Abstract:The recent studies on magnetically coupled resonant bidirectional wireless power transfer (MCR-BWPT) systems disregard the challenges posed by nonlinearity, discrete switching action, and hybrid properties within the system. This research focuses on the D-LCL resonant compensation topology MCR-BWPT system. The switch tube's switching state dictates the division of various working modes and the determination of the switching conditions between them. The coupling relationship between the continuous dynamic characteristics of the system and discrete events and the constrained conditions of the system are derived. The Hybrid System Description Language (HYSDEL) is used to build the Mixed Logic Dynamic (MLD) model of the system. The MLD model is employed as the prediction model, and the hybrid model predictive controller of the MCR-BWPT system is constructed according to the quadratic performance index. Finally, to verify the accuracy of the MLD model and the feasibility of the control strategy, the simulation model of the MLD model is established in MATLAB/Simulink. The study's findings show that, in terms of response time at system startup and power fluctuation suppression, the approach put forward in this research performs better than both the conventional bilateral dual-phase-shift control strategy and the PQ-based bilateral power control strategy. The MCR-BWPT system can operate more steadily now that PQ's bidirectional power control technique is in place. The system's forward and reverse transmission efficiency is increased by 0.29% and 0.32% compared to the conventional bilateral dual-phase-shift control approach; the increases are 0.28% and 0.09%, each compared to the bilateral power control strategy based on PQ.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the challenges brought by the nonlinearity, discrete switching actions and hybrid characteristics in the magnetically - coupled resonant bidirectional wireless power transfer (MCR - BWPT) system. Specifically, current research often ignores the impact of these complex characteristics on system modeling and control. This paper aims to propose a more accurate modeling method and control strategy by studying the MCR - BWPT system with D - LCL resonant compensation topology. ### Specific description of the problem: 1. **Nonlinearity**: The nonlinear characteristics in the MCR - BWPT system make it difficult for traditional modeling methods to accurately describe the dynamic behavior of the system. 2. **Discrete switching actions**: The state switching of the switching tubes in the system will lead to different working modes, and there is a strong coupling relationship between these discrete events and continuous state variables. 3. **Hybrid characteristics**: The MCR - BWPT system is a hybrid system containing discrete events and continuous dynamic characteristics. How to effectively model and control such a hybrid system is a challenge. ### Solutions: To solve the above problems, this paper proposes the following solutions: 1. **MLD modeling**: Use the Mixed Logical Dynamical (MLD) model to describe the hybrid characteristics of the system. The MLD model can handle discrete logical variables and continuous state variables simultaneously, thus more accurately describing the strong coupling relationship of the system. 2. **Predictive control strategy**: Design a hybrid model predictive controller based on the MLD model. This controller is optimized according to the quadratic performance index to ensure the stability and efficiency of the system. 3. **Simulation verification**: Establish a simulation model of the MLD model through MATLAB/Simulink to verify the effectiveness of the proposed modeling and control strategies. ### Main contributions: 1. Analyze the transmission characteristics of the D - LCL MCR - BWPT system, obtain the relationship between the transmission efficiency and the phase - shift angle between the two - side H - bridges, and divide four working modes according to the working states of the switching tubes. 2. By analyzing the operating characteristics of the system, obtain the hybrid dynamic behavior of the system, and use the HYSDEL language to effectively compile the continuous events and discrete events of the MCR - BWPT system to generate the MLD model. 3. Design a hybrid model predictive control strategy based on the MLD model, and prove the stability of the control system based on the Lyapunov stability criterion. Finally, verify the control performance of the system through MATLAB 2018b/Simulink simulation. In conclusion, by introducing the MLD model and predictive control strategy, this paper solves the modeling and control problems brought by the nonlinearity, discrete switching actions and hybrid characteristics in the MCR - BWPT system, and improves the stability and transmission efficiency of the system.

Research on MLD Modeling and Predictive Control of Magnetically Coupled Resonant Bidirectional WPT System

Model Predictive Control for the Receiving-Side DC–DC Converter of Dynamic Wireless Power Transfer

A Control Design Based on Eqivalent Circuit Model for Wireless Power Transmission System

Double Closed Loop Controller with Current Sharing of Interleaved DC/DC Converter for Dynamic Wireless Power Transfer System

Power Flow Control of Bidirectional Modular Multilevel Resonant Converters in MVDC and LVDC Distribution Networks

Model Predictive Control Of Semi-Controllable Open Winding Pmsg Based On Three Level Npc Converter

A Comprehensive Control Method with Model Predictive Function of MMC-HVDC System under Unbalanced Grid Faults

A MCR‐WPT system based on LCL‐S/P hybrid compensation network with CC/CV and maximum power optimization suiting for battery charging

Control Strategies for LCC-MMC Hybrid DC System Connected to Passive Networks

Identification and Control of LCC-S WPT Systems Using a Linear Parameter Varying Model

Power stabilization control of wireless charging system based on LCL‐P compensation structure

Synchronization Strategy Based on Resonant Current Detection for Bidirectional Wireless Charging System

Duty Cycle Control Strategy for Dual-Side LCC Resonant Converter in Wireless Power Transfer Systems

Moving Discretized Control Set Model-Predictive Control for Dual-Active Bridge With the Triple-Phase Shift

Dual-Side Independent Switched Capacitor Control for Wireless Power Transfer with Coplanar Coils

Model Predictive Control Strategy for DAB-LLC Hybrid Bidirectional Converter Based On Power Distribution Balance

An Adaptive Impedance Matching System With Fast Optimization Control Algorithm for Wireless Power Transfer via Magnetic Coupling Resonance

Improved Model Predictive Control for Three-Phase Dual-Active-Bridge Converters With a Hybrid Modulation

A Review of Research on Dual-Side Control Methods for Magnetic Coupling Wireless Power Transfer Systems Based on Dual-Active Bridge Converters

Model Predictive Direct Duty-Cycle Control for PMSM Drive Systems With Variable Control Set

Research on optimization method for passive control strategy in CLLC-SMES system based on BP neural network