysis for Cogeneration of Hydrogen, Biochar, Bio-Oil and Electricity with In-Suit CO2 Separation

Thermodynamic and economic analysis of methane cycle carbon dioxide reforming thermally coupled with chemical looping combustion for liquid fuel production

Modelling and Optimization of Sorption-Enhanced Biomass Chemical Looping Gasification Coupling with Hydrogen Generation System Based on Neural Network and Genetic Algorithm

Simulation on Hydrogen Production from Biomass with Cao-Based Chemical Looping Gasification

Numerical simulation of gasifier optimization for combined hydrogen production and carbon reduction in a chemical looping gasification (CLG) system

High purity hydrogen production via coupling CO2 reforming of biomass-derived gas and chemical looping water splitting

Performance of hydrogen and power co-generation system based on chemical looping hydrogen generation of coal

Biomass chemical looping gasification for high-quality syngas: A critical review and technological outlooks

High purity hydrogen production via coupling CO 2 reforming of biomass-derived gas and chemical looping water splitting

Process modeling and analysis of a novel system achieving near-complete utilization of captured CO 2 from chemical looping hydrogen generation

Review of Biomass Chemical Looping Gasification in China

A techno-economic analysis of solar catalytic chemical looping biomass refinery for sustainable production of high purity hydrogen