Abstract:Graphene quantum dots (GQDs) have received great interest in the past few years due to its unique properties such as the quantum confinement and edge effects when their sizes are down to 10 nm. These new physical properties can induce size-dependent bandgap, and unique optical and electronic properties, which make them excellent materials for photovoltaics and photoelectochemical (PEC) devices. In a dye-sensitized solar cell (DSSC), light harvesting capability of dyes could be enhanced by Förster resonance energy transfer (FRET) phenomena, wherein energy is transferred from an excited donor fluorophore to a suitable acceptor dye molecule. The strict requirement that the overlap of the emission spectrum of donor and absorption spectrum of acceptor, which also requires proper band edge alignment between the them, significantly limits the variety of donors and acceptors suitable for the FRET-based DSSCs. In our DSSC work, graphene quantum dots were co-sensitized with N719 dyes and we successfully explored that the GQDs is a suitable donor material for the N719 dyes. From the emission and time decay spectra analysis, the FRET efficiency was measured to be 27 %. The power conversion efficiency ( ƞ) of the standard DSSC is 6.12 % with a short-circuit current density ( J sc ) of 12.74 mAcm -2 and open-circuit voltage ( V oc ) of 760 mV. The co-sensitization of GQD greatly enhances the ƞ up to 7.96 % with a J sc of 16.54 mAcm -2 and V oc of 770 mV. The co-sensitization of GQDs improved both the J sc and ƞ values by ~ 30 %. The FRET enhanced the overall light absorption capacity of the N719 dye and hence photocurrent generation of the DSSC. Moreover, the co-sensitization of GQDs increase the TiO 2 /dye/electrolyte interface resistance, which suppresses the charge recombination and leads to increased V oc value. For PEC water splitting, higher light absorption can also be achieved by utilizing light-matter interplaymechanisms, such as, surface plasmon resonance (SPR), plasmonicresonance energy transfer (PRET) and exciton−plasmon interactions (EPI). The optical properties of the semiconductor and metal nanoparticles (SNPs-MNPs) are strongly modified via EPI comparing to single NPs. Therefore, we have utilized the unique combination of GQDs and AuNPs (SNPs-MNPs) to effectively enhance PEC performance of TiO 2 nanorods (TNRs). The AuNP-GQD decorated TNR photoelectrode has achieved a superior PEC performance with a photocurrent density of 1.75 mAcm -2 at 1.23 V vs RHE, which is one of higher value obtained in PEC measurement using TiO 2 nanorods due to an efficient utilization of solar light. The experimental analysis has indicated that the AuNPs has contributed to the PRET / SPR-mediated hot electron injection into TiO 2 and the GQDs contributed to the improved electron injection into the TiO 2 . Moreover, the significantly improved PEC water splitting efficiency is attributed to the synergistic effect due to EPI and/or FRET between AuNPs and GQDs in addition to the good catalytic property of the AuNPs and the GQDs.

Near-infrared photoelectrochromic device with graphene quantum dot modified WO 3 thin film toward fast-response thermal management for self-powered Agrivoltaics

A near-infrared photoelectrochromic device with indoor thermal management for self-powered smart windows

Enhanced Performance of a Graphene/gaas Self-Driven Near-Infrared Photodetector with Upconversion Nanoparticles.

Self-Driven Infrared Electrochromic Device with Tunable Optical and Thermal Management

Near‐Infrared to Visible Light Converter by Integrating Graphene Transistor into Perovskite Quantum Dot Light Emitting Diodes (Adv. Mater. Technol. 8/2022)

Bidirectional Voltage Regulation for Integrated Photovoltachromic Device Based on P3HT‐Electrochromic Unit and Perovskite/Organic Tandem Solar Cells

An Electro‐Driven Dynamic and Multicolored Radiative Thermal Regulation Material for All‐Year‐Round Building Energy Saving

Supramolecular engineering of charge transfer in wide bandgap organic semiconductors with enhanced visible-to-NIR photoresponse

Enhancement of a Graphene-Based Near-Field Thermophotovoltaic System by Optimization Algorithms and Dynamic Regulations

Bioinspired multiscale hierarchical structure enables solar-thermal conversion for low-temperature aqueous electrochromic device

WO3 Nanorod Array-Modified Prussian Blue with Long Cycling Stability for High-Performance Dual-Band Electrochromic Materials

Designing Poly(3,4-ethylenedioxythiophene) Polystyrene Sulfonate/Graphene Oxide/Graphene Nanosheet/Polyethylene Glycol Phase-Change Composites with Superior Thermal Management for Photo-thermoelectric Generators

Spectral Regulation and Efficiency Optimization in Cr3+‐Doped Gadolinium Aluminum Gallium Garnet Near‐Infrared Ceramic Phosphors via Crystal‐Field Engineering

Omnidirectional Optical Engineering and Ternary Strategy for High‐Performance Indoor Organic Photovoltaics

Photothermoelectric Device Based on Near‐Infrared Absorption and Reflection of Transparent Conductive Oxides

Potential Gradient-Driven Dual-Functional Electrochromic and Electrochemical Device Based on a Shared Electrode Design

Efficient Quantum Dot Infrared Photovoltaic with Enhanced Charge Extraction via Applying Gradient Electron Transport Layers

Enhanced Coloration Time of Electrochromic Device Using Integrated WO3@PEO Electrodes for Wearable Devices

Photothermoelectric fabric devices based on poly-3,4-ethylene dioxythiophene nanowires with composite nanophase boundary structures for solar energy and water vapor harvesting

(Invited) Light Absorption Enhancement Using Graphene Quantum Dots in Dye-Sensitized Solar Cells and Photoelectrochemical Water Splitting

Electrochromic modulation of near-infrared light by WO3 films deposited on silver nanowire substrates