Abstract:Sample preparation is a crucial set of unit operations that is performed on the sample to make it suitable for detection or sensing. Miniaturization of the sample preparation steps and their integration with the sensor is important for developing truly point of care sensing systems or the so called “Lab-on-Chip” devices. An ideal point of care device should be able to take raw sample in and provide information out. Sample preparation in such a setting should be performed with minimal intervention by the user, in an automated way and possibly without the use of external reagents. Although many microfluidic Lab-on-Chip devices have been developed with integrated sample preparation capability, the focus of the innovation has been on the sensor itself. They have typically used the same sequence of unit operations as the laboratory tests that they are based on and do not necessarily exploit the advantages of miniaturization to optimize sample preparation. We posit here that these devices should be developed with a focus on easy and simple sample preparation with minimal to no user intervention in order to find widespread applicability Here, we present examples of developing devices with focus on redesigning sample preparation methods to enable ease of use. First we demonstrate a simple microfluidic device (shown in Figure 1a) that can be used to analyse the cell free DNA concentration, a biomarker that is a prognostic indicator of mortality, at the bedside of septic patients. The device can separate cell free DNA from whole blood, concentrate it and quantify the concentration in a small form factor and under 5 min using small amount (10 uL) of blood. The device exploits the advantages of miniaturization in combining several unit operations that are normally performed sequentially in the laboratory so that the assay can be done faster. In another example, we exploit the advantage of miniaturization to perform bacterial culture assays faster. Bacterial culture and staining is the oldest method of diagnosis of bacterial infection. However, they are slow and take anywhere between 1 day (E.Coli) to few weeks (Mycobacteria). Molecular assays based on nucleic acids or proteins as biomarkers have emerged over the past few decades as faster methods to identify a pathogen. However, these assays do not provide viability or drug effectiveness information that are useful for medical professionals to formulate their treatment. In order to make culture based detection faster, we have developed a novel platform that automatically segments a sample in thousands of nanovolume wells. The device design is optimized to automatically segment the sample using a simple squeegee and under 1 min (shown in Figure 1b) which is suitable for point of care applications in resource poor settings. Metabolic activity of the bacteria aliquoted into these nanowells can be measured as an indicator of their presence and viability. By segmenting the sample into small volumes we show that the analysis time can be made much smaller especially at low concentrations. We also demonstrate single cell detection. The compact form factor of these devices and the minimal need for external reagents make them ideally suited for point of care testing. Figure 1

Integrated Point-of-Care Immune Cell Analyzer with Rapid Blood Sample Reaction and Wide Field-of-View Detection

Engineering a Universal and Fully Automatic Analyzer for Multichannel and On-Site Biochemical Detection in Body Fluids

Integrated microfluidic pneumatic circuit for point-of-care molecular diagnostics

Rapid Enumeration of CD4 + T Lymphocytes Using an Integrated Microfluidic System Based on Chemiluminescence Image Detection at Point-of-care Testing

(Invited) Simple Microfluidic Sample Preparation for Point of Care Diagnostics

Paper/Soluble Polymer Hybrid-Based Lateral Flow Biosensing Platform for High-Performance Point-of-Care Testing

Fully Integrated and High-Throughput Microfluidic System for Multiplexed Point-Of-Care Testing.

Additive manufacturing leveraged microfluidic setup for sample to answer colorimetric detection of pathogens

Immunological Analyses of Whole Blood via “Microfluidic Drifting” Based Flow Cytometric Chip

Micro-a-fluidics ELISA for Rapid CD4 Cell Count at the Point-of-care.

An integrated rotary microfluidic system with DNA extraction, loop-mediated isothermal amplification, and lateral flow strip based detection for point-of-care pathogen diagnostics

Integrated hand-powered centrifugation and paper-based diagnosis with blood-in/answer-out capabilities

A Highly Integrated Lab-on-a-disc Immunoturbidimetric Assay from Whole Blood with On-Chip Calibration

A Fully Integrated Distance Readout ELISA-Chip for Point-of-care Testing with Sample-in-answer-out Capability.

A digital microfluidic platform coupled with colorimetric loop-mediated isothermal amplification for on-site visual diagnosis of multiple diseases

An automated and portable microfluidic chemiluminescence immunoassay for quantitative detection of biomarkers

Fully integrated and automated centrifugal microfluidic chip for point-of-care multiplexed molecular diagnostics

Design and Fabrication of Capillary-Driven Flow Device for Point-Of-Care Diagnostics

Quantitative particle agglutination assay for point-of-care testing using mobile holographic imaging and deep learning

EFFICIENT DEVELOPMENT KIT FOR WELL-TO-CHIP CUSTOMIZATION AND DETECTION OF COLORIMETRIC AND FLUORESCENCE BASED MICROFLUIDIC IMMUNOASSAYS

DropLab: an automated magnetic digital microfluidic platform for sample-to-answer point-of-care testing—development and application to quantitative immunodiagnostics