Abstract:Energy-saving, chemical-free, and high-efficiency microwave (MW)-assisted water treatment can be greatly facilitated via tailored design of an economical, sustainable, and 'green' carbonaceous catalyst. In this study, various biochars (BC) were pyrolyzed from two lignocellulosic waste biomasses, oak (O) and apple tree (A), at a high temperature (900 degrees C) and under different gases (N-2 and CO2). The holistic characterization by advanced spectroscopic techniques demonstrated that CO2 pyrolysis of feedstock with more lignin (Le., oak), produced biochar with increased aromaticity and degree of carbonization. CO2 modification created a hierarchical porous structure, improved surface hydrophilicity, polarity, and acidity, and provided higher densities of near-surface functionalities of the biochar. Without MW irradiation, ABC-900C (1 g L-1) provided the highest adsorption (52.6%, 1 min) of 2,4-dichlorophenoxy acetic acid (2,4-D) ascribed to large specific surface area, high micropore content, appropriate pore size, and abundant active groups. OBC-900C (1 g L-1) enabled significantly increased 2,4-D removal (81.6%, 1 min) under MW irradiation (90 degrees C) in contrast with an oil bath (55.7%, 90 degrees C, 1 min) and room temperature (33.9%, 1 min) conditions, due to its highest graphitization degree and medium-developed microporous structure. The MW-induced thermal effect formed "hot spots" on the biochar surface as evidenced by elevated temperature of the bulk solution and lowered energy consumption of the MW reactor in the presence of OBC-900C, compared to those of the other biochars. The scavenging tests suggested that the generation of highly oxidative hydroxyl ((OH)-O-center dot), anionic superoxide (O-2(center dot-)), and singlet oxygen (O-1(2)) radicals contributed to the removal of 2,4-D. This study has demonstrated that biochar with customized structure and high organic adsorption capacity can act as an effective MW absorber suitable for rapid and improved removal of toxic organics.

Fabrication of easily separated biochar balls and their catalytic mechanism for PMS

Catalytic Mechanism of Nitrogen-Doped Biochar under Different Pyrolysis Temperatures: the Crucial Roles of Nitrogen Incorporation and Carbon Configuration

Eco-friendly, Stable, and High-Performance Biochar Prepared by a Twice-Modification Scheme: Saccharification of Raw Materials & Thermal Air Oxidation of Biochar

Micro-structure, Surface Properties and Adsorption Capacity of Ball-Milled Cellulosic Biomass Derived Biochar Based Mineral Composites Synthesized Via Carbon-Bed Pyrolysis

Two-step ball milling-assisted synthesis of N-doped biochar loaded with ferrous sulfide for enhanced adsorptive removal of Cr(VI) and tetracycline from water

Non-radical pathway dominated degradation of organic pollutants by nitrogen-doped microtube porous graphitic carbon derived from biomass for activating peroxymonosulfate: Performance, mechanism and environmental application

Fe3O4 loaded on ball milling biochar enhanced bisphenol a removal by activating persulfate: Performance and activating mechanism

Removal and recovery of phosphorus from solution by bifunctional biochar

Pyrolysis of Biomass Wastes to N-Doped Biochar-Stabilized Co Nanoparticles for Efficient Pollutant Degradation Via Peroxymonosulfate Activation

A universal synthesis strategy for facile and scalable of magnetic biochar composite materials for PMS activation: catalytic mechanisms

Efficient degradation of phenol in water by ball-milling modulated nitrogen-doped structured biochar

Tailored Design of Graphitic Biochar for High-Efficiency and Chemical-Free Microwave-Assisted Removal of Refractory Organic Contaminants

Performance and mechanisms of NaOH and ball-milling co-modified biochar for enhanced the removal of Cd2+ in synthetic water: A combined experimental and DFT study

Molten Salt Induced Nitrogen-Doped Biochar Nanosheets As Highly Efficient Peroxymonosulfate Catalyst for Organic Pollutant Degradation

Fabrication of Pd/Sludge-biochar electrode with high electrochemical activity on reductive degradation of 4-chlorophenol in wastewater

Carbon stability and mobility of ball milled lignin- and cellulose-rich biochar colloids

Low-Temperature Reduction Synthesis of γ–Fe2O3−x@biochar Catalysts and Their Combining with Peroxymonosulfate for Quinclorac Degradation

Ball milling boosted hydrothermal N-doped sludge-derived biochar towards efficiently adsorptive removal of sulfamethoxazole from waters: Behavior, mechanism and DFT study

Ball milling potassium ferrate activated biochar for efficient chromium and tetracycline decontamination: Insights into activation and adsorption mechanisms

Enhanced adsorption complexation of biochar by nitrogen-containing functional groups

Removal of phosphate from water by paper mill sludge biochar