Abstract:Nonlinear energy sink (NES) is a typical representative of emerging vibration control devices in recent years. With the increasing performance requirements of vibration suppression equipment for precision instruments and structural safety, it is necessary to research efficient and stable nonlinear energy sinks. A novel NES with inerter and grounded stiffness (IG-NES) is presented to address three key problems, i.e., the performance degradation caused by the high-branch response, the underutilization of the two-terminal inertia feature of the inerter, and the unknown damping effect of the combined structure of inerter and grounded stiffness. The amplitude–frequency response equation of the primary system is obtained by the harmonic balance method, and its parametric effects are analyzed. According to the H∞ optimization criterion, the multi-objective grey wolf algorithm is used to obtain the optimal system parameters. This model can be simplified to obtain the cubic stiffness NES, and the feasibility of eliminating the high-branch response by parameter optimization without changing its structure is explored. The results show that the IG-NES system has rich dynamic characteristics. Relying on parameter optimization, the high-branch response of the cubic stiffness NES can be eliminated. The damping effect and response mechanism under various excitations are different. The vibration suppression capability of IG-NES under different mass ratios and excitation amplitude ratios is significant. The vibration attenuation efficiency can reach more than 99%, and the displacement transmissibility of the primary system can reach below zero. The high-branch response is also eliminated. Stable solutions are available in the whole-frequency band. Moreover, it has certain robustness in its parameters. The amplitude–frequency curves of some optimal performance cases have double peaks with almost equal height, where the frequency ratio of the left peak is zero, similar to the grounded linear dynamic vibration absorber (DVA). The damping effect and bandwidth are superior to the basic NES, DVA, and equivalently improved DVA. This model can be applied to large and precise equipment, and its performance can be further enhanced in the future by new structures or devices.

Nonlinear dynamic analysis of a cable-stayed beam with a nonlinear energy sink

Vibration suppression of a cable-stayed beam by a nonlinear energy sink

Electrostatic-Nonlinear Beam Coupling Problem Solved by Galerkin Spectral Method

Nonlinear Dynamic Response of Stay Cables under Axial Harmonic Excitation

Modeling, dynamics, and parametric studies of a multi-cable-stayed beam model

Non-linear Dynamics of Cable-Stayed Beams

Internal resonance and energy transfer of a cable-stayed beam with a tuned mass damper

Analytical Solution and Energy Flow Analysis of a Vertical Vibration‐Controlled System Using the Nonlinear Energy Sink

Dynamics of a linear beam with an attached local nonlinear energy sink

Nonlinear Energy Sink for Whole-Spacecraft Vibration Reduction

Vibration suppression of a geometrically nonlinear beam with boundary inertial nonlinear energy sinks

Revisited dynamic modeling and eigenvalue analysis of the cable-stayed beam

Nonlinear Normal Modes of a Continuous Cantilever Beam with Nonlinear Energy Sink Absorber

Nonlinear resonant response of the cable-stayed beam with one-to-one internal resonance in veering and crossover regions

Cable force adjustment and post-adjusting nonlinear analysis of a cable-stayed bridge based on ANSYS

Vibration suppression of an elastic beam with boundary inerter-enhanced nonlinear energy sinks

Nonlinear vibration and dynamic stability analysis of an axially moving beam with a nonlinear energy sink

Dynamic analysis of the nonlinear energy sink with local and global potentials: geometrically nonlinear damping

Performance analysis and optimization of bimodal nonlinear energy sink

Time delay-based mitigation design and nonlinear resonance of large amplitude vibration of the cable-stayed beam