Abstract:Abstract Hydroxyapatite nanoparticles doped with silver AgHA-NPs were synthesized successfully then added with various mass fractions to a mixed solution of polyvinyl alcohol (PVA)/ carboxymethyl cellulose (CMC) using the casting technique. Experimentally, the influence of silver doped hydroxyapatite nanoparticles on the structural, optical, dielectric and antimicrobial properties of nanocomposite films was investigated. X-ray diffraction and Fourier transformation infrared spectroscopy were used to explore the structural features of these films. The XRD analysis revealed the amorphous nature of PVA/CMC blend and the intensity of the characteristic peak of the virgin polymers in the nanocomposite spectrum being much reduced as the doping level was increased. The FT-IR spectra indicated that the blend components were miscible by revealing the functional groups of two polymers that interacted through the formation of a hydrogen bond while, the FT-IR spectra of nanocomposite confirmed the good interaction between the blend chains and AgHA-NPs. The morphological graphs of the prepared blend were formed as hexagonal grains with size distribution around 18.36–24.11 μm. The addition of AgHA-NPs changed the surface morphology of the blend significantly. The optical properties of PVA/ CMC blend and nanocomposites films were measured in the 200–800 nm wavelength range. Optical measurements showed that the optical transmittance for pure blend was nearly 90% while it decreased to 50% with increasing AgHA-NPs contents up to 40 wt.%. The energy gap values calculated by Tauc's model and those determined by ASF model are consistent, where their values reduced by AgHA-NPs incorporation. The dielectric constant of all samples were studied in range of temperatures (303–405 K) and from100 kHz to 1.0 MHz, range of frequencies. The Correlated Barrier Hopping (CBH) is the most appropriate conduction mechanism based on the frequency dependence of the ac conductivity. Silver ion release was examined showed that he film loaded with 10 wt.% AgHA-NPs has a small release of silver ion, while the amount of the Ag + released from the samples increased slowly with increasing the content of AgHA-NPs. PVA/CMC/AgHA films were tested for antibacterial activity against both (Bacillus subtilis ) and (Escherichia coli ) as well as the anti-fungal activity against ( Candida albicans ),their results showing an increase in the activity index as the filling level of AgHA-NPs increases. The study confirmed that doping of AgHA-NPs into PVA/CMC improves both electrical conductivity and antimicrobial efficiency and these nanocomposites might be recommended for further work in biomedical applications such as wound dressing and infection control.

Incorporated Au/Se nanoparticles into HPMC/CMC blend for enhancing structural, optical and morphological properties: Hybrid nanocomposites for optoelectronic applications

Improving the structural, optical, and electrical properties of carboxymethyl cellulose/starch/selenium oxide nanocomposites for flexible electronic devices

Enhanced the structural, optical, electrical and magnetic properties of PEO/CMC blend filled with cupper nanoparticles for energy storage and magneto-optical devices

Physicochemical characteristics of a nanocomposite film based on purified sodium carboxymethylcellulose and selenium nanoparticles

Ameliorating and Tuning the Structural, Morphological, and Optical Characteristics of Chromium Oxide/Silicon Carbide Promising Hybrid Nanocomposites Doped PMMA for Futuristic Nanoelectronics and Photonics Applications

Exploring the Relationship between Mechanical Properties and Electrical Impedance in Cement-Based Composites Incorporating Gold Nanoparticles

Enhancing the optical properties of chitosan, carboxymethyl cellulose, sodium alginate modified with nano metal oxide and graphene oxide

Nanocomposites comprising PVA/CMC matrix and CNTs/Fe 2 O 3 nanohybrid: A comparative investigation of structural, optical, electrical, and dielectric properties as an application in advanced electrochemical and optoelectronic devices

Preparation, characterization and optical studies of methylcellulose/CuO hybrid materials

Nanoarchitectonics and Characterization of Hydroxypropyl Methylcellulose (HPMC)/Chitosan (CS) Nanocomposites Doped with NiFe2O4 Nanorods for Optoelectronics and Energy Storage

Synthesis, structural and optical properties of Fungal biosynthesized Cu2O nanoparticles doped Poly methyl methacrylate -co- Acrylonitrile copolymer nanocomposite films using experimental data and TD-DFT/DMOl3 computations

Effect of aluminium ferrite nanofillers on carboxy methyl cellulose /poly(vinyl alcohol) biopolymer films: improved structural, electrical, optical, and dielectric properties

Enhancement of Structural, Optical, and Electrical Properties of Hydroxypropyl Methylcellulose/Polyvinyl Alcohol Nanocomposites by Nickel Ferrite Nanoparticles for Optoelectronic Applications

Enhancement of physico-chemical, optical, dielectric and antimicrobial properties of polyvinyl alcohol/carboxymethyl cellulose blend films by addition of silver doped hydroxyapatite nanoparticles

Fabrication of (Al2O3/CdO) metal and ceramic matrix composites reinforced CMC via laser ablation for optoelectronic applications‏

Fabrication and Characterization of Silver Nanoparticle-Doped Chitosan/Carboxymethyl Cellulose Nanocomposites for Optoelectronic and Biological Applications

Developing polymer nanocomposite films of ZnO/NiFe 2 O 4 nanohybrids, polyvinyl pyrrolidone, and chitosan for flexible electromagnetic applications and energy storage devices

Enhanced optical, morphological, dielectric, and conductivity properties of gold nanoparticles doped with PVA/CMC blend as an application in organoelectronic devices

Synthesis and improved optical, electrical, and dielectric properties of PEO/PVA/CuCo2O4 nanocomposites

Structural, optical, photoluminescence, and DFT studies of polyvinyl alcohol/carboxymethyl cellulose/copper tungstate hybrid metalorganic nanocomposite

Reinforcing the structure, optical, and dielectric spectroscopies of poly(ethylene oxide)/poly(methyl methacrylate) thermoplastics by CoFe nanoparticles for optoelectronic device fabrication