Abstract:Quantitative seismic reservoir characterization is one of the finest advancements in seismic technologies for sub-surface exploration of fluvial depositional systems (FDSS). These FDSS energy resources are combinations of thinly distributed gas-bearing trapping configurations such as the meander sandy channels (CH) along with aggradational parasequences (PBARS) of transgressive system tract (TST), which are developed during the extensive rise of sea-level followed by the rigorous standstill, and hence, which fills the PBARS and CH stratigraphic traps with possible hydrocarbons due to vertical and lateral changes in the facies. These thin-bedded CH and PBARS are very sensitive to a certain frequency component, which bandlimited seismic amplitudes (product of density and velocity) fail to quantify the paleo-thickness, paleo-velocities, paleo-densities, paleo-inclinations, paleo-geomorphology, vertical and lateral extents etc. of the stratigraphic traps. These parameters provide deep insights for quantitative-based stratigraphic reservoir characterizations. This study utilizes the spectral acoustic waveform seismic components and broadband spectrally-decomposed acoustic spectral waveform-based instantaneous lateral thickness variability static simulations (SLTRS) to quantify the FDSS of Southwest Pakistan. The 9–57 Hz bandwidth processed frequency volume reveals a poor tuning frequency component of 28 Hz and lateral extent of the stratigraphic, which failed to predict the direct geomorphology of PBARS and CH. 43-Hz spectral waveform could reveal the geomorphology with parallel-to-wavy seismic reflections (SRCS) for indicating the presence of meandering channels and PBARS. However, this attribute failed to predict the stratigraphic pinch-out zones and exact paleo-inclination of the PBARS and CH. The SLTRS have resolved the parallel-to-wavy SRCS with seismic sedimentological constraints, i.e., lithology-impedance contrast, phase of hydrocarbon generation, tuning frequencies, and thickness of the stratigraphic reservoir configurations, which implicates the channels systems at the shelf position of the basin. These attributes were unable to be predicted using the bandlimited seismic amplitudes. The SLTRS have simulated the gas zone with 2.921 gm./c.c simulated gas density [SGD], 7880 m/s simulated gas velocity [SGV], 19–25 m simulated gas thickness [SGT], and 1° simulated inclination of PBARS, which implicates the high sinuosity CH and PBARS stratigraphic trap [SAS]. Similarly, for transgressive-to-retrogradational sealing configurations, SLTRS have resolved 2.864 gm./c.c [SGD], 7365 [m/s] [SGV], 12–14 m simulated seal thickness [SST], and >2° inclination, which implicates the transgressive seal. The vertical and lateral extend of the stratigraphic trap was 16 m (proximal locations) (eastern margins) to 60 m (basin wards) (western margins) of the gas field. The quantitative uncertainty analysis between the SGD [gm./c.c], SGT [m] and SGV [m/s] show a very strong R 2 > 0.90 with robust sea-level trends and the development of the aggradational to retrogradational parasequences. 43 Hz spectral waveform-based SLTRS have imaged very strong lateral amplitude attenuations observed from the 2.883 to 2.864 gm./c.c [SGD], 22–21 m [SGT] on inverted density simulations, 7535–7365 m/s [SGV] on inverted velocity simulations, and 19–15 m [SGT], which confirms the development of the hydrocarbon-bearing PBARS during the standstill sea-level of TST. Consequently, these stratigraphic endeavours may serve as an analogue for the worldwide exploration of FDSS with similar geology and basin configurations.

Quantitative seismicity of shale gas reservoirs of the Lower and Middle Indus Basin (Pakistan) revealed from instantaneous spectral decomposition-based inverted Vp/Vs ratio simulation

Spectral Decomposition-Based Quantitative Inverted Velocity Dynamical Simulations of Early Cretaceous Shaly-Sandstone Natural Gas System, Indus Basin, Pakistan: Implications for Low-Velocity Anomalous Zones for Gas Exploration

Seismic Attributes and Inverse Quantitative Static Density–Porosity–Constraint Reservoir Simulations of Naturally-Fractured Hydrocarbon-Bearing Lower Cretaceous Shallow-Marine Architectures, Onshore Indus, Pakistan

Seismic attributes and spectral decomposition-based inverted porosity-constrained simulations for appraisal of shallow-marine lower-Cretaceous sequences of Miano gas field, Southern Pakistan

Appraisal of reservoir quality for hydrocarbon-bearing deep-water Miocene sandstones incised valley, south-east Asian offshore Indus: An application of seismic attributes and instantaneous spectral porosity quantitative reservoir simulations

Quantitative appraisal of tectonically-influenced hydrocarbon-bearing Late-Cretaceous fluvial depositional system, Southwest Pakistan using spectral waveform-based instantaneous lateral thickness variability static simulations

Application of seismic attributes and quantitative-based instantaneous static reservoir simulations for quantitative imaging of lithology and fluids of Lower-Cretaceous hydrocarbon-bearing delta traps, Onshore, Pakistan

PNN Enhanced Seismic Inversion for Porosity Modeling and Delineating the Potential Heterogeneous Gas Sands via Comparative Inversion Analysis in the Lower Indus Basin

Continuous Wavelet Transformation of Seismic Data for Feature Extraction

Controls on Reservoir Heterogeneity of a Shallow-Marine Reservoir in Sawan Gas Field, SE Pakistan: Implications for Reservoir Quality Prediction Using Acoustic Impedance Inversion

Data-driven exploration in complex basins: A critical aspect of new prospect delineation in thin sands using simultaneous seismic inversion

Delineating the shallow‐marine stratigraphic traps of Lower‐Cretaceous incised valley sedimentation, Pakistan using post‐stack seismic colour inversion

Delineation of stratigraphic traps within the basin floor fans of Miocene sedimentary sequences, offshore Indus, Pakistan using inverted acoustic impedance simulations

Evaluation of Gas Potential in Early Cretaceous Shale Lower Indus Basin, Pakistan

Seismic Imaging of Strata Truncating to Base Miocene Unconformity Integrated with Petrophysical Analysis of Mianwali Re-entrant, Pakistan: a Case Study from the Upper Indus Basin of Pakistan

Assessing the hydrocarbon potential of the Kadanwari gas field using integrated seismic and petrophysical data

Deciphering the low-frequency seismic signals in the Weiyuan Shale gas field: implications for reservoir and structural heterogeneity

Quantitative characterization of tight gas sandstone reservoirs using seismic data via an integrated rock-physics-based framework

Sand-ratio distribution in an unconventional tight sandstone reservoir of Hangjinqi area, Ordos Basin: Acoustic impedance inversion-based reservoir quality prediction

Unlocking thin sand potential: a data-driven approach to reservoir characterization and pore pressure mapping

Gas detection with the influence of a coal layer using a variational mode decomposition–Based highlight volumes extraction method in a tight sandstone reservoir