Abstract:Fault dislocation severely threatens the safety of a tunnel structure. Formerly, researchers mainly engaged in the mechanical response of mountain tunnels crossing the fault fracture zone. In contrast, few studies have focused on the structural stress characteristics and joint deformation of the cross-fault shield tunnels. There is an apparent difference between segmental tunnels and mountain tunnels with respect to mechanical properties. In the current study, a three-dimensional numerical model of cross-fault segmental tunnels is established based on the theory of concrete plastic damage constitutive relations using the finite element program ABAQUS. The numerical calculation results are compared with the model test results for validation. Subsequently, the relevant factors affecting the mechanical response of the shield tunnel crossing the active fault are analyzed. The results illustrate that when normal fault dislocation occurs, the shield tunnel structure is initially damaged appearing in the circumferential joints, which is prone to large tension deformation. Otherwise, when reverse faulting occurs by the same displacement, the shield tunnel structure is initially damaged at the arch haunch of the segments, and the deformation of the longitudinal joints is relatively slight. Under the same fault displacement, the bearing capacity of the segmental lining subjected to the reverse fault dislocation is more significant than that of the normal fault dislocation. Both the soil elastic modulus and the vertical distance between the top of the fault and the tunnel exert a considerable impact on the structural damage of the segmental tunnels, bolt stress, and joint deformation. The fault dip angle does not affect the mechanical characteristics of the shield tunnel structure when subjected to normal fault displacement. In reverse faulting cases, with the increase of the fault dip angle, the tunnel structural failure mode transforms from the transverse compression failure of the segments to the shear failure of the circumferential joints.

Transverse seismic responses of a shield tunnel considering the influence of segment joints

Characteristics of the Longitudinal Seismic Response of Shield Tunnel

Research on longitudinal nonlinear seismic response of shield tunnel

Numerical Study on the Longitudinal Deformation Pattern of Shield Tunnel

Research on Nonlinear Response of Shield Tunnel under Differential Subsidence Due to Earthquake

Longitudinal seismic response of shield tunnel: A multi-scale numerical analysis

Numerical study on mechanical behavior and ultimate bearing capacity of shield segment joints under different load conditions

Full-scale Loading Test for Shield Tunnel Segments: Load-bearing Performance and Failure Patterns of Lining Structures

Full-scale Experimental and Structural Characterization Study of Shield Tunnel Reinforcement under Ground Stacking Loads

Full-Scale Experimental Study on the Effect of Ground Surcharge on the Stress and Deformation of Shield Tunnels

Experiments and Numerical Simulation of the Reinforcement Effect of Channel-Steel-reinforced Shield Tunnel Segments under Unloading Conditions

Prediction of the additional structural response of segmental tunnel linings induced by asymmetric jack thrusts

Seismic response of a long shield tunnel crossing through multiple soil deposits

Longitudinal Seismic Response of a Shield Tunnel Considering Longitudinal Bolt Prestress under Transverse Excitation

Examination of Longitudinal Seismic Vulnerability of Shield Tunnels Utilizing Incremental Dynamic Analysis

Discontinuous mechanical behaviors of existing shield tunnel with stiffness reduction at longitudinal joints

Seismic response characteristics of shield tunnel structures in liquefiable soils

Numerical Study on High Stiffness Segmental Joints of Shield Tunnels

Structural Stress Characteristics and Joint Deformation of Shield Tunnels Crossing Active Faults

Seismic fragility analysis of in-service shield tunnels considering surface building and joint-bolt corrosion