Abstract:Abstract Novel modified Ni/Fe layered double hydroxides with different morphology of spherical – like shape were fabricated via using urea as a ligand and glycerol (Ni/Fe LDH/GL) with Ni:Fe molar ratios of 2:1 by the simplest co -precipitation method. Also, for comparison purposes, Ni/Fe LDH was synthesized to be used as a control one. A suggested interpretation for the morphology change was also given. The materials were characterized by X-ray diffraction (XRD), The Fourier transform infrared (FT - IR) spectroscopy, field emission scanning electron microscopy (FESEM), EDX for elemental analysis, high resolution transmission electron microscopy (HRTEM), Brunauer, Emmett, and Teller (BET) equation, particle size distributions and Zeta potential measurements. In addition, the synthesized materials were used as adsorbents for removal of potassium dichromate from aqueous solutions under various experimental conditions. The adsorption of Cr (VI) was strongly pH dependant and the pH PZC was studied. Kinetic studies were evaluated through different models including, pseudo first and second orders, mixed 1, 2 orders, intra particle diffusion and Avrami models. For adsorption isotherms, two-parameter models (Langmuir, Freundlich and Temkin) and three parameter models (Sips, Langmuir-Freundlich and Tooth) were investigated showing maximum adsorption capacity of 50.43 mg/g and 136.05 mg/g for Ni/Fe LDH and Ni/Fe LDH/GL, respectively. Also, the effect of temperature was investigated at (23, 35, 45, 55 °C) and the thermodynamic parameters (∆H°, ∆S° and ∆G°) were calculated showing exothermic and spontaneous adsorption process. The effect of coexisting anions (Cl − , SO 4 2− and HPO 4 2− ) and humic acid at different concentrations on the removal efficiency of dichromate ions was investigated. Chemical stability and recyclability of these adsorbents were also studied. The intermolecular hydrogen bonds formation between dichromate ion, urea, glycerol, LDH was explored by Monte Carlo simulation This study suggested that the modified Ni/Fe LDH/GL materials were promising nanoadsorbents for efficient potassium dichromate removal.

Hydrothermal synthesis of a novel nanolayered tin phosphate for removing Cr( iii )

Nanolayered tin phosphate: a remarkably selective Cs ion sieve for acidic waste solutions

Fast and Efficient Removal of Cr(VI) to Ppb Level Together with Cr(III) Sequestration in Water Using Layered Double Hydroxide Interclated with Diethyldithiocarbamate.

Combination of interfacial reduction of hexavalent chromium and trivalent chromium immobilization on tin-functionalized hydroxyapatite materials

Synthesis of Tin(II) Phosphate Open Frameworks Using Isomers of 1,2‐diaminocyclohexane As Template

Mesoporous Na+-SiO2 Spheres for Efficient Removal of Cr3+ from Aqueous Solution

Synthesis of nickel–iron layered double hydroxide via topochemical approach: Enhanced surface charge density for rapid hexavalent chromium removal

Adsorption of aqueous Pb(II), Cu(II), Zn(II) ions by amorphous tin(VI) hydrogen phosphate: an excellent inorganic adsorbent

Highly effective removal of thallium(I) by nanostructured titanium pyrophosphate from acidic wastewater

Synthesis of Polypyrrole-Modified Layered Double Hydroxides for Efficient Removal of Cr(VI)

Fabrication of a Novel NiFe2O4/Zn-Al Layered Double Hydroxide Intercalated with EDTA Composite and Its Adsorption Behavior for Cr(VI) from Aqueous Solution

Hydrothermal carbonization synthesis of a novel montmorillonite supported carbon nanosphere adsorbent for removal of Cr (VI) from waste water

A novel ternary magnetic Fe3O4/g-C3N4/Carbon layer composite for efficient removal of Cr (VI): A combined approach using both batch experiments and theoretical calculation

One-step fabrication of dual functional Tb3+ coordinated polymeric micro/nano-structures for Cr(VI) adsorption and detection

Hydrothermal synthesis of layered zirconium phosphates and their intercalation properties

The use of Sn(II) oxy-hydroxides for the effective removal of Cr(VI) from water: Optimization of synthesis parameters

Tin Oxide Nanoparticles via Solar Vapor Deposition for Hexavalent Chromium Remediation

Removal of CrO42-, a Nonradioactive Surrogate of 99TcO4-, Using LDH-Mo3S13 Nanosheets

Fabrication of PAN Electrospun Nanofibers Modified by Tannin for Effective Removal of Trace Cr(III) in Organic Complex from Wastewater

Ultrasonic-assisted preparation of interlaced layered hydrotalcite (U–Fe/Al-LDH) for high-efficiency removal of Cr(VI): Enhancing adsorption-coupled reduction capacity and stability

Novel synthesis of Ni/Fe layered double hydroxides using urea and glycerol and their enhanced adsorption behavior for Cr(VI) removal