Characterization of fracture and percolation processes in oil shale under conduction and convection heating modes based on micro-CT technology
Zhiqin Kang,Yilong Li,Lei Wang,Yuxing Zhang,Yingfang Zhou,Dong Yang,Guoying Wang,Jing Zhao,Yangsheng Zhao
DOI: https://doi.org/10.1016/j.jaap.2024.106601
IF: 6
2024-08-01
Journal of Analytical and Applied Pyrolysis
Abstract:Conduction heating and convection heating are the two main methods of in-situ oil shale extraction. The efficiency of heat injection and transfer, oil and gas transportation and production during in-situ oil shale extraction is directly controlled by shale structure and permeability. In this paper, pyrolysis tests of conduction-heated and convection-heated oil shale were carried out, micro-CT scans of the pyrolyzed oil shale were performed, and systematic comparisons of the differences in the pore structure of oil shale under the two heating modes were carried out, and the seepage-heat transfer simulation of oil shale at the fine-scale was realized by interfacing Avizo with the multi-field coupled finite element software Comsol. The results of the study show: the original oil shale sample produces a large number of irregular pores at different scales after conduction and convection heating, resulting in a significant increase in the representative elementary volume, which are 3.5 times higher than the original state. After conduction heating and convection heating, the porosity of oil shale increases by 2.96 and 3.15 times compared to the original state, respectively. The pore size distribution of oil shale in the original state ranges from 5 μm to 320 μm, which dramatically expands to 5–1400 μm when heated by conduction and convection, demonstrating that small-scale pores connect to form large-scale pores. In the original state, the percentage of oil shale pore shape factor of 0.0625 was as high as 29 %, the percentage of oil shale pore shape factor in the range of 0.005–0.032 was significantly increased by conductive heating treatment, and the percentage of pore shape factor in the range of 0.005–0.02 was slightly increased by the convective heating effect at the same temperature. The permeability and maximum heat transfer rate of oil shale after convective heating increased by 5.51 and 6.17 times, respectively, compared with conduction heating, and the pore-fracture connectivity of oil shale after convective heating was greatly improved compared with that of conduction heating, which reduced the emergence of dead-end fractures and isolated fractures, and improved the seepage capacity and heat transfer capacity of oil shale.
engineering, chemical,chemistry, analytical,energy & fuels