Abstract:The efficient development of selective materials for uranium recovery from wastewater and seawater is crucial for the utilization of uranium resources and environmental protection. The potential of graphene oxide (GO) as an effective adsorbent for the removal of environmental contaminants has been extensively investigated. Further modification of the functional groups on the basal surface of GO can significantly enhance its adsorption performance. In this study, a novel poly(amidoxime-hydroxamic acid) functionalized graphene oxide (pAHA-GO) was synthesized via free radical polymerization followed by an oximation reaction, aiming to enhance its adsorption efficiency for U(VI). A variety of characterization techniques, including SEM, Raman spectroscopy, FT–IR, and XPS, were employed to demonstrate the successful decoration of amidoxime and hydroxamic acid functional groups onto GO. Meanwhile, the adsorption of U(VI) on pAHA-GO was studied as a function of contact time, adsorbent dosage, pH, ionic strength, initial U(VI) concentration, and interfering ions by batch-type experiments. The results indicated that the pAHA-GO exhibited excellent reuse capability, high stability, and anti-interference ability. Specially, the U(VI) adsorption reactions were consistent with pseudo-second-order and Langmuir isothermal adsorption models. The maximum U(VI) adsorption capacity was evaluated to be 178.7 mg/g at pH 3.6, displaying a higher U(VI) removal efficiency compared with other GO-based adsorbents in similar conditions. Regeneration of pAHA-GO did not significantly influence the adsorption towards U(VI) for up to four sequential cycles. In addition, pAHA-GO demonstrated good adsorption capacity stability when it was immersed in HNO3 solution at different concentrations (0.1–1.0 mol/L) for 72 h. pAHA-GO was also found to have anti-interference ability for U(VI) adsorption in seawater with high salt content at near-neutral pH condition. In simulated seawater, the adsorption efficiency was above 94% for U(VI) across various initial concentrations. The comprehensive characterization results demonstrated the involvement of oxygen- and nitrogen-containing functional groups in pAHA-GO in the adsorption process of U(VI). Overall, these findings demonstrate the feasibility of the pAHA-GO composite used for the capture of U(VI) from aqueous solutions.

Nanoarchitectonics of poly(vinyl alcohol)/graphene oxide composite electrodes for highly efficient electrosorptive removal of U(VI) from aqueous solution

Nanofabricated chitosan/graphene oxide electrodes for enhancing electrosorptive removal of U(VI) from aqueous solution

Electrodeposition nanofabrication of graphene oxide/polypyrrole electrodes with high hybrid specific capacitance for enhancing U(VI) electrosorption

Graphene oxide functionalized with nano hydroxyapatite for the efficient removal of U(VI) from aqueous solution

Novel malonamide-amidoxime bifunctional polymers decorated graphene oxide/chitosan electrode for enhancing electrosorptive removal of uranium(VI)

Efficient Removal Of U(VI) Ions from Aqueous Solutions by Tannic Acid/Graphene Oxide Composites

Electrodeposited Polypyrrole/biomass-Derived Carbon Composite Electrodes with High Hybrid Capacitance and Hierarchical Porous Structure for Enhancing U(VI) Electrosorption from Aqueous Solution

Efficient removal of U(VI) from aqueous solution using poly(amidoxime-hydroxamic acid) functionalized graphene oxide

Synthesis of Graphene Oxide Nanoribbons/chitosan Composite Membranes for the Removal of Uranium from Aqueous Solutions

Electrochemical deposition of uranium oxide with an electrocatalytically active electrode using double potential step technique

Efficient removal of U(VI) from aqueous solution by hydroxyapatite/graphene oxide composite microspheres

Enhancing U(VI) Removal by Using Biomass-Derived Hierarchical Porous Carbon/α-Mno2 Nano Fiber Composites As High Hybrid Capacitance Electrodes for Capacitive Deionization

Fabrication of a Novel Electrospun Polyvinyl Alcohol/polyacrylic Acid Nanofiber Adsorbent Loading with Montmorillonite or Zeolite for Uranium (VI) Removal

Polyethyleneimine incorporated chitosan/α-MnO2 nanorod honeycomb-like composite foams with remarkable elasticity and ultralight property for the effective removal of U(VI) from aqueous solution

Surface Functionalization Graphene Oxide by Polydopamine for High Affinity of Radionuclides

Porous chitosan/biocarbon composite membrane as the electrode material for the electrosorption of uranium from aqueous solution

Nitrogen-doped carbon nanotube encapsulated Co 9 S 8 composite cathode for high-selective capacitive extraction of uranium (VI) from radioactive wastewater

Three-dimensional-printed hierarchical reduced graphene oxide/ethylenediamine filter with super-high uranyl ions with recycling capacity and unique selectivity

Growth of a mesoporous Zr-MOF on functionalized graphene oxide as an efficient adsorbent for recovering uranium (VI) from wastewater

Functionalized graphene oxide/sodium alginate beads with ion responsiveness for uranium trapping

Removal of uranium(VI) from simulated wastewater by a novel porous membrane based on crosslinked chitosan, UiO-66-NH2 and polyvinyl alcohol