A Wideband High-Voltage Longitudinal Output Structure for Ka-Band Sheet Beam Traveling-Wave Tubes

Xinjie Li,Jianxun Wang,Yixin Wan,Wei Jiang,Zewei Wu,Guo Liu,Yong Luo

DOI: https://doi.org/10.1109/tmtt.2021.3060418

IF: 4.3

2021-04-01

IEEE Transactions on Microwave Theory and Techniques

Abstract:This article proposes a longitudinal output structure in Ka-band sheet beam traveling-wave tube (SBTWT) with an ultrawideband transmission and high breakdown collector voltage. A novel electromagnetic bandgap (EBG) cutoff structure is designed to separate the slow-wave structure (SWS) and the depressed collector. The large stopband property of the EBG structure is applied to achieve not only the high transmission and the low gap leakage but also the long gap distance to provide a high breakdown voltage of the depressed collector. The 3-D simulations of a single longitudinal structure show a full Ka-band (26.5–40 GHz) reflection of less than −20 dB and gap leakage less than −0.02 dB. The entire longitudinal output collector, including two large gaps cutoff structures and the over mode electron collecting parts, is designed and manufactured. The simulations show a bandwidth of 10.4 GHz with a reflection coefficient ${S} _{mathbf {11}}$ of lower than −20 dB. The cold test demonstrates the wild bandwidth of ~11.1 GHz with a reflection coefficient ${S} _{mathbf {11}}$ of lower than −15 dB. The hot test reveals a stable collector dc voltage of −14.2 kV.

engineering, electrical & electronic