Abstract:High level aerodynamic performance has been always expected for the axial flow compressors, and it is the consistent goal for axial flow compressor research. To achieve such a goal, the incorporation of CFD with optimization algorithm and surrogate model in blade geometry optimization has become a common practice and been used extensively. But the conventional surrogate model based on merely initial sampling often deviates from the real optimization problem during optimization process and then brings the optimizer to search locally, leading to the compromised optimal results. There are yet much to do to improve such optimization design method. An optimization method of surrogate model being updated by sequential sampling strategy is developed to achieve global optimal design geometry and permit high-level of aerodynamic performance for axial flow compressor. Preliminary Kriging surrogate model is constructed with a small number of selected DOE samplings, where the multiple optimization objective functions are obtained based on CFD simulations. The optimization is performed on the surrogate model with NSGA-II optimization algorithm and Pareto fronts successively obtained. To improve the surrogate model, the MSE (Mean Squared Error) criteria is used to select the refinement point from the newest Pareto front, and it is used to update and improve the surrogate model gradually during the optimization. Such adaptive feature of the surrogate model has enabled the optimizer to search globally. The method is used to optimize transonic Rotor 37 at design flow rate, where the blade shape is varied simultaneously in terms of sweep and lean, and the geometry is optimized. In the converged Pareto front, abundant candidate designs with significant performance gains are produced. Three points over the Pareto front are selected and analyzed to take an insight into the optimization effectiveness. Overall performance curves of optimized geometries are predicted over the entire flow range and they are significantly improved compared with the original ones. Significant overall performance gains arising from the blade optimization are supported by the improved flow behavior. The overall pressure ratio or efficiency gains of the optimized blades are attributed to the significant improvement in the radial distribution of aerodynamic parameters. Further research shows that the shock structure is changed and separation zone is reduced with the optimized blades, which are the major reasons for the improvement of the aerodynamic performance of optimized blades.

Research on the Performance State Assessment of Aero-Engine Compressor Driven by Realistic Digital Aero-Engine Structure Model

Effect and Mechanism of Roughness on the Performance of a Five-Stage Axial Flow Compressor

Flow Reconstructions and Aerodynamic Shape Optimization of Turbomachinery Blades by POD-based Hybrid Models

Full Stage Axial Compressor Performance Modeling Incorporating the Effects of Blade Damage due to Particle Ingestion

Research on a Method for Online Damage Evaluation of Turbine Blades in a Gas Turbine Based on Operating Conditions

Accurate Model Construction of Deformed Aero-Engine Blades for Remanufacturing

Performance Evaluation of Damaged Blades Using Numerical Simulation and Machine Learning

Towards Predictive Maintenance of a Heavy-Duty Gas Turbine A New Hybrid Intelligent Methodology for Performance Simulation

Aerodynamic Performance Evaluation of Subsonic Compressor Cascade Blade with Leading-Edge Damage

An Improved Body Force Model to Simulate Blade Loading Variation Under Various Operating Conditions in Transonic Axial Flow Compressor

Three‐dimensional Deformation Measurement of Aero‐engine High‐speed Rotating Blade Surface Based on Stroboscopic Structure Digital Image Correlation Method

Three-Dimensional Compressor Blading Design Improvements in Low-Speed Model Testing

KBMeasure: small sample in-situ damage automatic measurement method based on the combination of keypoints detection and binocular 3D reconstruction for aero-engine blades

Research on Laser Additive and Milling Subtractive Composite Remanufacturing Process of Compressor Blade

THREE-DIMENSIONAL BLADE SHAPE OPTIMIZATION FOR A TRANSONIC AXIAL FLOW COMPRESSOR THROUGH INCORPORATING SURROGATE MODEL AND SEQUENTIAL SAMPLING

A novel graph structure data-driven crack damage identification for compressor blade based on vibro-acoustic signal

Performance Characteristic Modeling for 2D Compressor Cascades

Development of a Throughflow-Based Simulation Tool for Preliminary Compressor Design Considering Blade Geometry in Gas Turbine Engine

Optimal Design and Analysis of a High-Load Supersonic Compressor Based on a Surrogate Model

A novel method for aeroengine performance model reconstruction based on CDAE model