Abstract:It is well known that a high voltage across the coupling plates of a capacitive power transfer (CPT) system is beneficial to increase its power transfer capability, but a high voltage may lead to high insulation requirements and cause safety concerns. This article proposes a compensation design method for achieving the maximum power of CPT systems under coupling voltage constraints. Based on a simplified capacitive coupling model and thorough power transfer characteristics analysis, a family of compensation topologies are derived to maintain a 90° phase shift between the input and output voltages across the CPT coupler against load variations, so that the coupling voltages (which practically need to be limited) are fully utilized for power transfer purposes. A full design process for determining the compensation parameters is presented, and an example 2-kW CPT system is built and tested using LC compensation at the primary side to boost the input voltage to the coupler; and one of the proposed compensation topologies (CLC) at the secondary side for impedance transformation of a given load with a specified voltage and power requirements. Experimental results show a good agreement with theoretical analysis, which demonstrate the phase difference between the voltages before and after the coupler is kept nearly 90°, and a maximum possible power transfer of 2.039 kW is achieved under the given voltage limits and coupling conditions. A system end-to-end (dc–dc) efficiency of 90.29% is obtained when the air gap between the coupling plates is 150 mm, and the coupling capacitance is only 13.84 pF.

Parameter Design Method With Constant Output Voltage Characteristic for Bilateral LC -Compensated CPT System

A Parameter Design Method for High Performance LCLC-LC Compensated CPT Systems

Parameter Design Method with All Capacitor Voltage Stresses Optimization of LCLC-LC Compensated CPT System

A Nonmonotonic Parameter Design Approach for Compact Capacitive Power Transfer

An Improved Design Method Based on a Multi-Plate Coupler Structure for Capacitive Power Transfer with Wide Ranges of Misalignment and Loads

Balanced Design Method for LCL/LCL Compensation Achieving Wide Load Range and High Misalignment Tolerance

Tuning Method Based T-model for LCC/S Compensated IPT System with Constant Current Output Characteristics

Minimizing Primary Current Based on Asymmetric Parameter Design Method under Wide Load Range and Variable Coupling Condition in Inductive Power Transfer Systems

Design of CPT System With Multiple Constant Output Voltage Pickups Using Inverse Hybrid Parameters of Capacitive Coupler

A Circuit Design Method for Constant Voltage Output With Zero Phase Angle and Minimum Coupler Voltages in Capacitive Power Transfer

A Capacitive Power Transfer System Designed for Stable Outputs with Load Variations

Compensation Network Design of CPT Systems for Achieving Maximum Power Transfer Under Coupling Voltage Constraints

Design of Constant-Voltage and Constant-Current Output Modes of Double-Sided LCC Inductive Power Transfer System for Variable Coupling Conditions

A Two-Stage Parameter Optimization Method for Capacitive Power Transfer Systems

Design of an LCC-SP Compensated WPT System and Parameters Tuning Method for Misalignment Condition

A simplified model and its parameters optimization methodology of LCC‐S WPT compensation network under dual‐side‐detuned conditions

Modified Parameter Tuning Method for LCL/P Compensation Topology Featured with Load-Independent and LCT-unconstrained Output Current

Frequency and Parameter Combined Tuning Method of LCC–LCC Compensated Resonant Converter With Wide Coupling Variation for EV Wireless Charger

A Novel Parameter Tuning Method for a Double-Sided LCL Compensated WPT System with Better Comprehensive Performance

An LCLC-LC-Compensated Capacitive Power Transferred Battery Charger With Near-Unity Power Factor and Configurable Charging Profile

A Constant Output Capacitive Wireless Power Transfer System based on Parity-Time Symmetric