Abstract:[d=(R1), comment= was reformulated according to suggestion of the Reviewer1]Air pollution monitoring in industrial regions like Moravia-Silesia faces challenges due to complex environmental conditions. Low-cost sensors offer a promising, cost-effective alternative for supplementing data from regulatory-grade air quality monitoring stations. This study evaluates the accuracy and reliability of a prototype node containing low-cost sensors for carbon monoxide (CO) and particulate matter (PM), specifically tailored for the local conditions of the Moravian-Silesian Region during winter and spring periods. An analysis of the reference data observed during the winter evaluation period showed a strong positive correlation between PM, CO, and NO2 concentrations, attributable to common pollution sources under low ambient temperature conditions and increased local heating activity. The Sensirion SPS30 sensor exhibited high linearity during the winter period but showed a systematic positive bias in PM10 readings during Polish smog episodes, likely due to fine particles from domestic heating. Conversely, during Saharan dust storm episodes, the sensor showed a negative bias, underestimating PM10 levels due to the prevalence of coarse particles. Calibration adjustments, based on the PM1/PM10 ratio derived from Alphasense OPC-N3 data, were initially explored to reduce these biases. For the first time, this study quantifies the influence of particle size distribution on the SPS30 sensor's response during smog episodes of varying origin, under the given local and seasonal conditions. In addition to sensor evaluation, we analyzed the potential use of data from the Copernicus Atmospheric Monitoring Service (CAMS) as an alternative to increasing sensor complexity. Our findings suggest that, with appropriate calibration, selected low-cost sensors can provide reliable data for monitoring air pollution episodes in the Moravian-Silesian Region and may also be used for future adjustments of CAMS model predictions.This study examines the varying performance of low-cost sensors during seasonal smog events, particularly those resulting from solid fuel combustion linked to residential or industrial heating and other pollution sources. A prototype low-cost sensor node developed within this work was collocated for several months with reference equipment at an air quality monitoring station in the city of Ostrava (the Moravian-Silesian region, Czech Republic). The deterioration of air quality during a pair of smog alert events, namely wintertime "Polish smog" episode and springtime "Saharan dust storm", which occurred through the extended period of co-location, was characterized quantitatively based on particulate matter and carbon monoxide concentrations measured by the low-cost sensors. These datasets were compared with reference data and model predictions provided by the Copernicus Atmospheric Monitoring Service. Selected low-cost sensors demonstrated a linear response during the Polish smog episode with a highly correlated time series of carbon monoxide and particulate matter concentrations. However, when compared to the reference data, the Sensirion SPS30 sensor is found to overestimate coarse particle (PM10) concentrations by the factor of two during the winter evaluation period. On the other hand, oppositely biased PM10 response (underestimation by the factor of five) was determined from the co-location measurement during the Saharan dust storm event. This observation was attributed to combination of the specific detection efficiency of the given low-cost sensor and shifts in particle size distribution due to seasonal change of ambient conditions.

Unveiling the potential of a novel portable air quality platform for assessment of fine and coarse particulate matter: in-field testing, calibration, and machine learning insights

Data Evaluation of a Low-Cost Sensor Network for Atmospheric Particulate Matter Monitoring in 15 Municipalities in Serbia

Design and evaluation of a portable PM2.5 monitor featuring a low-cost sensor in line with an active filter sampler

Characterising Low-Cost Sensors in Highly Portable Platforms to Quantify Personal Exposure in Diverse Environments

Stationary and portable multipollutant monitors for high-spatiotemporal-resolution air quality studies including online calibration

Feasibility of low-cost particulate matter sensors for long-term environmental monitoring: Field evaluation and calibration

Performance Assessment of Two Low-Cost PM2.5 and PM10 Monitoring Networks in the Padana Plain (Italy)

Evaluation of calibration performance of a low-cost particulate matter sensor using collocated and distant NO2

On-field test and data calibration of a low-cost sensor for fine particles exposure assessment

Calibration of NO, SO2, and PM using airify: A low-cost sensor cluster for air quality monitoring

Portable Sensors for Dynamic Exposure Assessments in Urban Environments: State of the Science

Low-cost sensors as an alternative for long-term air quality monitoring

Improving Data Quality of Low-Cost Light-Scattering PM Sensors: Toward Automatic Air Quality Monitoring in Urban Environments

Evaluation of a new low-cost particle sensor as an internet-of-things device for outdoor air quality monitoring

An In-Field Assessment of the P.ALP Device in Four Different Real Working Conditions: A Performance Evaluation in Particulate Matter Monitoring

Varying Performance of Low-Cost Sensors During Seasonal Smog Events in Moravian-Silesian Region

Precision and Accuracy of a Direct-Reading Miniaturized Monitor in PM2.5 Exposure Assessment

Deployment and Evaluation of a Network of Open Low-Cost Air Quality Sensor Systems

Evaluating the Performance of Low-Cost PM2.5 Sensors in Mobile Settings

Air Pollution Exposure Monitoring Using Portable Low-Cost Air Quality Sensors

Long-term Field Evaluation of Low-cost Particulate Matter Sensors in Nanjing